Lucius Molchany Posted April 8, 2017 #1 Posted April 8, 2017 Not sure if this is the right section,but I purchased abd routed the display base for my AL Herminoe. Ryland Craze, Canute, Eddie and 3 others 6 Quote
jud Posted April 8, 2017 #2 Posted April 8, 2017 Nice job. Looks like a necessary fitting to me, you get no complaining from me for placing your routed and fitted Base here. Eddie, Canute and mtaylor 3 Quote
Lucius Molchany Posted April 9, 2017 Author #3 Posted April 9, 2017 I wonder if I should get a forstner bit and inlay the brackets into the surface. Canute and Eddie 2 Quote
robnbill Posted April 9, 2017 #4 Posted April 9, 2017 I have found inlaying them slightly does several things, if fitting tightly to the base of the brackets, it looks great and second, it provides a tiny bit of more support overcoming the slight slop of the screw through the bracket, and lastly, it also allows you to add epoxy under the bracket attaching the bracket to the base. Canute, mtaylor and Eddie 3 Quote Bill Chantilly, VA Its not the size of the ship, but the bore of the cannon! Current Build: Scratch Build Brig Eagle Completed Build Log: USS Constitution - Mamoli Completed Build Gallery: USS Constitution - Mamoli
Lucius Molchany Posted April 9, 2017 Author #5 Posted April 9, 2017 Yes I checked it out and a 9/16th Forstner bitt should do the trick.I will go to Lowe's tomrrow and see if I can buy one. mtaylor, robnbill, Eddie and 1 other 4 Quote
mtaylor Posted April 9, 2017 #6 Posted April 9, 2017 Phil, Check online. You can then order (if in stock) and they'll pull it and have it waiting for you. However, if they're really busy it may take them several hours. But just check online first as it might save you a trip. Eddie and Canute 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Eddie Posted April 9, 2017 #7 Posted April 9, 2017 Hey howya goin Philo426, nicely done. Yes go with the inlay Canute 1 Quote I'm probably not going to live long enough to build all these but I'm BLOODY going to try HAHAHA. Future Builds: The Schooner Bluenose, scale 1:48, POF Scratch Build (Gene Bodnar practicum - Plans from modelshipbuilder.com) HMS Victory, scale 1:64 or 1:48, POF Scratch Build (John McKay's plans) Current Builds: 42ft Longboat Armed for War 1834, scale 1:36 POF Scratch Build (Plans from A.N.C.R.E.) Galley Washington 1776, scale 1:48, POF Scratch Build (NRG's Plans) Ragusian Carrack, scale 1:59, POB kit (MarisStella) King of the Mississippi, scale 1:80, POB Kit (Artesania Latina) HMS Snake 1797, 18 Gun Sloop of War, scale 1:64, POB Kit (Jotika/CalderCraft) Current Build: Stage Coach 1848, scale 1:10, Kit (Artesania Latina) Shhh don't tell the Admins I'm building this I'll hide it here ^under this line^ so they don't see it HAHAHA.
Lucius Molchany Posted April 9, 2017 Author #8 Posted April 9, 2017 Yes I went today because my wife wanted to go shopping and we needed a new propane cylinder for the grille.No Forstner bits came in 9/16 in the store but I did find an Irwin spade bit in the correct size.I will try it on a piece of scrap to see if it will work.If not I will order the bitt online and wait until it arrives. mtaylor and Canute 2 Quote
Eddie Posted April 9, 2017 #9 Posted April 9, 2017 Hey howya goin mate, if you got a drill press use that it will keep the spade bit straight. Canute and mtaylor 2 Quote I'm probably not going to live long enough to build all these but I'm BLOODY going to try HAHAHA. Future Builds: The Schooner Bluenose, scale 1:48, POF Scratch Build (Gene Bodnar practicum - Plans from modelshipbuilder.com) HMS Victory, scale 1:64 or 1:48, POF Scratch Build (John McKay's plans) Current Builds: 42ft Longboat Armed for War 1834, scale 1:36 POF Scratch Build (Plans from A.N.C.R.E.) Galley Washington 1776, scale 1:48, POF Scratch Build (NRG's Plans) Ragusian Carrack, scale 1:59, POB kit (MarisStella) King of the Mississippi, scale 1:80, POB Kit (Artesania Latina) HMS Snake 1797, 18 Gun Sloop of War, scale 1:64, POB Kit (Jotika/CalderCraft) Current Build: Stage Coach 1848, scale 1:10, Kit (Artesania Latina) Shhh don't tell the Admins I'm building this I'll hide it here ^under this line^ so they don't see it HAHAHA.
Lucius Molchany Posted April 9, 2017 Author #10 Posted April 9, 2017 Yes that is the best way but I dont have one! (Have to get to Harbor Freight and pick one up when they are on sale). ANYHOW,my drill has a buikt in level that will hopefully allow me to drill the hole perpendicular. mtaylor, Eddie and Canute 3 Quote
Lucius Molchany Posted April 9, 2017 Author #11 Posted April 9, 2017 Yes that is the best way but I dont have one! (Have to get to Harbor Freight and pick one up when they are on sale). ANYHOW,my drill has a buikt in level that will hopefully allow me to drill the hole perpendicular. Ok tried it on scrap and it should work just fine! Ryland Craze, Canute and Eddie 3 Quote
Eddie Posted April 10, 2017 #12 Posted April 10, 2017 Nice mate. Canute and mtaylor 2 Quote I'm probably not going to live long enough to build all these but I'm BLOODY going to try HAHAHA. Future Builds: The Schooner Bluenose, scale 1:48, POF Scratch Build (Gene Bodnar practicum - Plans from modelshipbuilder.com) HMS Victory, scale 1:64 or 1:48, POF Scratch Build (John McKay's plans) Current Builds: 42ft Longboat Armed for War 1834, scale 1:36 POF Scratch Build (Plans from A.N.C.R.E.) Galley Washington 1776, scale 1:48, POF Scratch Build (NRG's Plans) Ragusian Carrack, scale 1:59, POB kit (MarisStella) King of the Mississippi, scale 1:80, POB Kit (Artesania Latina) HMS Snake 1797, 18 Gun Sloop of War, scale 1:64, POB Kit (Jotika/CalderCraft) Current Build: Stage Coach 1848, scale 1:10, Kit (Artesania Latina) Shhh don't tell the Admins I'm building this I'll hide it here ^under this line^ so they don't see it HAHAHA.
Lucius Molchany Posted April 10, 2017 Author #13 Posted April 10, 2017 Yes!more stable too! mtaylor, Canute and Eddie 3 Quote
Lucius Molchany Posted April 10, 2017 Author #14 Posted April 10, 2017 Worked out well!now I have to sand,stain and seal the base board! mtaylor, Eddie, Ryland Craze and 2 others 5 Quote
Lucius Molchany Posted April 11, 2017 Author #15 Posted April 11, 2017 Stained it with Minwax Cherry and just laid down the first coat of Polyacrylic. usedtosail, Ryland Craze, Eddie and 1 other 4 Quote
Lucius Molchany Posted April 17, 2017 Author #16 Posted April 17, 2017 ...and got her mounted up after 4 coats of satin Polyacrylic.. Canute and mtaylor 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.