Jump to content

Old Collingwood

Members
  • Posts

    11,773
  • Joined

  • Last visited

Everything posted by Old Collingwood

  1. Evening all, bit more progress (not sure you can call it that) I decided to have a go at priming my pieces of railing I wanted to use - so I applied it with my brush, I put a few light coats on drying between, anyway I noticed the whole fret had stuck to my mat - gently trying to free it - Yep it broke most of the rails with only a few intact (bent but usable) so I went a head a cut them away but most of the paint had stuck to the mat and not the rails, so I decided to scrape off the worst back to metal and try to fit Two sections small with a centre bend, they went down kind of Ok, then I tried Two slightly longer ssections (not massive long) but how ever many times I tried to fit them - no good. I will be honest and say at this scale the railings are beyond me and I do not have the full set now anyway - so I am going to build her minus the railings. OC.
  2. Thank you kindly @RogerF @mikegr I will have to have a think, I think the PE might be too delicate and thin to sand, another option would be hand paint just the rails I need to add for the boat deck, as the Vallejo Surface Primer is so good at going on even with a brush - its shrinks down when it dries, and the AP507A is the Lifecolour range and thin for airbrush work, then the top coat is very good. OC.
  3. Fighting an internal battle with myself - prime / paint / flat top coat the PE frets, or un treat attach and prime / paint by brush? my worry is that handling the rails on the top boat deck sections (some need bends) after cutting then away will lead to peeling away / scuffing etc from holding them while I twist them to shape and glue them in place. Any ideas folks? OC.
  4. Welcome to the family Michael, so many of us here in the family of the site are so skilled and artistic and have some vastly varied other abilities, I too love music but from the technical aspect of creating it with keyboards (mainly digital now). You will have a lot of fun here - lots and lots of really nice people in our little family here. OC.
  5. Chris I found this article on the actual crate. OC. https://wartimeni.com/article/aviation-incidents-in-ulster/supermarine-spitfire-bm144-bangor-co-down/
  6. Evening all, a bit more done this eve - Two tiny Triple platforms made from PE and resin, then the kit Triple units fitted, I dry fitted a few of the assemblies to check how they fit. OC.
  7. Thank you kindly Alan - still have the rails to go on that level - they will be primed then painted (again both layers by brush) OC.
  8. Evening all, this evening was taken up with mini brush painting of the boat deck details I added yesterday. OC.
  9. Mods - quick question - why do some of theses longer posts not auto locate to the latest posting - Often I have to manulay scroll down to get to it. OC.
  10. Mark how about adding the first posts and going up to the first tops level either shrouded/channels or un shrouded but with the channels and deadeyes fitted. OC.
  11. Thank you for the very nice comments - yep I will get out my tiny brushes to paint the small details, will probably do the same with the PE railings that still need to go on, as I can not airbrush them when on and think the paint will be dameged from the handling with tweezers etc. OC.
  12. Evening all, hope everyone's holidays are going well - so I decided that one days tv and couch was enough so I did a wee bit more on Hood, there was some more ammo lockers and vents to be added including some rather nice resin vents, they will receive a few coats of paint next. OC.
  13. Really nice work there Chris - those railings make such a difference at bringing all that detail to life. OC.
  14. Just found out we have a connection through our builds - HMS Penelope, HMS Lance and my HMS Aurora all served together in November 1941 in Force K - cool. OC.
  15. "Eye - eye" the man is on a new quest into Brilliant land - deffo in for this as I am all your Superb builds. OC.
×
×
  • Create New...