Friedrich Wilhelm zu Pferde by Lee J H - Euromodel - 1:48

[Lee J H]

When trying to install a bollard, the ribs interfered, so they were cut in the middle and installed.

 

The capstan used kit components.

[Lee J H]

I was going to do planking work on the main deck, but I had to work on the bow section first, so I went to the bow side.

[Lee J H]

It is necessary to attach the keel.
So, I ground the front part to about 8 mm.

[Lee J H]

Thin-slung bamboo was used to reinforce the keel 

[Lee J H]

 According to the manufacturing machine provided by the company, the bent part of the wiring wire is supposed to be worked on later.
I'm trying to get connected and working.

 

 

 I don't know the name of this part, but according to the drawings, it is marked with a slight curve, so I try to bend it with an iron after soaking it in water.
It's not thick, so it warps easily.

 

You need to cut it out by marking where the door is and where the window is.

 

 It was flanked with 1 mm thick walnut wood, and pear wood was used for the window rimming. 

After this preparation, we plan to work on the details later.. 

 

By the way, the ribs in this kit look like they have a lot of places to mend them. I need to clean up my ribs. There are a lot of steps.

 

 

[Lee J H]

It's been a long time since I made it.

I've been working on the forward deck of the ship.

[Lee J H]

[Lee J H]

Nailed it!

[BETAQDAVE]

On 3/4/2023 at 6:14 AM, Lee J H said:

Please excuse me for not being familiar with English while writing the production log.

Not a problem here.  I've known plenty of "English" speaking people here in the U.S. who have yet to master it. 

[Lee J H]

On 5/6/2024 at 1:53 AM, BETAQDAVE said:

Not a problem here.  I've known plenty of "English" speaking people here in the U.S. who have yet to master it. 

Thank you for your understanding. Have a nice day

[Ronald-V]

What a lovely build so far!  

[Lee J H]

16 hours ago, mugje said:

What a lovely build so far!  

Thank you for your support.
It's something you have to proceed with as you decide on the stage of production. I'm struggling with my lack of experience.
I'm planning to work hard on it.

[Lee J H]

On 5/9/2024 at 3:36 PM, Lee J H said:

Thank you for your support.
It's something you have to proceed with as you decide on the stage of production. I'm struggling with my lack of experience.
I'm planning to work hard on it.

 

[Lee J H]

The studio was so hot that I couldn't work on it for months.
It's winter now, so I started again.

The 1st planks of the main deck.

 

 

[Lee J H]

I've planked the inside with the right size of wood.

 

[Lee J H]

[Lee J H]

As I'm trying to do the main deck, I think I need to complete the bottom 2nd planks to work on the battery, so I'm going to do the stern planks.

 

[Lee J H]

Now, we're going to start the second planking at the bottom.

[Lee J H]

I did the second planking of work on the bottom.
We worked by replacing the 6mm material enclosed in the box with 5mm material.

[Baker]

Nice planking 

[Lee J H]

The political situation in Korea is not good these days. I think it has been widely reported overseas through foreign media.

I hope that politics will stabilize soon.

 

I made the main deck gate frame. Since it is difficult to do it according to the drawing dimensions, the actual size is different,

so I made a compromise with the lower gate frame and the drawing and marked it with a pencil.

[Lee J H]

During the production process, there was a difference between the drawing and the actual product, so the ribs had to be cut. Fortunately, it is hidden under the deck.

[Lee J H]

In this way, the location of the gate frame was finally cut off.

[Lee J H]

The wood was manufactured and positioned with a thickness of 1.5 mm.

 

Now I plan to make the outer planking and whale.