ancre La Créole 1827 by archjofo - Scale 1/48 - French corvette

[archjofo]

Hello Greg,

You're right, of course, making the rigging elements takes longer.
I hope that I will soon be able to present the new mizzen topgallant yard ready and finished.

At the moment I'm still researching how to carry out the tyes for the royal yards. I originally thought that these would be done in the same way as the topgallant yards, but obviously these are designed to be simpler.
 

[archjofo]

Continuation: Equipping the mizzen topgallant yard - Vergue de perruche
After the small mishap, as reported, I have now made a new mizzen topgallant yard and fully equipped it. This means that the topgallant yard chapter can be put to bed until it is installed on the model.
Here is a picture of the finished mizzen topgallant yard. 

And another picture with the tye.

 
The next picture shows different yards of the French corvette in size comparison. In the center you can see the mizzen topgallant yard. Above it is the mizzen royal yard and finally the middle section of the main yard is shown below.
 
The next step is to equip the royal yards with the necessary rigging elements. Then I'll finally have finished fitting out the yards.
To be continued ...

 

[Thukydides]

Your rope work is an inspiration Johann.