Valter64 Posted January 4, 2018 #1 Posted January 4, 2018 Hello, I would like to take part in this adventure, always fascinated by everything concerning Admiral Nelson, especially the vessels he commanded, the Vanguard, employed by Nelson in the battle of the Nile is one of those that most attract my attention .. Follow photos of the progress of construction. Good vision. Valter aviaamator and mtaylor 2 Quote
Valter64 Posted January 4, 2018 Author #2 Posted January 4, 2018 Keel and frames cut from a sheet of aeronautical birch plywood, 8 layers. Glue with Titebond and positioned lower deck. mtaylor, GrandpaPhil, Beef Wellington and 1 other 4 Quote
Beef Wellington Posted January 4, 2018 #3 Posted January 4, 2018 Nice clean start Valter, I'll pull up a first row seat and follow as this is a very nice kit. mtaylor 1 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop)
JohnReid Posted January 4, 2018 #4 Posted January 4, 2018 Great idea ! there are a lot of Victorys around including mine.If I had to do it over again I would love to do HMS St. Lawerence which was actually larger than the Victory and built at Royal Navy Dockyards Kingston Ontario Canada.It actually saved Canada during the war of 1812 as it was the largest ship on Lake Ontario where both sides knew whoever had the largest ship would win the war.After that the Americans turned their attention to the Atlantic.This battle was as important to Canada as Trafalgar was to the English but because Canada was under the control of the English at time it got little recognition. Good luck with your Vanguard.Cheers! John. Quote
AON Posted January 4, 2018 #5 Posted January 4, 2018 Looking forward to watching your progress mtaylor 1 Quote Alan O'Neill "only dead fish go with the flow" Ongoing Build (31 Dec 2013) - HMS BELLEROPHON (1786), POF scratch build, scale 1:64, 74 gun 3rd rate Man of War, Arrogant Class Member of the Model Shipwrights of Niagara, Niagara Region, Ontario, Canada (2016), and the Nautical Research Guild (since 2014) Associate member of the Nautical Research and Model Ship Society (2021) Offshore member of The Society of Model Shipwrights (2021)
Valter64 Posted January 4, 2018 Author #6 Posted January 4, 2018 Beams of the upper deck of the cannons glued in position and keyed with 1x1mm walnut Mirabell61, AON, GrandpaPhil and 1 other 4 Quote
Valter64 Posted January 4, 2018 Author #7 Posted January 4, 2018 Front bulkhead to be coated and decorated, with framework for service rooms (cacatoi) GrandpaPhil, mtaylor and AON 3 Quote
Valter64 Posted January 4, 2018 Author #8 Posted January 4, 2018 Stern, modified with respect to what was proposed by the Amati plans, inspired by Bellona mtaylor, GrandpaPhil and AON 3 Quote
Valter64 Posted January 4, 2018 Author #9 Posted January 4, 2018 Stern positioning tests is false keel GrandpaPhil, mtaylor and AON 3 Quote
Valter64 Posted January 4, 2018 Author #10 Posted January 4, 2018 Upper cannon deck made from 1mm aeronautical birch plywood zappto, AON, Mirabell61 and 2 others 5 Quote
AON Posted January 4, 2018 #11 Posted January 4, 2018 Holy moly! No time for the barnacles to attach to your bottom, eh? That is quick work. mtaylor 1 Quote Alan O'Neill "only dead fish go with the flow" Ongoing Build (31 Dec 2013) - HMS BELLEROPHON (1786), POF scratch build, scale 1:64, 74 gun 3rd rate Man of War, Arrogant Class Member of the Model Shipwrights of Niagara, Niagara Region, Ontario, Canada (2016), and the Nautical Research Guild (since 2014) Associate member of the Nautical Research and Model Ship Society (2021) Offshore member of The Society of Model Shipwrights (2021)
Valter64 Posted January 4, 2018 Author #12 Posted January 4, 2018 Stern positioning tests is false keel mtaylor, AON and GrandpaPhil 3 Quote
Valter64 Posted January 4, 2018 Author #13 Posted January 4, 2018 Tables made from strips of Tanganika 1x3mm, assuming the original board with a length of 20 feet at the table, the 1/72 scale imposes a length of about 84mm... GrandpaPhil, mtaylor and AON 3 Quote
Valter64 Posted January 4, 2018 Author #14 Posted January 4, 2018 Positioning of the deck on special mounting... AON and GrandpaPhil 2 Quote
Valter64 Posted January 4, 2018 Author #15 Posted January 4, 2018 (edited) 0.1mm polyester thread to simulate the caulking Edited January 4, 2018 by Valter64 mtaylor, GrandpaPhil and AON 3 Quote
Valter64 Posted January 4, 2018 Author #16 Posted January 4, 2018 (edited) First placed tables and "lived-in" simulation test... Edited January 4, 2018 by Valter64 GrandpaPhil, mtaylor and AON 3 Quote
Valter64 Posted January 4, 2018 Author #17 Posted January 4, 2018 Supply from the sawmill .... mtaylor, AON and GrandpaPhil 3 Quote
Valter64 Posted January 4, 2018 Author #18 Posted January 4, 2018 Deck advancement ... mtaylor, KeithAug, AON and 2 others 5 Quote
Valter64 Posted January 4, 2018 Author #19 Posted January 4, 2018 Hall deck completed mtaylor, AON, Tigersteve and 1 other 4 Quote
Tigersteve Posted January 5, 2018 #20 Posted January 5, 2018 Very nice work. Steve Quote Current: Mayflower- Model Shipways Completed: Lowell Grand Banks Dory- Model Shipways English Pinnace- Model Shipways 18th Century Longboat- Model Shipways
JohnReid Posted January 5, 2018 #22 Posted January 5, 2018 Love the deck work ! When I built my Victory I piled up a stack of planks and lightly glued a piece of black paper to the pile and then cut out each one with a razor blade.No glue marks were showing on the finished product.Cheers! John. Quote
Valter64 Posted January 5, 2018 Author #23 Posted January 5, 2018 Thanks for visit my wip John, tour model is very beautiful! I choose thread for caulking for realistic aspect, hope to reach a good result. 👍 mtaylor 1 Quote
Valter64 Posted January 5, 2018 Author #24 Posted January 5, 2018 Thanks for visit my wip John, tour model is very beautiful! I choose thread for caulking for realistic aspect, hope to reach a good result. 👍 Hal deck completed and apply Fusaggine for aged aspect GrandpaPhil and mtaylor 2 Quote
Valter64 Posted January 5, 2018 Author #25 Posted January 5, 2018 Ok, final aspect, now start with other side 👍 AON, GrandpaPhil and mtaylor 3 Quote
Valter64 Posted January 7, 2018 Author #26 Posted January 7, 2018 (edited) Ok, final aspect, now start with other side 👍 .... work on the deck continues ... Edited January 7, 2018 by Valter64 GrandpaPhil, mtaylor and Tim Curtis 3 Quote
JohnReid Posted January 7, 2018 #27 Posted January 7, 2018 Coming right along,Love it. Cheers John. Quote
Valter64 Posted January 28, 2018 Author #28 Posted January 28, 2018 Good morning Try positioning deck on the model and preparing upper deck and kitchen for cutting. Regards Valter GrandpaPhil, mtaylor and prutser 3 Quote
Valter64 Posted January 28, 2018 Author #29 Posted January 28, 2018 Good morning Try positioning deck on the model and preparing upper deck and kitchen for cutting. Regards Valter Try fit upper deck GrandpaPhil 1 Quote
Valter64 Posted February 1, 2018 Author #30 Posted February 1, 2018 Good morning Try positioning deck on the model and preparing upper deck and kitchen for cutting. Regards Valter Try fit upper deck mtaylor 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.