BubbleHead
-
Posts
103 -
Joined
-
Last visited
Reputation Activity
-
BubbleHead got a reaction from Vladimir_Wairoa in HMS Winchelsea 1764 by Bubblehead - 1:48
Thank you. I downloaded everything again, set the printer to custom 100% and #1 bulkhead scale read 1/4" and when printed and compared to the false keel (put in it's slot) it fits perfectly the bottom of the bulkhead hit the bottom of the false keel. I printed cut them out and ready for gluing and cutting and shaping. Staples a mile away and when I had all the others printed thought about having the bulkheads printed but nan I can do it, ha ha.
Tom
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
I have a dilemma about printing and which scale to use?
Printing No 1 bulkhead with the scale.
Print it normal printer is 100% and the scale measures 3/16". Looks good and the bottom of it comes right to the bottom of the false keel. But as I said the scale is 3/16". The width of the bulkhead is 8 11/16" at the second red line, I assuming this is the bottom sill gun port.
Now the dilemma
When I adjust the percentage to 105% to make the scale that's on the print to 1/4" the bulkhead becomes 1/4" Larger and 1/8" taller, The width is 9 1/6" at the second red line and the bottom hangs over the false keel 1/6". But the scale reads 1/4" now.
The false keel prints from the printer the scale reads 1/4".
Which do I use print normal or adjust the scale to 1/4"?
TJ Sorry don't know what I did but they printed out fine.
-
BubbleHead got a reaction from Canute in Can i live without a BYRNES TABLE SAW
Yes I would have to agree with the tilting arbor by Byrnes. I have a tilting table but have never used it. I am now looking for a tilting arbor saw just for ease of operation.
-
BubbleHead got a reaction from billt in Can i live without a BYRNES TABLE SAW
Yes I would have to agree with the tilting arbor by Byrnes. I have a tilting table but have never used it. I am now looking for a tilting arbor saw just for ease of operation.
-
BubbleHead got a reaction from mtaylor in Can i live without a BYRNES TABLE SAW
Yes I would have to agree with the tilting arbor by Byrnes. I have a tilting table but have never used it. I am now looking for a tilting arbor saw just for ease of operation.
-
BubbleHead got a reaction from Moab in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from Jorge Diaz O in TJ's First Scratch Build 1:48
Lining Out
Well spent most of the day off and on making battens of various sizes and kinds, glue and tape, nothing worked for me couldn't get them to lay flat spaced right moving them around to get the space to look right and stuck again was to say the lest a mess. So taking some advice I went to line and double sided tape and in about half hour I was done well I think I'm done. I'll put some watered down white glue on to hold them in place better.
What do you think will this work. Do they look OK.
TJ
-
-
-
BubbleHead got a reaction from Canute in Domanoff Ordering
Please could someone tell me, I would like to order Domanoff rope walk. Irt says send an "Inquiries" does this mean I am ordering and paying for the product?
Thank you
Tom
-
BubbleHead got a reaction from thibaultron in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from John Cheevers in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from Canute in Laying out plans in a smaller workshop
This is what I did simple. With full extension slides.
-
BubbleHead got a reaction from thibaultron in Laying out plans in a smaller workshop
This is what I did simple. With full extension slides.
-
BubbleHead got a reaction from lmagna in Laying out plans in a smaller workshop
This is what I did simple. With full extension slides.
-
BubbleHead got a reaction from mtaylor in Laying out plans in a smaller workshop
This is what I did simple. With full extension slides.
-
BubbleHead got a reaction from Canute in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from marktiedens in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from JpR62 in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from Mahuna in Centering Tools
When I try to use the typical centering tool I'm all ways fumbling with the two pieces and finally put the square or round stock in the vice and mark the end. Frustrating.
Well problem solved and I would like to share with you what I have found, it's new to me and may be not to new to others. I do not represent Woodpecker tools nor am I advertising for them, but this is great spendy, $29.99+ shipping makes it $39.89 a lot for such a little device just to draw a line.
What do you think.
TJ
-
BubbleHead got a reaction from thibaultron in How to make sail look like wind is blowing in them
A long long time ago this subject was addressed some what and one molder had pic of what he did. He made a stand ( two vertical poles) rigged the sail as if it were on the ship ( spar in place) tied the four corners to the poles with a short line from the pole to the corner of the sail, turned on a fan, filled the sail to desired look sprayed with hair spray (final net ) or applied deluded glue. I thought this was a grate idea.
TJ
-
BubbleHead got a reaction from mtaylor in Returned after lay off because of heart problems.
Thank you Anja forgot.
Sent files today. Hope you got them as there are several emails.
Tom
-
BubbleHead got a reaction from Canute in Returned after lay off because of heart problems.
Thank you Anja forgot.
Sent files today. Hope you got them as there are several emails.
Tom
-
BubbleHead got a reaction from Anja in Returned after lay off because of heart problems.
Thank you Anja forgot.
Sent files today. Hope you got them as there are several emails.
Tom
-
BubbleHead got a reaction from Canute in Returned after lay off because of heart problems.
I Still have copy of the files and be glad to download them or what I have on the disc. Now to figure out how? I keep crashing. File too big. If you you would please send me an email to ********.com Ill send it that way. Guess I don't know what I' doing hear.
Tom
Our Emblem ®
