Jump to content
Welcome to our new sponsor - Portland Scale Ship Co.! Specializing in Scale model ship kits and building chapters for the HMS Winchelsea and other ships ×

CDW

NRG Member
 View Profile  See their activity

  • Posts

    7,760

  • Joined

  • Last visited

 Content Type 

Everything posted by CDW

  1. CDW
    The rear deck now in place, the main deck is ready for guns and superstructure components.
  2. CDW
    Those are not the photo etch chains. Those are the molded on chains which I chose not to remove and replace with two dimensional photo etch chains. The wooden deck calls for removal of the molded chains and replacing them with photo etch. I think that's a bad idea in this particular case because of the quality of the Flyhawk molded plastic details.
  3. CDW
    I mixed three parts Tamiya flat white with one part Tamiya flat buff and I think it's pretty close for a match. After it dries, will use a little dark wash and it should be good to go. Need to come back and detail touch-up those molded chains.
  4. CDW
    Started laying down the wood deck pieces. The molded anchor chains are quite good and acceptable, but unfortunately must be removed in order to install the small wood deck pieces around them/under them. The replacement for the chains is photo etched chain and not quite as nice as the molded chains because the PE chain is 2 dimensional. Maybe I will test some paint to try and match the color of the wood deck and just paint the small deck areas around the molded chains and that way leave them in place.
  5. CDW
    Main guns ready for paint. There are more secondary guns to do.
  6. CDW
    I can hardly believe how small some of the parts are cast. Parts 10 and 11 are so small, they are lost in the creases of the face on the coin.
  7. CDW
    inadvertent extra post
  8. CDW
    inadvertent extra post
  9. CDW
    inadvertent extra post
  10. CDW
    That works perfectly for straight gun barrels, but the Scharnhorst gun barrels are stepped down. Larger diameter at the base then smaller diameter for the length of the barrel. The brass barrels are turned on a lathe to achieve that step in diameter.
  11. CDW
    I've got secondary's.
  12. CDW
    While the injection molding is superb on this Flyhawk kit, the brass barrels do make a difference. Here I began working on the secondary guns first by cutting off the plastic barrels. Our dog gets daily injections of insulin to control his diabetes. The left over syringes come in handy as micro drills as they are super sharp and very thin, much thinner than any of the twist drill bits I have. By far these are the smallest barrels I have worked with to date.
  13. CDW
    Curing the new paint in the dehydrator at 105 degrees F. for a couple of hours. This makes the paint very durable and resistant to damage from handling later on.
  14. CDW
    Finally got around to painting the hull. It's a start.
  15. CDW
    Here is my chief model inspector and chowhound, Jasper. He's patiently waiting for me to get the black primer down on my hull.
  16. CDW
    The PT Boat looks great Denis! Our daughter was telling us today that you guys in NH are going to be getting some more snow tonight or in the morning. Bummer.
  17. CDW
    Overall hull length is about 13", maybe a little less. Plastic is on the soft side, making it easy to sand down. Molded on details very clean and crisp. Just wanted to capture some photos of it before laying down primer.
  18. CDW
    After I open the parts bags, I want to photograph the sprues. You won't believe the fine detail of the molded parts. Makes you realize how far this hobby has come in the past few years. The parts molds nowadays are light years ahead of what we thought was great 10 or 20 years ago. I didn't want to open the parts bags until I am ready to use them in fear of breaking and/or losing the parts. They are that small and delicate. With this one started, I am now interested in the other 1:700 ship models Flyhawk makes. I never much cared for 1:700 scale before because it was so small and often parts looked out of scale and cartoonish. Not with Flyhawk. Downside is, they are a little on the pricey side.
  19. CDW
    Finally made a humble start on the shiny horse last night, gluing together the upper and lower hull parts then a little sanding and filling of the seams. Now that I look at this kit more in detail, it becomes obvious the model can be built quite nicely straight out of the box except you would need some photo etch railings. The plastic parts are extraordinary, fine details and molded very much to scale. Even the metal barrels are not entirely needed. I'm even thinking I may have been better off with a precut masking set for the deck (cheaper) rather than the wood deck. I'll wait until I have more done before taking some photos. I think this is going to be a fun little build and quite pleasing to the eye with the molded details.
  20. CDW
    It is weird how bamboo sheds it’s bark like a lizard sheds it’s skin.
  21. CDW
    There's a row of trees and vegetation that grows along the back fence line between me and my commercial property neighbor. I've got bamboo back there that rivals anything you ever saw in Vietnam. What you see is as high as this climber is going to climb and the wife says I have no business doing that, even. Women...what do they know? 😄
  22. CDW
    Thanks Denis. Tree trimming on top of me shed today. Spring has sprung, Fall has fell, and it's very very warm today.
  23. CDW
    I've had those Small Shop pieces for several years now and they work great!
  24. CDW
    Today I am going to search for an appropriate size piece of wood to mount the model. I am considering cutting off part of the full hull and mounting it on an ocean diorama.
  25. CDW
    I've been quietly building a stash of IJN kits as well. But the Scharnhorst and Roma are two favorites.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...