Jump to content

Recommended Posts

Posted

I have just bought a pair of these and wondered if anyone out there has experience of them.

 

post-228-0-72519500-1402330923_thumb.jpg

 

They come from the jewellery making world and are termed loop making pliers and are quite well made.

the "jaws" will produce loops of 1.8/2.7/3.5/5.0/7.0/8.5 mm .

 

post-228-0-25628500-1402331451_thumb.jpg

 

post-228-0-92596900-1402331498_thumb.jpg

 

post-228-0-58230200-1402331530_thumb.jpg

 

It is likely that the larger jaws will be of limited use but I found making the loop shown to be very quick and easy to form as the plier grips the work as well as forming the shape.

 

Mike.

 

 

Previous Build: LA gun deck cross section.
Previous Build: Lancia Armata. Panart 1:16
Previous Build: HMS Pickle. Jotika Build.

HMS Triton cross section 1:32.

Shelved awaiting improved skills:

Chuck"s Cheerful.

Current build.

Tender Avos.

HM cutter Alert.

 

 

:

Posted

Wish they would do them down to 0.3 mm diameter or so … difficult to modify existing pliers in that way.

 

wefalck

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Posted

Wefalk,

 

That would be a very , very thin plier jaw! I doubt it would be viable. I am afraid it is back to 0.3mm drill in the vice me lad!

 

Mike.

Previous Build: LA gun deck cross section.
Previous Build: Lancia Armata. Panart 1:16
Previous Build: HMS Pickle. Jotika Build.

HMS Triton cross section 1:32.

Shelved awaiting improved skills:

Chuck"s Cheerful.

Current build.

Tender Avos.

HM cutter Alert.

 

 

:

Posted (edited)

The pliers I use for making eyebolts, etc. are fairly inexpensive but a very good quality tool.  The tips are 0.042 in diameter at the tip.  An eye/ring of almost any size from 0.042 in. dia. up to 0.188 in dia. can be made.  I make a mark on the tapered barrel to mark the spot to wrap the wire when I want to make a bunch the same diameter.  These are also useful for making hooks with an eye - all with the same tool - no need to swap out tools or use a drill bit for the eye and then the pliers for the rest.  I got this at Hobby Lobby and it's from their Beadsmith brand.

Kurt

post-177-0-30417900-1402690863_thumb.jpg

Edited by kurtvd19

Kurt Van Dahm

Director

NAUTICAL RESEARCH GUILD

www.thenrg.org

SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS

CLUBS

Nautical Research & Model Ship Society of Chicago

Midwest Model Shipwrights

North Shore Deadeyes

The Society of Model Shipwrights

Butch O'Hare - IPMS

Posted

One can get even finer ended needle-nose pliers (jewelers' supply houses), but the best Swedish ones are quite pricey at around US$50.00. However, they perform beautifully. Just don't drop them accidentally on to concrete as I once did!

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Posted

I have a very similar pair of these pliers. Micro Mark sells them. I find I use many of the different sizes to get a constant curve as well as making eyes.

Current Builds - 18th Century Longboat, MS Syren

Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18

On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, 

 

Its a sailor's Life for me! :10_1_10:

Posted

Those small needle nose pliers would be handy for adjusting things like hooks and clevis to get the proper shaps and turn-backs on hooks for mousing, after the initial forming. My experience with pliers is that I loose the use of one hand while the pliers are in my hand so use the vice often to hold items when using pliers.

jud

Posted

Vic,

 

They were purchased through Amazon UK listed as "6 step multi size wire looping jewellery pliers".

 

Mike.

Previous Build: LA gun deck cross section.
Previous Build: Lancia Armata. Panart 1:16
Previous Build: HMS Pickle. Jotika Build.

HMS Triton cross section 1:32.

Shelved awaiting improved skills:

Chuck"s Cheerful.

Current build.

Tender Avos.

HM cutter Alert.

 

 

:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...