Jump to content

RGL

Members
  • Posts

    5,547
  • Joined

  • Last visited

Everything posted by RGL

  1. The chipping is there but I covered it in dust. These things would have been filthy.
  2. Of note, the FT17 at our memorial didn’t have enough track tracks so they cast their own. It still has a bullet lodged in the radiator. My plan is to have it all ya hated open. The Meng kit first released was a full interior kit, which cost twice as much as the later release with no engine (I got it cheap still from China. I also have a French motorcycle from CSM and lots of figures
  3. Next build, this will be a diorama, with a lovely resin kit from U-Models with a Meng FT 17 with full interior.
  4. I think this’ll do but I am open to suggestions
  5. Chipping and washes, there are 2 planks on the sides which I replaced with real wood. Next will be mud, when dry I’ll add dust. That should do maybe. I was then thinking if I could have it towing an artillery piece ?
  6. Ok I’m rubbish at tracks, I used the Blast models upgrade which are very fragile and snap very easily. Will cover sins in mud.
  7. I didn’t even bother to do the machine gun and cannon bases, just glued them on. added the signal panel harness which I learnt from a German bloke on Utube and confirmed my reference photos. serendipity? I have after market tracks I bought for another kit which is wrong!
  8. I just read that, I’ll just glue them straight onto the side panel as you can’t see inside anyways. I’ve got some tracks from Blast models which I’ll try as well
  9. I see Doc has also just started this kit. I was always planning on doing it after the little tanks so here we go! Blast models to really nice upgrades which I may use the tracks and stowage. I am about to do a series of French ww1 armour as I got this kit and a French Tank Carrier on FB Marketplace for steal. I them have some amazing German and English stuff to go.
  10. Sweet, this is my next built OOB! I got it dirt cheap and look forward to following you!
  11. Yeah it’s because the whole thing was crushed and rebuilt
  12. Mud ! Part 1, washes done, tomorrow I’ll make it dusty
  13. Ok, chipping done and a clear coat. Washes, mud etc next
  14. So this is the practice piece, a couple of shades of blue (medium then light) and a blue filter. The tracks a mix of black and brown. I’ll leave it dry them a clear coat
  15. So the first one I got was crushed, so I’ve repaired it.
  16. There is a video on U-tube of it from its tests in September 1918
×
×
  • Create New...