allanyed Posted June 14, 2021 #1 Posted June 14, 2021 I have been following Druxey's build log on the 28 foot American cutter (which a fantastic log with lots of details) and he shows a faux burl finish on what will be the display base board for the model. He recommended a specific book which I will likely get, but I found the following website video that gives step by step instructions on creating a burl finish on a plain piece of wood. Nothing exotic or expensive is needed. https://www.google.com/search?q=How+to+make+Faux+burl+finish+on+plywood&oq=How+to+make+Faux+burl+finish+on+plywood&aqs=edge..69i57.7636j0j1&sourceid=chrome&ie=UTF-8#kpvalbx=_LT3HYOiwI_CD_Qbap5HoCg15 Allan mtaylor, thibaultron, cotrecerf and 5 others 5 3 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
druxey Posted June 16, 2021 #2 Posted June 16, 2021 Nice demo of this particular finish technique. As I only had a small area to do, I used artists' oil paint and thinners instead of stains. Otherwise I just used smaller brushes. michael mott, mtaylor, TomShipModel and 3 others 6 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
TomShipModel Posted June 17, 2021 #3 Posted June 17, 2021 Very good demo. Thanks. thibaultron, mtaylor and Canute 3 Quote Tom Ruggiero Director Nautical Research Guild Member Ship Model Society of New Jersey (Past President)
Gregory Posted June 17, 2021 #4 Posted June 17, 2021 On 6/14/2021 at 7:51 AM, allanyed said: but I found the following website video that gives step by step instructions on creating a burl finish on a plain piece of wood. Do you have a specific video in mind? Your link takes me to a page with several. mtaylor, Canute and thibaultron 3 Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon
allanyed Posted June 17, 2021 Author #5 Posted June 17, 2021 When I cut and paste the site in the post it comes right up on top and then just click on the arrow in the middle. Hope this helps. Canute, thibaultron and mtaylor 3 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
Gregory Posted June 17, 2021 #6 Posted June 17, 2021 The video at the top of your link is " How to faux burl wood-Artisan Rooms " Is that the one. If not, do you think you could click on the video , then paste the link here? mtaylor, Canute and thibaultron 3 Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.