Jump to content
MSW Spring Donation Drive

CDW

NRG Member
 View Profile  See their activity

  • Posts

    7,326

  • Joined

  • Last visited

 Content Type 

Everything posted by CDW

  1. CDW
    Decal work is done now. All clear top coats are finished. Chassis assembly is 90% done with some details remaining. Lots of small trim work to be done on the body and bed, adding headlights, grill, tail lights, nerf bars, and bed rails/fuel tank cap. Engine and transmission have been assembled and painted but needs to be installed along with the headers, firewall, radiator, and hoses. Interior work needs finishing. Of course, we still are without wheels and tires. More to come.
  2. CDW
    I had lots of problems with both issues. If I had it to do over again, I would change the rigging so the main derrick is in a raised position rather than lowered. Otherwise, I just positioned the boom in a fixed position, a location between rigging lines as I assume the way they used it was to raise and lower it as needed between rigging as there is no way the boom can swing between all those lines. As for the rigging interfering with the ship's boats (or vice versa), I repositioned my rigging location points several times to find something that would work without interference. It's frustrating, I know.
  3. CDW
    Flory has tons of free Youtube videos for specific builds, product reviews, etc. Just do a search on Youtube.
  4. CDW
    Here is a picture of it Greg. Not sure where you might source it on your side of the planet, but I guess it wouldn't be hard to find. Maybe BNA Modelworld has it. Set 1 comes with the smallest diameter tubes, set 2 just a little larger. Honestly, the tubes in set 1 are so small (inside diameter), I would advise set 2 as the most practical to use. The photo is in high definition, so you should be able to magnify it to see the details.
  5. CDW
    The smallest brass tubing I have found is from Trumpeter. Not many shops carry it, you'll just have to do a google search to find a shop of your choosing who has it. Some of it is so small, you can't even pass ez line thread through it, so it can't be out of scale. Good luck with your endeavor, and oh, by the way, don't worry about highjacking my thread. I didn't feel you highjacked it at all. To the contrary, I enjoyed your photos and conversation. You're welcome back anytime. Happy modeling
  6. CDW
    The next time I build and rig a model the size of Mikasa, I am going to use the same technique to seize the rigging lines that I use for seizing the rigging of my WW1 model airplanes. I cut off a tiny piece of micro brass tubing, run the rigging line through it, then loop it back through the tubing to seize it (with a tiny dab of super glue). Knots wouldn't be appropriate for the rigging on ships from this period, or at least that's my best guess. Here is a photograph of an Albatros biplane where I've seized the rigging using micro tubing:
  7. CDW
  8. CDW
    It most certainly would cause an imbalance. However, I cannot decal the hood until the top coat cures, and the hood decals run over onto the nose piece, so it all must be done at one time. Will be working on that tomorrow after the paint has plenty of time to fully harden. Remember, I had to rework the hood because I didn't shoot enough pearl white on it to match the other parts. Fixed that.
  9. CDW
    Just about everything but taking a bath could include a long sleeve shirt and tie back then.
  10. CDW
  11. CDW
    Laid down a couple of good coats of urethane clear (w/hardener) over my body parts with decals, as well as the refinished hood. Came out great, but it's hands-off for at least another 24 hours until it cures. Got a little worried after the first coat over the decals, as it looked like tiny little fish eye pock marks over some of the decals. Thought maybe the decals had a bad reaction to the clear. But I realized when I applied the second (and last) coat, I needed to lay it down heavy and it came out smooth as glass. The clear urethane had no tendency to run and could take a heavy coat. Really nice paint combo, the acrylic color under the urethane clear. I was a little skeptical at first but it worked beautifully well I think. The thing you have to remember with acrylics, particularly the metallics and pearls, there is little to no chance to fix a problem area because acrylic can't be sanded. If you try to sand it, it just rolls up and makes a mess. If it's bad, the best bet is to strip it down and do it over again. I'll get some pictures later when it's safe to handle.
  12. CDW
    My distributor carries a line of solvent based paints very similar to the Gravity line, called Splash. Lots and lots of auto-based colors. I ordered some last night. I have a lot of car models that need to be finished. Yes, the running boards have decals.
  13. CDW
    Using aluminum foil to help direct the paint into a bottle is a great idea. Will have to try that. The whole reason I wanted to try the Createx Wicked line of acrylic paints (top coated with a solvent based clear coat) was because of the vast array of colors they offer at a low cost with the convenience of acrylic. As an added bonus, a local vendor is a distributor.
  14. CDW
    Looks great! I'll bet there are parts for rigging the torpedo nets on those frets as well. Pontos doesn't show where all the parts are to be used.
  15. CDW
    All the body parts got the clear coat buffed down with a 3000 grit sanding sponge to prepare for decals. The hood got a couple of shots of pearl white in hopes of getting it matched with the other body parts. After the decals are all down, the body parts including the hood will get a coat of clear, the hood a couple of coats. All the decals are in place on the body parts with the exception of the hood. It will take a couple more days to decal the hood after it's clear coated. While the Ala-Kart was Hemi powered, the kit engine looks small.....because it was small. The engine was just a 241 cubic inch Hemi, much smaller than the "elephant engine" Hemi's we are accustomed to seeing in drag racing.
  16. CDW
    Thanks OC!
  17. CDW
    You're right Denis. The finish came out beautiful. A little polish and it will look fantastic. I just wish I had paid closer attention and held the parts side-by-side to make sure the pearl on each part looked the same. Spraying white pearl on top of white primer makes it very hard to see how much paint is going down, but it's necessary to get the shade of white I was wanting. Thanks for your kind comment. I should also mention that the suggestion Hexnut made to use Tamiya rattle can paint is good, too. I have gotten some beautiful finishes using their rattle can paint. The down side to rattle cans is a lack of control for how much paint comes out, which can sometimes obliterate small details. Airbrush allows us to regulate the spray pattern so much more so fine coats can be achieved.
  18. CDW
    Where I went wrong: I should have had all the body parts sitting in line, in their proper order, when I was shooting the color with my airbrush. Instead, I had each individual part on a stick and I painted each, one by one rather than painting them all at the same time. Had I painted them all at the same time, sharing each stroke/pass of the airbrush, this one not have happened. The way I did it, I could have just as easily gotten a poor result with the Tamiya paint as well. With the decals that are going on, and the fact the model will be displayed with the hood off, I am leaning toward leaving it alone, as-is. Another alternative would be to strip down just the hood and do it all over again.
  19. CDW
    Now that the light of day is here, I can clearly see that not enough pearl white was laid down on the hood, leaving it a lighter different shade of white (brighter) than the other body parts. Guess I need better lighting in my work shop area where I paint, 'cause I sure didn't notice it last night. Pearl colors along with metallics are notoriously hard to paint in the first place. It's all too easy to have your pearl/metal pigments segregate which will leave visible blemishes. This segregation often comes when varying amounts of paint get laid down. Consistency is key when spraying these paints. I might be able to add some more pearl over the top-coated hood, then top coat again. Not sure how that would turn out though. It might make it worse. Then again, I could get the decals laid down and maybe the color difference will not be all that noticeable. All I know is, it's very noticeable to me, but you sure can't see it very well in pictures. I am going to give this topcoat a full 72 hours to cure before I do anything else with it.
  20. CDW
    Having fun is what it's all about. In the process, you are achieving quite an accomplishment, particularly considering the fact you've built this model from scratch. Very nice indeed, Phil.
  21. CDW
    Did a little additional investigation and learned I only needed to wait 60 minutes to apply the top clear coat, so it's now got 3 clear coats. Will wait until tomorrow and polish it up a bit first, then apply the decals. Once the decals have had at least a day to dry, will top coat those as well to finish it off.
  22. CDW
    After the body parts prep, sprayed on 3 coats of Tamiya white fine primer. Next, polished up the primer a bit and touched up a few spots. Then it was time to spray on the Createx Wicked Pearl White paint. These are acrylic paints, water based. Pearl colors are not opaque, so it's important to choose the right colors for your primer depending on your finish coat. These paints are not going to do well over bare plastic, they must be primed first for the paint to have something to grab onto. Additionally, they must be sprayed on in multiple fine coats. Heavy coats would be a disaster. Because of the pearl color, I put down four light coats giving each coat about 5-10 minutes drying time in between coats. Just to stay on the safe side, I used the Createx proprietary primer, their stock number 4012. Although I have read others say you can use other acrylic primers as well, like Vallejo primer. But alcohol and other reducers that work with Tamiya and Mr Color paints will damage Createx paint and should be avoided altogether. The following pictures are of the Pearl White painted body parts. I will wait a few days to apply the 2-part diamond clear coats. In the meantime, will probably start building and painting the sub assemblies.
  23. CDW
    Just a stunningly beautiful model. She does such tribute to the men who served aboard Liberty ships in WW2. A fitting subject for Memorial day.
  24. CDW
    It's an excellent tool for re scribing or deepening panel lines.
  25. CDW
    When building car models, I like to carefully examine the body/parts to identify any imperfections caused by mold separation lines. These will leave a raised line along the body that needs to be removed before priming. To help see what I'm doing, I'll first mark the lines with a sharpie permanent marker. Then will use sanding sticks to sand away the imperfections. When the sharpie mark is removed, I know enough sanding has been done. Next, I rescribe any panel lines that need to be a little deeper and wider to prevent the coats of paint from filling them. In this case, the doors. Last, I will go over all the body parts with fine sand paper/sanding sponge to prep it for the primer.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...