Sandor Laza Posted April 18, 2020 #1 Posted April 18, 2020 I have a ropewalk and I can make two or three thread ropes that look realistic. If I want to make a thicker rope, I tried to make a three threaded rope from the two threaded ropes I made, but they don't look realistic, the original threads are too prominent. Shall I try to buy thicker threads to start with? Or is there a trick to make thicker ropes? EricWilliamMarshall 1
Gregory Posted May 22, 2020 #2 Posted May 22, 2020 What does your rope walk look like? There are different styles out there.. Mine is somewhat traditional but limited by the length of my workbench.. I can only make about 40 inches of rope at a time. The size of the rope is determined by the number of threads I use on each of the whorls. I have made rope with up to 8 threads on each of the 4 whorls, for a total of 24 threads. Bob Cleek, EricWilliamMarshall, mtaylor and 2 others 5 “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon
Jaager Posted May 22, 2020 #3 Posted May 22, 2020 Linen yarn comes in a wide range of diameters. Search the site for posts listing sources. Yours is the continent where it is produced. mtaylor 1 NRG member 50 years Current: NMS HMS Ajax 1767 - 74-gun 3rd rate - 1:192 POF exploration - works but too intense -no margin for error HMS Centurion 1732 - 60-gun 4th rate - POF Navall Timber framing HMS Beagle 1831 refiit 10-gun brig with a small mizzen - POF Navall (ish) Timber framing The U.S. Ex. Ex. 1838-1842 Flying Fish 1838 pilot schooner - POF framed - ready for stern timbers Porpose II 1836 brigantine/brig - POF framed - ready for hawse and stern timbers Vincennes 1825 Sloop-of-War - POF timbers assembled, need shaping Peacock 1828 Sloop-of -War - POF timbers ready for assembly Sea Gull 1838 pilot schooner - POF timbers ready for assembly Relief 1835 packet hull USN ship - POF timbers ready for assembly Other Portsmouth 1843 Sloop-of-War - POF timbers ready for assembly Le Commerce de Marseilles 1788 118 cannons - POF framed La Renommee 1744 Frigate - POF framed - ready for hawse and stern timbers
Bob Cleek Posted May 22, 2020 #4 Posted May 22, 2020 The thicker the thread, the thicker the rope. The easiest is to buy heavier thread for your layup. You can also double or triple the number of threads you attach to each hook. Just make sure the tension of the multiple thread strands is equal on each hook. If you read this section on ropemaking, you will find charts of formulae, recipes, if you will, for making different thicknesses of rope. mtaylor and EricWilliamMarshall 2
Bob Cleek Posted May 22, 2020 #5 Posted May 22, 2020 27 minutes ago, Gregory said: Mine is somewhat traditional but limited by the length of my workbench.. I can only make about 40 inches of rope at a time. You need a bigger workbench! Or not. Get two tables the same height and spread them as far apart as you want. You can also simply clamp a plank longer than your workbench to its top and put your ropewalk ends at either end of the plank. Or am I missing something here? mtaylor, aviaamator, EricWilliamMarshall and 1 other 4
Recommended Posts