svein erik
-
Posts
611 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by svein erik
-
Yes I did also feel so, here is a photo of the corronades with 2.5mm Canon ball , it fitts😁
-
Working my way in to .... dekk fittings weel from syrenscompany. The pumpe is nerly finish etc, but I did drill the hull for the Canon ball ,eeee it sems to look to small so I try with bigger 2.5mm and tested it in to the 18 punds corronades from cadlecraft (it fitts ) Maby I use this insted 😊
-
Hanks chazz Do you have a photo? Svein.erik
-
I have to do some mor test so I did find some pins from artesania kit I had and tested with to sorts of blackening liquid, I did also try it on a tube from K&S (the result speek from it self) The pins I have from ME (syren kit) has to be made from ....... it is crapy 😲
-
Hi chris no I havent, but t think I wil do so, but I think I need a nose pilers thats nerow to make them small to match the 1/64 scale 😊 Svein.erik
-
Hi Dos anyone know's were the kit eyepins from ME is made? the brass eyepins thats comes with the syren kit Seems to be different or crapy one, I have dunn the blackenig befor with good result, but this time it Seems to not stikk I did try acid dip first and so on... but its turn out the same 😲( I used carr's) Svein.erik
-
Thanks😊 thats wat I was looking fore, am waiting for the book , lennarth petersson about rigging. but I like the photo,now I can see how it looks😊 Svein.erik
-
Hi Jim I think I did find it out , a sling on the yard , this wil be atatch to a bigger sling from the tristletree then a rope is run true the blocks opp around the tree true som mor blocks something like that.... Se photo Svein.erik
-
Hi a questions about the rigging of the main/fore lower course yards (brig syren ) There is a block where the sling is ( sling cleats) Is this rigged be side the sling or is this one of all? Svein.erik
-
Some info of the ship Svein.erik
-
Hi, and thanks again for the liks, am trying out my New tool, so I started making some mast the main and fore lower course yards I thing it looks nice when rigg😊 Svein.erik
-
Hi folks😊 The syren is coming a long now, the hull /copper plates are now looking old and used may needs some repers soon on the slip, LOL I did also finish the conpanionway construction left the dor out for now so I dont damige it. Everything is not glue to the dekk yet. Svein.erik
-
Thanks for the likes am now ready to mill my own planks an other stuff, and also the lathe for the mast 😊 the tool is proxxon! Svein.erik
-
Yeee, I have finish the copper plates now , Wat a task 😊 I also made a New stamp for the dressing belt etc and am happy with the outcome since its my first time to copper plates 😊
-
Thanks for the comments Jim and sal I wil try to use a roller😄 I wil post photo wen the copper plates are finish 😊 Svein.erik
-
Dam this is a nice pice 😊 did the center board have an open space on each side to let the water run true ? Svein.erik
- 421 replies
-
- 3
-
-
- medway longboat
- Syren Ship Model Company
- (and 1 more)
-
Thanks for that Thomas Am just back from a trip and ready to copper again , finish it but it Seems to me the plates a slipping 😲 I used sanding sealer befor I started the task maby it was a wrong idé? And I have also only used gloves for this task. Svein.erik
-
Hi everyone 😊 Befor I take the task of finishing the copper plates I needed a brake, so I pre made some dekk fittings (not finish yet) Gratings are from syrenshipsmodellcompany Svein.erik
-
Finish 😅 one side, more to go before the copper plates is dunn! Svein.erik
-
Ups!! I think something went wrong here🙊🙈🙉
-
Thanks for the liks everyone, my plating is going forward, it was much easier then I belive, but am not finished yet I hope my curve on the plates is going g to make a problem to me, specialy at the bow! Svein.erik
-
Thanks for the liks and comments I started the copper plating now , its my first time for this and I hope it goes well😉 Svein.erik
-
Thanks for that Jim The dekk needs more cleening, but do that later wen the last nails are dunn I wil drill some hulls on both ends of the hatches . Svein.erik
-
Thanks for the liks and comments I yust finish the treenail on the dekk, I need some more later wen the hatches is in place I used #77 drill bit for this and some wood filler (darker one) and I used 2 hull in one plank Soon I starts on the copper plates 😶 yeee. .... Svein.erik
-
Grait build, Its Soon for the mast and rigging 😲 take care! Svein.erik
- 242 replies
-
- 2
-
-
- syren
- model shipways
- (and 1 more)
Our Emblem ®
