-
Posts
2,305 -
Joined
-
Last visited
Reputation Activity
-
NMBROOK got a reaction from egkb in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Thanks mate!Unfortunately I have to do it all again on mark 2.Janos's picture has highlighted errors in the kit drawing profile,so I will revisit this probably next weekend and make some amendments to the drawing before starting again.Whilst everything else is correct,the line of the nose is wrong and I haven't enough material to work with.I need to alter i.e. almost remove the slot as I have discovered another picture that shows how things fit together.I was struggling with some b/w pics and shadows looked like parts of the ship.I may well just take a step back and redraw the whole prow out with the other necessary changes before making any more sawdust in this area.The museum model's figurehead actually looks more like a bear(apart from the mane)whereas the kit figurehead resembles a Chinese style lion.I shall carry on with hull construction in the meantime while my blood pressure returns to normal
Kind Regards
Nigel
-
NMBROOK reacted to Blue Ensign in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I will be following your approach to figure creating with interest Nigel, something I've always shied away from.
B.E.
-
NMBROOK got a reaction from WackoWolf in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Hi Matti
Not really unfortunately,I did weigh it up,but there isn't enough material from the bridge of the nose downwards.I have carved the crown outline already to get a guide for the shape of the head.I have plenty of boxwood
Kind Regards
Nigel
-
NMBROOK got a reaction from mtaylor in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Thanks mate!Unfortunately I have to do it all again on mark 2.Janos's picture has highlighted errors in the kit drawing profile,so I will revisit this probably next weekend and make some amendments to the drawing before starting again.Whilst everything else is correct,the line of the nose is wrong and I haven't enough material to work with.I need to alter i.e. almost remove the slot as I have discovered another picture that shows how things fit together.I was struggling with some b/w pics and shadows looked like parts of the ship.I may well just take a step back and redraw the whole prow out with the other necessary changes before making any more sawdust in this area.The museum model's figurehead actually looks more like a bear(apart from the mane)whereas the kit figurehead resembles a Chinese style lion.I shall carry on with hull construction in the meantime while my blood pressure returns to normal
Kind Regards
Nigel
-
NMBROOK got a reaction from cog in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK reacted to mathewp in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Wow. Some serious mods there, and she looks great so far. I cant wait to see the rest of your build.
-
NMBROOK got a reaction from tarbrush in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from NAZGÛL in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Hi Matti
Not really unfortunately,I did weigh it up,but there isn't enough material from the bridge of the nose downwards.I have carved the crown outline already to get a guide for the shape of the head.I have plenty of boxwood
Kind Regards
Nigel
-
NMBROOK got a reaction from Kevin in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from WackoWolf in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Thanks mate!Unfortunately I have to do it all again on mark 2.Janos's picture has highlighted errors in the kit drawing profile,so I will revisit this probably next weekend and make some amendments to the drawing before starting again.Whilst everything else is correct,the line of the nose is wrong and I haven't enough material to work with.I need to alter i.e. almost remove the slot as I have discovered another picture that shows how things fit together.I was struggling with some b/w pics and shadows looked like parts of the ship.I may well just take a step back and redraw the whole prow out with the other necessary changes before making any more sawdust in this area.The museum model's figurehead actually looks more like a bear(apart from the mane)whereas the kit figurehead resembles a Chinese style lion.I shall carry on with hull construction in the meantime while my blood pressure returns to normal
Kind Regards
Nigel
-
NMBROOK got a reaction from cog in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have now fitted all the upper gunport cills.These have been faired off flush inside and out.The counter side timber has also been fitted,but the lower hull is still to shape at a later date.There is quite a bit of difference between kit and builders model in this area.Franklin states in his book that the stern balcony actually has a grated deck.The carvings below the balcony act as knees to support this deck and to a lesser extent the stern structure.This is not easily visible in pictures but after enlarging the NMM pics as much as possible it became clear how this construction worked.
This is a far as I am taking this side for now,work will commence on the port side.There a still some small round gunports to create for the poopdeck,but I am not confident to the actual finished level of this deck at the moment so they will be added a little later.
Kind Regards
Nigel
-
NMBROOK got a reaction from cog in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Work is slowly progressing on the port side.As I have proved everything on the starboard side,this acts as a template for the port side.This has enabled me to fit the gunport frames earlier in the process to make it easier to shape the internal profile.The handy thing with the gunport design is that tweaks are easy.Some of the holes for the linings have been adjusted and boxwood veneer shims used to ensure perfect alignment when sighting down the side of the hull.I have also been able to fit the lower counter side timber earlier than before.The rather random looking pear blocks at the bow are for shaping to match the other side.The are placed to ensure adequate material to carve the shape out of.
Kind Regards
Nigel
-
NMBROOK reacted to derebek in Peleng-i Bahri 1777 by derebek - 1/48 - POF - Ottoman Galleon
interesting keel but You must believe in your eyes
-
NMBROOK reacted to NAZGÛL in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
Yay, blue purple thingy is getting friends!
Very interesting to see your approach and it's looking great so far You are so much more structured than me when you work.
/Matti
-
NMBROOK got a reaction from avsjerome2003 in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from MarisStella.hr in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from egkb in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from ChrisLBren in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from mij in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from Blue Ensign in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from mathewp in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from NAZGÛL in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK got a reaction from gjdale in MORDAUNT 1681 by NMBROOK - Euromodel - 1:60 - Beyond Bashed
I have started a job on the side that will run in conjunction with the main construction work.This is that of the figurehead.There are differences between museum model and the kit.The main one being there are two 'characters' behind the lion.I say characters because I am still uncertain as to what they are They remind me very much of the 'purple' thingy on Matti's Vasa build .However these affect the shape of the prow considerably and I will need to produce this trio of carvings to be able to determine the prow shape.
Some good news is that the museum model's Lion is tailless unlike the one on the kit plans and it is not clutching an emblem also shown on the plans.It is a nice change that research actually simplifies a design .Anyway I chose to take a copy of the Lion shown on the plans and use this,just omit tail and emblem,as it will be far more convincing than my freehand drawing attempts.The copy was glued onto a piece of European box of suitable thickness.
I first milled the slot for the prow,but leaving a small section at the feet.This will be removed later when the bulk of the shaping is done,it simply serves to keep a little strength for now while the rough work is done.The profile was cut using a combination of the miller,large scalpel and burrs.The result in the pics is from about 8 hours work!!.
The very thin wafer at the mouth will hopefully be the tongue when finished
Kind Regards
Nigel
-
NMBROOK reacted to dvm27 in HMS Pandora 1779 by Bruno Siljeg - 1/48 - Navy Board Style
Narim's Pandora, one of the sweetest models I've ever seen, does not depict the rabbet step. See http://forum.modelsworld.ru/topic8068.html
-
NMBROOK got a reaction from riverboat in San Ildefonso by Sjors - FINISHED - OcCre - 1:70
Sjors I would keep looking in the fridge to make sure the wood is not warping!!
Kind Regards
Nigel