donrobinson

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

I have found that when using a hair dryer to bend planks that if I use dry wood there seems to be a lot of spring back. If I soak it even for a minute or two then apply the heat it holds the bend much better and there is little or no spring back. Might be worth a try

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

I have found that when using a hair dryer to bend planks that if I use dry wood there seems to be a lot of spring back. If I soak it even for a minute or two then apply the heat it holds the bend much better and there is little or no spring back. Might be worth a try

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

I have found that when using a hair dryer to bend planks that if I use dry wood there seems to be a lot of spring back. If I soak it even for a minute or two then apply the heat it holds the bend much better and there is little or no spring back. Might be worth a try

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

This is the start of my Pegasus log which I have been putting off for far too long and decided I would get it going. When I started this hobby a little over a year ago I seen a picture of the Amati Pegasus and instantly wanted her, however, for once in my life I held off starting her as I knew my skill level was not there yet. I feel now if I take my time and with the help available here at MSW I should be able to stumble through and do a fairly good job.
 I know this is a bold step starting this kit as there is some excellent ones on the go now, Blue Ensign and Landlubber Mike  are just two examples of some of the skilled craftsmen here at MSW. Although I do not plan on following in their footsteps, I mean who could, I do plan on making some changes mostly to the kit wood and possibly a few other features(cannons, rigging line etc.).
 I did not include pictures of the contents but if anyone is interested in seeing the contents of this great kit just say so and I will be more than happy to add them.
 Enough of an introduction, it is my hope that I do this girl justice and maybe someday be allowed into that elite Pegasus/fly fraternity. 
 
 To date I have fitted the bulkheads and transom supports. All went together good and there was very little adjustment required. I am impressed with the mdf so far and do not see any problems arising in the future from it, it is defiantly quite a bit denser  than the stuff found in the local lumberyard and should out shine the normal plywood that is typically used.
 The one picture shows the plywood forecastle deck in place, it is not glued down that was just me playing around. In the past year I have had this kit the box has been opened and closed no less than 30-40 times and this piece keeps falling out. So I just put in in place for safe keeping .
 

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

Good Morning All, I trust and hope you all had happy holidays and are now back to the reality of life once again.
 I took the last five days off of my Trabaccolo build to do a little work on my neglected Pegasus, she was very happy to be in the shipyard once again.
First up was fairing the hull, sorry no pictures, then was to install the plywood gun deck. Before doing this supports were required as per so many other logs such as Mike's(Landlubber Mike). So you can see in the pictures how I accomplished this using some 3 x 3mm posts and 1.5 x 5 mm planks.
 

 
Next was the infamous plywood gunport pieces, I had little problems with these which still worries me  . I soaked them for about an hour then bent them using a curling iron. I needed to move them approx 5mm forward as one of the oar holes was being blocked by a bulkhead, but other than that it went smoothly.
 

 
While waiting for glue and paint to dry I thought I would put together the cannon carriages. Many have complained about the Amati carriages , mostly about the quality of the plywood. I am thinking they must have changed their stock as I found these ones to be quite durable and easy to work with, you can be the judge as to how they look. Amati does include 18 carriages and 16 cannons, I'm thinking these extra carriages will work fine as stocking stuffers next Christmas or even mount some chocolate in them and they could be a Easter bunny thing, at any rate they will not go to waste.
A point to note is Do Not paint the bulkheads black above the deck if you wish to paint red later    . Mine took a minimum of ten coats to cover then I just quit.
Here I am using the mill with the sensitive drilling attachment to drill the axles for the pins that hold the trucks on, then it was on to assembling.
 

 
A little out of order but here you can see the result of moving the gun port sides ahead by 5 mm. The stem post and bowsprit are not glued in place, looks so good I feel like making the real bowsprit now.
 

 
And here she is ready for a battle, well kind of, and loaded up for next stage of deck planking
 

 
Here the planking has started using the kit supplied planks. I decided on a four plank shift using 120 mm planks. I built the aft bits as they are noted for not fitting properly mine required minor adjustments and fit perfectly. So with the gunport sides causing no problems and now the bits fitting good I am really getting concerned about my usual not so good luck.  
 In my excitement to start planking I forgot I should have built the hatches first, I don't think this will pose too much of a problem, I will carry on as is and see what happens later with the hatches.
 

 
Have a Good Day

This is the start of my Pegasus log which I have been putting off for far too long and decided I would get it going. When I started this hobby a little over a year ago I seen a picture of the Amati Pegasus and instantly wanted her, however, for once in my life I held off starting her as I knew my skill level was not there yet. I feel now if I take my time and with the help available here at MSW I should be able to stumble through and do a fairly good job.
 I know this is a bold step starting this kit as there is some excellent ones on the go now, Blue Ensign and Landlubber Mike  are just two examples of some of the skilled craftsmen here at MSW. Although I do not plan on following in their footsteps, I mean who could, I do plan on making some changes mostly to the kit wood and possibly a few other features(cannons, rigging line etc.).
 I did not include pictures of the contents but if anyone is interested in seeing the contents of this great kit just say so and I will be more than happy to add them.
 Enough of an introduction, it is my hope that I do this girl justice and maybe someday be allowed into that elite Pegasus/fly fraternity. 
 
 To date I have fitted the bulkheads and transom supports. All went together good and there was very little adjustment required. I am impressed with the mdf so far and do not see any problems arising in the future from it, it is defiantly quite a bit denser  than the stuff found in the local lumberyard and should out shine the normal plywood that is typically used.
 The one picture shows the plywood forecastle deck in place, it is not glued down that was just me playing around. In the past year I have had this kit the box has been opened and closed no less than 30-40 times and this piece keeps falling out. So I just put in in place for safe keeping .
 

Looks nice Zoran, it is a beautiful kit and reminds me that I should get busy on mine  

Looks nice Zoran, it is a beautiful kit and reminds me that I should get busy on mine  

Looks nice Zoran, it is a beautiful kit and reminds me that I should get busy on mine  

Hello Len and Welcome

Hey Dave, all is looking real nice. Without any carvings on the transom I think I would skip any quarter badges. Some lights would probably look good, and would be interesting to watch you build and install them    . If you were thinking of carvings possibly the ones Chuck(NRG) is offering could be fashioned to fit, obviously not the crown but the viney things. At $5 a set it may be worth a try, and if they don't work at least you have gained a little carving experience. 

Hello Len and Welcome

Hi Ulises, I have been following your build and I must say she is turning into a real beauty. I just finished planking the deck of my Trabaccolo using your tutorial and I 'd like to thank you for sharing, it really helped me out.

Hi Al, the spindles and rail look nice and some good ideas with your explanations. I bought some of these spindles also sometime ago when they were on sale and have found no use for them until now, I just need to buy a Ragusian Carrack kit now     

Hey Al, just checking in on your build. Hopfully you and yours had a great holiday season. Looking forward to seeing more of your fine craftsmanship

Looks real nice Dave. Your selection of woods really compliment each other.

Excellent job on the planking Ian, it may have taken longer but it was well worth the extra effort. Holidays coming up?

http://forloversofwood.com/default.aspx