Friesland 1663 by mrcc - Mamoli MV24 - 1:75

[mrcc]

More progress on hull planking...

 

I am pleased enough with how things turned out. Need to do some fill and sand now but first will focus on the exterior hull planking about the main gun deck.

[mrcc]

Also... here is how I left the switch for my LED lighting setup for the time being. Easy to access as the deck in this area is relatively unpopulated with "stuff"... plus the grating will hide the switch while still providing access to the button battery for change as required.

[mrcc]

Just working on the fore and aft bulwarks now... got a little bit done on my 2 hour lunch break today.

 

Also, did some significant plank bending with a relatively new tool and it works very well!

[mrcc]

Long time since posting an update as was working on another kit... now finished.

 

One of the disappointments with this old vintage kit was the gratings, they are extremely brittle and fragile as you can see in the picture below.

 

I could not live with the result and as such ordered a number of grating packages from Jotika/Caldercraft (made from beechwood).

 

Happy with the result... I cut a recess in the outer margins in the underside perimeter of the grating with my Proxxon saw, also creating a nice margin on the deck,  and was lucky enough to have a nice tight friction fit to hide the LED light switch.

[mrcc]

This is the grating kits from Jotika/Caldercraft.

 

I am missing some laths from 2 of the 6 packages I ordered and have an email out to Jotika for a replacement package.

[amateur]

Friesland is a nice model.

Don’t believe the hostorical info given by Mamoli. It is correct as far as dates and places of the battles are concerned. Not with respect to the ship. The model is based on drawings and photographs published in a (at least on this side of the pool) famous german book ‘Hollandische Zweidecker’ by Heinrich Winter.

The book shows a contemporaneous model of a (presumably fictitious) Dutch ship that ended its long life in bombing of Berlin in 1944/45.

 

The book is still available second hand, and many of the pictures can be found online. Nice when you want to do some detailing.

 

Jan

[mrcc]

Thanks Jan for all the information!

[mrcc]

The Mamoli plans do not call for this step in the instructions but thought I would add this detail should anyone wish to peek through the gunports.

 

The edge of the bulwark is a simple strip of 5 mm with lines drawn through them (to simulate ends of the sides) and the side strips are regular strips that are 5 mm in width.

[mrcc]

Started to work on the deck fittings... per the plans.

 

Happy with my cuts on the bitts... used the table saw to cut slits in 3 passes half way through the material to 5 mm width in the uprights to accommodate the horizontal bit.  Used the saw at an angle of 40 degrees and ever so slightly scored the tops of the bits on all 4 sides of the end and fine tuned with a file for a satisfactory result.

 

The capstan is as pictured and easy enough to figure out but absolutely no guidance in the instruction manual. The instructions only say "glue to the deck". Not sure if I should research a color scheme that is period specific and may do some research on this tonight.

[mrcc]

Lastly, spent a few hours this past weekend in sanding the hull, and it is now pretty close to being ready for the second (finish) planking layer.

 

I added some fill at the bow and even less at the stern, but through the majority of the hull, added 0.5 mm to 1.0 mm  strips to fill slight hollows (especially on the margins of the gun ports) and then sanded back to flush, and though it make not look great, this hull is very nice and smooth (at this time).

[Baker]

7 hours ago, mrcc said:

Not sure if I should research a color scheme that is period specific

https://modelshipworld.com/topic/14188-golden-hind-ex-pelican-by-baker-finished-scale-145-galleon-late-16th-century/page/11/#elControls_625821_menu

 

Nice work 👍

 

[mrcc]

Thanks Patrick for your reply… went through your linked build log of your Golden Hind and found lots and lots of great information. 
 

Cheers!

[mrcc]

Got some work done on the Friesland this past weekend.

 

Every step requires double checking and shimming where necessary. These vintage kits (pre laser cut) require lots of double checking as nothing is ideal with regards to fitment and further with regards to level and square. The bulkhead frames in the kit were not ideal and thus the builder always has to be thinking about future steps and how things will look.  I leveled the hull and then worked forward in terms of shimming the deck support beams in order to make sure they are all level relevant to the hull and each other as evident in the pictures below.

[mrcc]

Then of course, getting the cannons built and placed before the upper decks are fixed down. The carriages are glued down first on to the deck and later are the cannons placed through the port onto the carriage for display purposes.

 

Much talk in the other Friesland build logs about the length of the dummy cannons that are to be placed in the deck below the main deck. Some kits of a particular era  had cannons that were way out of scale with regards to length and... alas, I have one of those kits that are at least 5-7 mm too long compared to the cannons on the deck above.

[mrcc]

Should have provided a picture of the built gun carriages.

 

The second picture roughly portrays the difference in the cannon extension from the port referencing the top cannon to be placed inboard and recessed a bit on its carriage and the bottom picture, referencing the dummy cannon and its placement in the lower row of gun ports.

[mrcc]

More details done this week... I sanded down the wheels on the gun carriages in order to get a firm contact for gluing the carriages down prior to them getting hidden from the deck above. I have to now varnish the deck and put the beams in in order to lay down the upper decks... going to use wipe on poly.

 

All fun so far!