Jump to content
New Publication - Ship Modeler's Handbook - Temp out of stock ×

RGL

Members
 View Profile  See their activity

  • Posts

    5,308

  • Joined

  • Last visited

 Content Type 

Everything posted by RGL

  1. RGL
    Let the Dazzle begin
  2. RGL
    Masking starts, what a pain
  3. RGL
    Painting time, next few hours of masking to get the gantries covered.
  4. RGL
    Thanks, the Hasegawa PE give you an option for a cover on the bridge that was unique to the Gambier bay or for all other types that Flyhawk doesn’t. Essentially the Hasegawa set is very limited but nicer with tighter tolerances. The Infini radar comes with turned brass pedestals and is hands down nicer. Both Flyhawk and Hasegawa continue with manufacturers making disjointed and confusing instructions which means using three sets took me three days and I’m still confused.
  5. RGL
    The bridge plugs right in very nicely, I’ll paint it separately
  6. RGL
    Ready for paint, the bridge done. Bloody hard work, I used the best parts of the Flyhawk and Hasegawa PE sets and swapped out three different radar sets for Infini radars
  7. RGL
    I apply it with a sliver of offcut brass
  8. RGL
    So for safety I painted and masked up the lower hull, gantries have been glued on, there are support trusses and some other stuff that I’ll glue on it tomorrow.
  9. RGL
    Yes, they contradict each other.
  10. RGL
    All 4 parts of the gantries detailed up. Lots of railings etc to go but for ease of painting and weathering I’ll leave them open for now.
  11. RGL
    Hard corners where things would rub or bump, such as the anchors hitting the hull, plates that would have paint worn away, that would be the chipped bits then the rust would run from them. Have a look at my Borodino or Graf Zeppelin’s rust.
  12. RGL
    Added a bit more detail, added fuel hoses and folded up fire hoses from offcut PE
  13. RGL
    These gantries are very very busy, lots of Details to add, fuel, fire and other stuff.
  14. RGL
    Yes
  15. RGL
    A full day cutting out the flight deck gantries and adding what limited PE there is. I won’t add the railings for nets until painted but lots of super detailing to go. apparently the fueling plans and barrier controls and catapault controls were the same as the Essex carriers
  16. RGL
    I need to move onto the dazzle pattern soon. Thing is, the colours (from the chart above) are different to the kit plans as well as the masks and dazzle design are different between the Gambier bay and Thetis Bay
  17. RGL
    The focsle painted and covered. deck added
  18. RGL
    Lower gantries, the PE is supposed to sit on top of the plastic, so I’ve retained the sponsons and cut away the rest of the plastic. No such luck with the ones that run along the flight deck and nowhere as near as good as a Pontos set.
  19. RGL
    Hull joined up, comes together very nicely, I’ve put the fuel lines on the side of the ship,
  20. RGL
    I make all mine so they can be removed at any time from the base. You’ve got lots of ‘handling’ to do yet. Don’t be in a rush to put the deck down or stick her in. Once you get the bootstrap and lower hull painted I’d mask it off (acrylics do scratch easily) then put her on as you don’t need to rotate it as much.
  21. RGL
    Yes I’ve read it, great story
  22. RGL
    I truely don’t know yet! There are 18 hellcats and I don’t think Infini makes upgrades for them. I now have three sets of radars for her so I’ll use the most detailed. As they were all cookie cutters I just have to change the name!
  23. RGL
    Open source Reference from here: https://www.hnsa.org/manuals-documents/booklets-of-general-plans-online/ cve90.pdf
  24. RGL
    Courtesy of Reddit
  25. RGL
    The kit is quality as far as I can see, as usual there is a very expensive Hasegawa upgrade PE and Deck set, a nice Flyhawk upgrade set, and a full poster of the Gambier Bay (good story behind her, I also have the AOTS of her) and a painting and rigging guide. No one that I have found has built this renditions and it’s interesting. There is only one item on the deck I can’t identify but I have bought tractors, jeeps, Hellcats and Catalinas and had a Grumman Duck 3D printed for her. I intend on spending the rest out the year planning the build before flying anything.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...