CapnJack43 Posted June 5 Author #33 Posted June 5 Making a stairway for the forecastle put together a jig with the dremel drill press Dave_E 1 Quote
CapnJack43 Posted June 5 Author #35 Posted June 5 Stairs are installed time to work on chainplates CiscoH, JacquesCousteau, Kenneth Powell and 1 other 4 Quote
Knocklouder Posted June 5 #36 Posted June 5 Very impressive, amazing work and details, nice work. Dave_E 1 Quote Start so you can Finish !! Finished: The Sea of Galilee Boat-Scott Miller-1:20 , Amati } Hannah Ship in a Bottle:Santa Maria : LA Pinta : La Nana : The Mayflower : Viking Ship Drakkar The King Of the Mississippi Artesania Latina 1:80 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models
CapnJack43 Posted June 22 Author #37 Posted June 22 Didn't like the bread and butter longboat that came with the kit so I decided to order a longboat from model expo. Kit came in a plastic bag with no photo and a single sheet of printed instructions and the photos on the sheet were so dark that I could not figure out what they were trying to show. Found some links on this site from other builders that helped clear things up. Kenneth Powell, Dave_E and JacquesCousteau 3 Quote
CapnJack43 Posted June 22 Author #38 Posted June 22 Chainplates with deadeyes are done - made another jig with an alligator clip to hold them level while gluing them to the hull. Chain did not come with the kit - bought some chain in Walmart and secured to the hull with pins. Dave_E and JacquesCousteau 2 Quote
CapnJack43 Posted June 22 Author #39 Posted June 22 Bow rail did not line up after gluing it together. Used a piece of strip wood and alligator clips to get the proper spread. Dave_E 1 Quote
CapnJack43 Posted June 22 Author #40 Posted June 22 Fore and aft deck rails are done getting ready to work on the bow rails and dreading it. Kenneth Powell, JacquesCousteau, ERS Rich and 1 other 4 Quote
CapnJack43 Posted July 3 Author #41 Posted July 3 Bow rails are completed thanks to Kenneth Powell for the great photos in his build log. Made the grating out of 1/32x1/32nd strip wood. Using my home made jig for attaching the rails to the bow makes up for my shaky hands. Quote
CapnJack43 Posted July 3 Author #42 Posted July 3 Made a needle out of a piece of brass rod by hammering the end to flatten in and then drill a small hold to insert the anchor line. Dave_E 1 Quote
CapnJack43 Posted July 3 Author #43 Posted July 3 Had some leftover rail posts from my Danmark Build - used them with some leftover brass rod to make the side rails. Knocklouder, Dave_E, ccoyle and 2 others 5 Quote
CapnJack43 Posted November 23 Author #45 Posted November 23 Been a while since I posted made some progress but lots of other things happening as usual. Used drill press and dremel to shape the yards. Quote
CapnJack43 Posted November 23 Author #49 Posted November 23 Soldered up wire jigs to get proper spacing between deadeyes Quote
CapnJack43 Posted November 23 Author #51 Posted November 23 Found this great pic of deadeye rigging and added step numbers in red. Quote
CapnJack43 Posted November 23 Author #53 Posted November 23 White card stock placed behind the shrouds makes tying the clove hitches for the ratlines easier to see. Hope to get going on the remaining ratlines soon. Kenneth Powell, Dave_E and Gregory 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.