henryjames Posted January 15, 2014 Share #1 Posted January 15, 2014 And so my first ever build and build log, (pics to follow shortly!) Open opening the box, it's surprising how flat pack evrything is! although teh quality looks great, ot sof very small metal components and the wood look decent quality. Instructions are in Italian, which for a moment threw me, untill I found the corresponding English translation sheet. In fact instructions are great, lots of diagrams and lots of step by step instructions. The kit comes with a hammer, sanding block, vice, tweezers, and a detailed sanding pen tool, and I have to say teh quality is surprisingly good. For a first timer like me, this is superb. One thing that has struck me is the cloth sail material provided. It has stitch lines printed on, which, though useful, I think will look a bit rubbish on the model. Is this normal, or is it normal to just use this fabric as a guide and go out and buy some other blank linen type fabric? I'm jumping teh gun here as the sails are pretty much one of the last steps but thought I'd ask! First task is sanding and shaping the boom..... Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
Blademaster2444 Posted January 15, 2014 Share #2 Posted January 15, 2014 I wish my kit came with some tools Quote Link to comment Share on other sites More sharing options...
Bugra Posted January 15, 2014 Share #3 Posted January 15, 2014 Have fun with your first build. Waiting to see photographs. And the sails. I don't have too much idea on Kits but with photos someone may have..Cheers, Bug. Quote There is nothing that a little sanding can't solve.. Bugra. Current Builds : H.M.S. Triton Cross Section by Bugra - 1/48 Turkish Traditional Ship - Surmene Takasi by Bugra - 1:35 Link to comment Share on other sites More sharing options...
The Sailor Posted January 15, 2014 Share #4 Posted January 15, 2014 Looking forward seeing the first pictures. Quote Cheers, Richard. ------------------------------Current build: Mercury, Russian brig, America's Cup Yacht Endeavour (1934), AmatiCompleted build: HM Schooner Pickle, JoTiKaNext: Link to comment Share on other sites More sharing options...
Loblolly Posted January 19, 2014 Share #5 Posted January 19, 2014 Thinking of this as my next build so really keen to see how it progresses. Andy Quote Link to comment Share on other sites More sharing options...
Q A's Revenge Posted January 19, 2014 Share #6 Posted January 19, 2014 Me too. It's between this and the St. Roch! Looking forward to seeing some pictures! Quote Link to comment Share on other sites More sharing options...
henryjames Posted January 20, 2014 Author Share #7 Posted January 20, 2014 Apologies land lubbers, I have been tardy on my picture uploads, I will upload some tonight. I have now sanded and shaped the boom and attached the various metal gear that is attached in addition to constructing the main boom pivot. After this was making the mast, its pretty long and constructed of various semi circle dowel lengths and has a 1mm slot running the full length. The mast is also not circular its in fact a squashed circle making sanding quite a task, to create a smooth tapered length. however I'm super pleased with the results and its surprising strong, yet flexible. SO far so good, no issues to report yet, instructions are very detailed and as this is my first build fairly straightforward to follow! Q A's Revenge 1 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted January 24, 2014 Author Share #8 Posted January 24, 2014 there we go pics at last! the boom is now complete, tapered and with all metalwork and the mast is too, tapered and covered in a metal! next up is painting, apparently I need a matt white enamel for both and tips on where to get this paint? I'm guessing I want a spray not to brush? after this its onto teh good stuff the actual hull! Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted January 27, 2014 Author Share #9 Posted January 27, 2014 at last, figured out how to work this infernal upload tool! Alfons 1 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted January 28, 2014 Author Share #10 Posted January 28, 2014 Update number 2, boom done, mast done, The kit comes with a rather handy ship mount which is pretty useful onto the hull, central hull line support glued ensuring its super straight (apologies the name escapes me!) horizontal spacers now all glued in, the curvature of the hull is quite extreem in some places, so planking looks like it will be quite a task! next step is to sort the bow and stern blocks, and sand them like crazy! I have to paint the mast and boom with 'matt white enamel' paint, does anyone have any recomendations on where to get this from? In addition anyone any clue what colour to paint the top half of teh hull (I'm jumpng the gun here but thought I'd get a jump start! also the provided sails are printed on, does anyone have any thoughts on these (is it better to buy new blank linen/cloth and make new ones?) yvesvidal, The Sailor and Sidfisher 3 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted February 3, 2014 Author Share #11 Posted February 3, 2014 well, arn't we all very chatty... Here's my next photo batch, you can see the sanded bow and stern blocks and all the spacers are now sanded at an angle to ensure planking bonds well. The faux deck is glued on, and the provided stand has been constructed, up next planking! I won't bother uploading many more posts as it seems very few people are following this one, unless I'm proved otherwise yvesvidal, Alfons, LMDAVE and 2 others 5 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
Q A's Revenge Posted February 3, 2014 Share #12 Posted February 3, 2014 Looking good. Humbrol have Matt White paint I think? Tamiya list a Matt white in rattle cans as well. Quote Link to comment Share on other sites More sharing options...
The Sailor Posted February 3, 2014 Share #13 Posted February 3, 2014 Very good start. You can use every type of colour you want even spray colour from your local building centre. Quote Cheers, Richard. ------------------------------Current build: Mercury, Russian brig, America's Cup Yacht Endeavour (1934), AmatiCompleted build: HM Schooner Pickle, JoTiKaNext: Link to comment Share on other sites More sharing options...
henryjames Posted February 5, 2014 Author Share #14 Posted February 5, 2014 sorted the paint through cornwall model shop planking here we come, am planning on using a med viscosity CA glue, as using wood glue and nails seems like a real pain and likely woudl take ages, I have found a good thread here: http://shipmodeling.net/photopost/showgallery.php?cat=668&ppuser= about using CA glue for planking then just squirting in some wood glue into the cavity before sealing up the plank. I plan on starting at the deck line and working my way down, luckily the curvature of the hull isn;t too crazy so bending shoudl be straightforward ish any tips before I dive in!? Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted February 24, 2014 Author Share #15 Posted February 24, 2014 clearly not....! Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
malmoerik Posted February 27, 2014 Share #16 Posted February 27, 2014 Hi Henry. When I built it I found the curvature very tricky. I'm now building a similar yacht and still haven't figured how to really do it. Do post a lot of photos so that we can see how you progress. Anyways, what I did on my second build was to temporarily place 4 planks at equal distances without bending them, to get a feeling for what I was aiming for. If you just start at deck-line and work your way down you may run into some extreme (haha) tapering... By the way, when I taper a plank a squeeze it between to wooden blocks, letting the part I want to remove stick up. Then it's easy to cut it and sand it and you get an even cut. I'll post a picture on my Britannia log. Erik Quote Link to comment Share on other sites More sharing options...
LMDAVE Posted June 1, 2014 Share #17 Posted June 1, 2014 HI Henry, sorry you weren't getting much answers to your questions. I would like to see the progress of your build, this is the exact scale model of the Endeavour that I'm about to dive in to. I suppose you already did your planking. This will be my second wooden plank-on-frame build. But, from planking with CA glue using an accelerator spray is like magic, only problem with CA glue is glue bleeding into the wood and shows up with you're planning a natural or stained finish. I plan to leave the bottom hull unpainted, so I will be extra careful on the second planking at the bottom below the water line. Quote San Francisco II by Artesania Latina - Scale 1:90 https://modelshipworld.com/topic/11489-san-francisco-ii-by-lmdave29-artesania-latina-scale-190/ 1/80 J Class Endeavour Yacht http://modelshipworld.com/index.php?/topic/7058-endeavour-j-class-yacht-by-lmdave-amati-180/ 1/64 MS BLUENOSE http://modelshipworld.com/index.php?/topic/90-bluenose-by-lmdave-ms-164/ Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #18 Posted August 31, 2014 Right, so like buses you wait for a post and two come along. teh build went on hold for a while as it was summer, etc, but now its full steam ahead, finished teh first planking, then jumped straight onto the second Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #19 Posted August 31, 2014 GuntherMT and jdbradford 2 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #20 Posted August 31, 2014 Then came the second planking, all went well, but that walnut at 0.5mm is very fragile, Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #21 Posted August 31, 2014 jdbradford and GuntherMT 2 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #22 Posted August 31, 2014 following this, was planking the deck, unlike LMDAVE I went old scholl and kept it all one colour, quite tricky to do actually and super time consuming, as each plank neede individually holding, pretty much by hand using the aliphatic to make sure there were no unsightly gaps. Pleased with the result, and even better, no need for wood filler! Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #23 Posted August 31, 2014 justsayrow, GuntherMT, jdbradford and 1 other 4 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #24 Posted August 31, 2014 I also predrilled all hole with deck furniture as advised in teh instructions, hence the holes! justsayrow 1 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #25 Posted August 31, 2014 I didn;t have the right primer and paint, so made the deck furniture too: Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #26 Posted August 31, 2014 jdbradford 1 Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #27 Posted August 31, 2014 fiddly little chaps, with acrylic windows too! went with a walnut wash so it matches the hull, was going to paint the'seting area' red or aomething to make it look like cushions, but actually, might just leave it wood, thoughts?? Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
henryjames Posted August 31, 2014 Author Share #28 Posted August 31, 2014 next steps are to mask the hull, prime it and paint half blue and leave half pure walnut, with a gloss polycoat, also, will probably paint the deck a gloss too? thoughts on this? looking to get me some Frog tape to stop and nasty bleed, and have maanged to get some 0.5mm trimline for the waterline, wondering if I use this as a 'mask' or instead just actually use this teh line itself and just varnish over the top?? Quote Previous builds - Ummm does Airfix count??? Current build - Amati Endevour 1:80 Link to comment Share on other sites More sharing options...
jdbradford Posted August 31, 2014 Share #29 Posted August 31, 2014 Hey Henry, just found your build. Dave, Floyd and I are all working on this model, Floyd's is 1:35 I think. I will look at your pics now as I am trying to finish up the deck furniture and start rigging here shortly. Jeff Quote Current Build: Model Shipways MS2015 - Fair American Kit bash Previous Build: J-Class Endeavor Link to comment Share on other sites More sharing options...
jdbradford Posted August 31, 2014 Share #30 Posted August 31, 2014 I did almost the exact same on my build. I did stain the two center deck planks, but the stain bled under the tape. I should have primed it. Also, my mahogany 2nd hull planking did not turn out as well as I would have liked. Near the widest part of the hull, the planks wanted to bend and rise up on one side. I clearly had not faired the bulk-heads correctly. After some filler, sanding, priming and re-staining, the build looked a bit better. I masked off the deck and bottom of the hull and painted a really cool blue. After a few coats, I applied a white water line stripe (1/8" wide at O'Reilly Auto parts) and then sealed the whole hull. I was so frustrated building the deck-house. The instructions are out of order and I wish I had read more of the other's build first. Trying to place the acetate after gluing up the deck-house is wrong, and then trying to keep the brass window covers in place was initially a nightmare. I dread trying to put windows in the deck portholes. LOL I am now working on stropping blocks. After reading online and seeing many pictures, I think I finally figured it out. Jeff henryjames 1 Quote Current Build: Model Shipways MS2015 - Fair American Kit bash Previous Build: J-Class Endeavor Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.