Jump to content
Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click on photo to order. ×

marsalv

NRG Member
 View Profile  See their activity

  • Posts

    597

  • Joined

  • Last visited

 Content Type 

Everything posted by marsalv

  1. marsalv
    Thanks to all for very nice comments. To RedDawg - blackening solution is desribed in post #206, with regard to nuts and bolts I used the following parts that simulate bolts and nuts: http://www.litomysky.cz/kadee/kad088.htm. So the guns are finally done, rigging will be added immediately prior to installation aboard.
  2. marsalv
    Thank you Greg. After painting are the carriages ready for attaching of guns.
  3. marsalv
    Thank you guys. Because I have no duplicator, I had to turn each gun separately (many time and many destroyed material). Details of carriages added.
  4. marsalv
    To Allan - the monogram is not my production, these are made by "etching" company (http://www.etchworks.cz/). Normally are parts etched simultaneously from both side, here is etching made only from one side. Before gluing is necessary to roughen both surfaces (eg. tweezers) then glue adheres well (I had to repair two pieces from 20). The solution for blackening - heated solution water and patina for Tiffany technique (ratio 50 : 1) (http://www.vensy.cz/vensy/eshop/12-1-Tiffany-technika-cinovani/31-2-Chemie-pro-cinovani/5/345-Patina-cerna-tiffany-technika) Carriages assembly.
  5. marsalv
    Monogram is etched from brass 0,2 mm and glued with CA. The blackening of guns is done a I started preparation of parts for gun carriages.
  6. marsalv
    Thank you guys . I added pins and royal emblems on the barrels and they are now ready for blackening.
  7. marsalv
    So the guns are finally done. Now I do not want to see a lathe for a long time.
  8. marsalv
    Wyzwyk, Alex and druxey - thanks for nice comments. I started the gun "production". In this moment is done the easier part, the more difficult is still ahead of me.
  9. marsalv
    Hi to all, so after a long break back to "work" . To Tom - used wood is boxwood and steamed pear To Nigel - No, I don´t. To Greg - I had to instal the hanging knees before beams due colloring of inner bulwarks, but I like it. To aviaamator - sorry for flaws. I agree that real part of deck is little bit simplified because the interior will not be visible. Sorry for delay with reply. As another part I chose the production of guns. Guns will be turned from brass, the problem is that turning is a completely new thing for me and so far I'm learning it. I've ruined so much material over and spent so much time that would be cheaper to buy finished guns. On the other side it is the great challange for me. I hope that in a few days I will be able to "show" some result. For now at least I prepared various eyelets and hooks.
  10. marsalv
    Hi Daniel, the blue color is acrylic paint from czech producer (http://obchod.agama-model.cz/cz-detail-235034-r29-p-tmava-sedomodra.html). Aft cabin bulkheads are finished and installed on the deck.
  11. marsalv
    Thanks to all for very nice comments. To toms10: The lettering is made with scroll saw. The same procedure is used for ornaments (with some hand carvings). To EdT: I am very happy that you like my work because YOU are the true master on this forum . I started with preparation of aft cabin bulkheads.
  12. marsalv
    Stern is completely finished .
  13. marsalv
    Thanks to all guys . Stern gradually begins to fill up. There remains to stick ships name and some moldings and the stern will be completely finished.
  14. marsalv
    Thank you Erik and WackoWolf. Here are some next pictures.
  15. marsalv
    Thanks to all . I continue with instalation of windows.
  16. marsalv
    Thanks guys for nice comments. To wyzwyk: Sorry, I did not good understand your questiuon. Could you please explain what did you mean?
  17. marsalv
    Thank you Dirk. Moldings and upper finishing of the gallery.
  18. marsalv
    Thanks to all for nice comments . Few last days I colored inside and outside of the hull. Now I am able to install prepared parts.
  19. marsalv
    Thanks guys, I decided to install the hanging knees now because the inner part of bulwark will be colored. Some pictures of parts prepared for the stern.
  20. marsalv
    Instalation of hanging knees.
  21. marsalv
    Thank you albert and Burroak. I would like to wish everyone who watches my log Happy New Year and of course a lot of joy from your hobby. Preparation of cathead. Before final installation will be supplemented by even ornaments.
  22. marsalv
    Hi guys, many thanks, I am really happy that you like my build. I completed rough construction of rear galeries.
  23. marsalv
    Thank you guys for very nice comments , but there are much better masters as me on this forum. I finally finished the outside hull planking.
  24. marsalv
    Thank you Greg . I have started making of the stern decorations.
  25. marsalv
    After a longer break I continue to work on Pandora - lower finishing.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...