Jump to content

City of Monroe by chborgm – FINISHED - Scale ¼” to foot - Western River Steamboat


Recommended Posts

 I have three river boats from kits, but this is my first attempt at a scratch build.Have just started so have nothing to show but a couple sheets of plans. Will add them in next post, but have to first reduce the size so they can be posted.

 

Plans by J. F Hale 1974

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

I did some quick research and she's a fine-looking boat. I'm looking forward to this. How did you choose this one in particular?

Link to comment
Share on other sites

Oh, that's interesting, I thought you were building this one (a sidewheeler). It's the only City of Monroe listed in Way's Packet Directory. Do the plans give any information about their prototype?

Link to comment
Share on other sites

I wonder if the Fryant plans are for one of the three "Monroe"s known to be built? One was a centerwheel ferry, one was a sidewheeler, but the third was a sternwheeler that operated on the Ouchita River, built in 1886. The photo in that link looks pretty similar to your plans.

Link to comment
Share on other sites

John Fryant's plans are of the same boat you are building.    See: http://www.steamboats.org/modelplans/p2-city-of-monroe.html

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

I would love to build the sidewheeler you first referenced, but I haven't seen an plans for one similar to it.

I picked this one out of the "Fryant" plans about six months ago mainly from it's appearance.

The plans are 1/8 to ft, but I am going to build it 1/4. I have a slight problem with my right hand that has got worse with age so I felt the larger scale would be a little easier, and give an opportunity for a little more detail. Since I have put lights in the last three I built I am planning to do the same here.

 

Glad you will follow along you have given a lot of insight to these boats that really added to the hobby.

 

Clarence

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

From Bob's link:
 

 

A fictional boat, but typical of sternwheel cotton carriers operated on the Lower Mississippi and it's tributaries

 

 

That explains the discrepancy. This will be a neat project regardless, and I'm looking forward to it.

Link to comment
Share on other sites

Cathead

 

From the artical of the boats that operated on the Ouchita River, I think this is that "City of Monroe". Now the plans call for coal bins, but you would think that boats in this area would be wood burning. What do you think? 

​also do you know what the Life Flots would look like. I am so glad you added an index to the log on the Bertrand I have already refered to it several times

 

Clarence

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

Clarence, for whatever it's worth, that article lists the boat solely as the "Monroe" (not "City of"), and Way's Packet Directory also lists the "Monroe" as being a sternwheeler that operated on the Ouchita late in its life. Although, just to throw a little more fog into the mix, that online article claims that Ouchita-operating Monroe was built in Pittsburg (sic) while the Way's Monroe is listed as built in Wheeling. I think I'd trust the latter over the online article which may or may not know what it's talking about. I certainly don't think it affects your model's interest in any way, it'll be a really neat build no matter what. Given that Fryant himself lists his plans as being for a fictional boat, I'm not sure it's worth trying to tie them too strongly to any given prototype.

 

As for the fuel, the Monroe in Way's was built 1886 and sank 1915, and certainly by the later end of that period I wouldn't be surprised if it had been converted to coal even if originally built for wood. Wood became a dear commodity along the rivers as the regions were deforested due to high demand, and coal was much more energy-dense (same reason railroads converted over).

 

I don't think I can help you much on the small boats. My understanding was that most steamboats in the core riverboat era didn't carry "lifeboats" in the marine sense of the word, just a couple small yawls for general-purpose use. There was no direct provision for passenger safety. I don't know when/if that changed; I could see different practices developing as the 20th century got underway. I suspect Kurt or Captain Bob would know more.

Link to comment
Share on other sites

I was just looking at the plans and the above question came to me. It is marked Coal in one place and life Flots in another. I realize they are fictional plans and will be more fictional when I get finished. I like the look of wood stacks so I am sure I will add them. 

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

  • 3 weeks later...

I haven't been keeping the log up to date, so let me try now. I have the hull ready for planking. When I decided to build this at 1/4 to foot I didn't stop and think how big that would be. Roughly 50 inchs without landing platforms. This will be a good place to use all the material left from other builds. 

 

 

post-14839-0-33482200-1479756405_thumb.jpg
post-14839-0-45620800-1479756429_thumb.jpg
post-14839-0-44682600-1479756450_thumb.jpg

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

FYI

Howard shipyards in Indiana built a side wheeler City of Monroe in 1897 was burned and damage by a tornado 1899 rebuilt as Hill City, converted to Corwin H Spencer and burned 1905. A lot of Howard Steamboat Company information is at Indiana.edu/lilly library. You can write or call and get copies of information on the craft you need. There is over 200,00 pieces of information about the company and what they did..

Lee

Link to comment
Share on other sites

She's a big beast, all right! Thanks for the update, I was wondering how you were coming along. Nice progress. What kind of wood are you using?

Link to comment
Share on other sites

I am using wood left from previous builds. The frames are 1/8 inch plywood, and boxwood. The deck is balsa. This was a mistake and will never use it again because of how fragile it is. I am not sure of the woodstrip I will use for planking. It is a dark wood that came with the "Mississippi River boat" kit, and I have enough left to cover the large decks. I cannot name the type. I am going to plank it with 20ft planks randemly set and stained natural. like you did on the Bertrand I think.  I know that they should probably be red, but since this will truly be a factious boat I will deviate from the norm. 

 

How llong is the Bertrand?

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

I think Bertrand was around 160 feet long, which at 1:87 comes out to a little over two feet. The decking looks nice so far; I'm a big fan of that varied, weathered look: whether or not it's more accurate, it tends to feel more realistic than a uniform painted finish. And, as you said, perfect for a fictitious boat anyway.

Link to comment
Share on other sites

FYI

HI Mates, came across another site for picture reference, Years back Ralph DuPae collected pictures of river boats across the country. He found over 40,000 pictures and they are digital store to view and order from the Murphy Library located at the university of Wisconsion digital collection. uwdc.library.wisc.edu.

 

also the egregious (steamboat journal), S & D reflector (sons and daughters of pioneer rivermen) and American steamwheel association (sternwheeler).

Lee

Link to comment
Share on other sites

Here is another update.

 

post-14839-0-28657800-1480951252_thumb.jpg

 

post-14839-0-86156300-1480951323_thumb.jpg

 

As you can see I have finished the planking and stained it natural.

post-14839-0-01882800-1480951656_thumb.jpg

 

post-14839-0-28318200-1480951402_thumb.jpg

 

 

 

Also finished the framing and stained it Golden Oak. There is much more framing and a lot of that gets painted white.

I have the boiler 90% complete so I added it a shot of it.

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

The boiler was built out of 11/8 dowel for boiler, 3/8 for high pressure outlet, and 3/16 for safety valve. Still have to add water inlet, and safety valve outlet to stacks. Very little will be visible but it is fun to build. I plan to hang  the high pressure line to the engine from the overhead, and paint it white to simulate the asbestos.

Since there doesn’t seem to be a real stern wheel “city of  Monroe” I am going to  design as I go from here based on using up the material I have is stock.

Thanks for your interest

 

Clarence

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

  • 3 weeks later...

I made a little more progress. i have decided that there doesn't appear to have been a real sternwheel "City of Monroe" I would deviate from the plans a little bit and take some of the features of the "Carneal Goldman" show on page 17 in the book "The Mississippi Steamboat Era".

 

Anyway here are some pictures of progress to date.

 

post-14839-0-73444200-1482588567_thumb.jpg

 

post-14839-0-75790500-1482588597_thumb.jpg

 

post-14839-0-34394300-1482588869_thumb.jpg

 

As you can see I am still calling it the "City of Monroe"

 

I need to touch up the paint. It is surprising what shows up it pictures that you never see when you look at it. 

 

Merry Christmas to All

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

Link to comment
Share on other sites

The lettering was done with Mirtosoft Publisher and printed on decal paper. I then sprayed it with clear so the water would not wash off.

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

She's really coming along, and looking good.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

  • 1 month later...

I made a little progress I am trying to make it look used, and show a little wear. This lets me cover up a lot of my errors. I am going to finish the boiler deck base and then do the wiring to the lights on the main desk. Also you can see I decided to make it a wood burner.

 

 post-14839-0-44057400-1485368385_thumb.jpg

 

post-14839-0-73270500-1485368463_thumb.jpg

 

post-14839-0-00448600-1485368678_thumb.jpg

Flying Fish --  MSW

Essex ---  MSW

Constitution  --  MSW

Confederacy -- MSW

Philadelphia -- MSW 

Chaperon -- MSW

San Felipe -- Panart

Portland -- Bluejacket

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...