mdulaney
-
Posts
23 -
Joined
-
Last visited
Recent Profile Visitors
610 profile views
-
mtaylor reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
mtaylor reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
steamschooner reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
Roger Pellett reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
yvesvidal reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
ccoyle reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
Keith Black reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
Keith Black reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
GrandpaPhil reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
KeithAug reacted to a post in a topic:
SS Virginia V by mdulaney - Scale 1:48 - 1922 Maiden Voyage
-
I am! I have a pretty good idea what the engine room looked like, and of course the engine is the same. I think I'll do what would be visible through the windows, though if I could get the engine to move if the prop is rotated, that'd be a superb bonus.
-
Right now, I'm waiting for all the existing drawings to be professionally scanned. Note that the following drawings were laid out on the floor and photographed with a cell phone, and as such will not be used for anything besides initial planning. This first drawing comes from a set drawn by the builder's son in October 1921. As a primary source, it is obviously valuable, but there are differences between these plans and what was actually constructed. For example, there was only one pair of boats on the boat deck (as can be clearly seen in the maiden voyage photograph). One of the other drawings contains features that, while present aft, did not run the length of the ship. However, I will use these drawings to get dimensions for windows, the wheel house, etc. There are also no known photographs of the starboard side prior to 1934, so this is the only data I have for window configuration on this side. Lines, as drawn 1934 by a professional marine architect. I will be referencing these as well as measurements taken off the ship when I draft my own drawings. The final drawing I'll be posting this evening. This demonstrates the changes made to the ship after the 1934 rebuild.
-
This is a build log for the last operating wood passenger steamer in the US, the Virginia V. There has not been a truly accurate model of this ship built that I am aware of. I know of two scratchbuilt models, and oddly one commercially produced (in China) one. Of the two scratchbuilt models, one is significantly better than the other, but still contains anachronisms and inaccuracies. I do have a few advantages over most scratch builders in that I have full run of both the ship as well as the Virginia V Foundation's archives. I am also an oiler on the ship, and if you go into the engine room now and point at a valve I can tell you what it does and when the last time I personally repacked it was. I also took many photos of the framing of the ship while we were hauled out 2021-2022 having much of the hull replanked. The ship's maiden voyage in 1922; this is the appearance I aim to replicate: And, for comparison, the ship today:
-
I've actually made some progress; however, not long after doing this work, I came down with an aweful sickness (not covid) and have been bedridden the last two weeks.
-
The booklet says the boat was purchased in NYC and hadn't been built as a Navy boat. One thing I have to watch out for is I am familiar with a more modern steam plant, and will need to do my research to be sure I don't do things that are too new.
-
I started off working on the fairing of some of the bulkheads. It's hard to tell from the photo, but I didn't take them quite down to the lines. I want some wood to still be available so I can do the final work once I can start laying batons and checking.
-
I haven't built a ship model of any sort in a number of years, and I want to get back into the game, so to speak. The last several I built were scratch, but I decided to get a kit with some thought in the direction of easing back into the skills required (also, I don't really have a stock of scratchbuilding supplies like I used to). This kit happened to be on Ebay for a reasonable price, and fits in with my interests. I have no comment on the hull; considering the lack of information on the prototype, I will build the hull as per instructions (more or less). The steam plant, however, is another story. Once again, there is a lack of prototype information, but the way the plant is depicted has a few issues I can see right off. For example, the valve handles look modern to my eyes, and I'll need to research them further. I'm also fairly confident that the main steam line would have been lagged. We'll see what I come up with.
-
They have many uses, but mostly as stanchions for hand rails and the like. The idea is to fit .008" bronze wire.
-
Yeah, I've used PPD for things before; it just would have been easier to click 'add to cart' and then 'checkout', or, I was trying to be lazy
-
Does anyone make etched eyes? I'm looking for very small ones, with an ID of the eye itself around .009, .010 inch.
-
Steamboats and other rivercraft - general discussion
mdulaney replied to Cathead's topic in Nautical/Naval History
Well, she's entering her 97th year. She's the last of the Puget Sound steamers, and still has her original engine. She was built by Matt Anderson in his backyard for West Pass Transportation Company. She did the Seattle-Vashon Island-Tacoma run for eighteen years, before being taken down to run on the Columbia for a year. From then until around 1980 she worked as a charter vessel, then becoming a museum ship. The engine is older than the ship. The engine is triple expansion and was built in 1904 by Heffernan Engine Works of Seattle. It was originally installed in a vessel known as the Tyrus, which, when bought by WPTCo., was renamed Virginia IV. We still go out; made over 70 trips last year. I guess, from here, what do you want to know? I can tell you in detail how to bring the plant up, but just be warned that I am not a very exciting writer. The photos are the 1922 maiden voyage, 1935, a week ago (with my cell phone as I didn't have any other camera), and me fighting with the vacuum pump.
- 281 replies
-
- 11
-
-
- Steamboats
- riverboats
- (and 3 more)
-
Steamboats and other rivercraft - general discussion
mdulaney replied to Cathead's topic in Nautical/Naval History
One thing that I find interesting is that a lot of the river steamer crews of North Carolina were black. Here, we have the crew of the Hertford, formerly the Olive. She was rebuilt and renamed after seventeen people died when Olive got hit by a tornado and sank.
- 281 replies
-
- 4
-
-
- Steamboats
- riverboats
- (and 3 more)
-
Steamboats and other rivercraft - general discussion
mdulaney replied to Cathead's topic in Nautical/Naval History
Admittedly not a riverboat, but, I work in the engineering department of the steamship Virginia V (I say this to establish my credentials, if you will).
- 281 replies
-
- 2
-
-
- Steamboats
- riverboats
- (and 3 more)
-
As it happens, a few of the windows survive and I have access to them, if you need measurements.
- 749 replies
-
- 6
-
-
- albertic
- ocean liner
- (and 2 more)
Our Emblem ®
