svein erik
-
Posts
610 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by svein erik
-
wat is the best way to make the rigging for the harts and collar ? svein erik
-
hi dubz , yes it was in my mind , i was in yor log after i have dunn it😲 but i was thimkimg about the space to do it? that is we build the model a little difrrent so if i do it i make the tiller longer ad you did ... but may my... you are a grait builde and am not there yet.. but i a will do it 😊
-
thanks for the likes! am working my way to the end of inboard fittings, the 12 punds gun are rigged, also the ships weel and tiller. am started to build the hammock cranes ( test fitting) svein erik
-
thanks everione for the likes/coments now... the rope coils for the corronadas is made and glued on, am starting to finish off all the dekk fittings etc and the long guns😊 svein-erik
-
wat a beauteful work and ship😲 svein-erik
-
yust finish the corronsdas rigging (rope coils is not on board yet) some dry fittings again before i get some more detalj on the deck fittings. fore me this part of the work on syren is the most fun parts😉 its now everything comes together !!
-
hi its not a fishingvessel,or..... wel in ww2 this ship laid a cable in the habur (us) to prevent enemy sub comming in, there were also guns on the deck etc. but am not building the peqout at this time frame but from the time 1908 . all the info can be read at the indicator loop. Indicator Loop Cable Laying Ship USCG Pequot
-
started the rigging of the 8 first corronadas, its small....... thanks for the tweezers..LOL😉 svein-erik
-
am now back .... all the corronadas is now onboard ready to be rigged, i have prodused the rigging ropeso i hope i get all this dunn soon😊 svein-erik
-
thanks for the coments and likes😊 working working....... i have carve out the bearding line and also make the keel/stem peases . the stem peases has to be reduse ,but i can do this later when it sitt propper on the backbone. the wood i used is black thorn and it soft/hard but it wil be coverd later with plating. my nex thing is to glue all toghether and then start to make some filler peases etc and also a beuilding board . t think this is going to be a fun projekt with no mistake.... LOL svein-erik
-
Hi the backbone is now nerly finish, yust need to cut out the slots. The backbone is made of 4 peases with taps. All the frames are cut out also ,the slots need to be cut out here also etc, I did resive the book I orderd a wile ago (us coast guard and revenue cutters by Donald L.Canney ) When all of the frames are finish its then time to dry fitt them all and start carving the bearding line and stem/keel pieces. Svein.erik
-
hi😊 am learning by doing.. so my question is how to determine the frame length from the drawings? svein erik
-
hi Ed, i do not have words..... its amazing build and its goimg to take me some time to read all of your build log. take care😊 svein.erik
-
Ok, am now underway 😲 am working on the templates for the frames, some plywood (6mm) has arived today ..more is coming. The backbone wil be in tree peases. There is alot to do before I cut out the frames ,but when thats dunn I wil post photo! Svein.erik
-
this is so grait to see, as a amature builder it grait to see how it dunn in photo , i have learnd so many things from your photos and gydings how to make it (items) and this make me want to do better and learn more . am not a good bilder as you ,but you make it so simpel to get to understand it ,and that hetps alot😊!! svein erik
- 1,784 replies
-
- 6
-
-
- winchelsea
- Syren Ship Model Company
- (and 1 more)
-
Ok. Am starting this log because I have deside to build this steam cutter , am still working on the plans , in 1:48 scale this ship vil be about 105 cm long and about 20 cm wide the hull wil be made of wood and planking , the orginal is steel but I wil use silver tape for the steel plating with nails. there wil also be alot of metal sheets to soldering . for now I orderd the book, us.coast guard and revenue cutters 1790-1935.by Donald L.Canney and orded som birchwood plywood for the frame (6mm) Here is the first photo of my big prodjekt Svein.erik
-
Hi am starting with chuck's cheerful, the boxwood version I wil use chuck's yellow cedar for this prodjekt and also use chuck spilling metod with lining off hull. am working on the frames and at this time is dry fittet. started also with the boxwood keel parts Svein.erik
-
Thanks everyone for the liks Still going strong here! dunn the rudder,well its on now and the rudder pendant also , I stole dubz ide for this, (sorry dubz) The stern ports lidt is on .... I do have another prodjekt to make, my dotter is Soon 15 years so in may se is going to have her confimation So se want me to make all the names for the famly party on glass. I made nr 1 of 30+ Svein.erik
-
Thanks for the liks everyone, am doing the headrails constructing and I made all the parts of boxvood. The top rails is not glued yet , I think I need to get dow inside there to make the small timbers. I think this is going to be a pain in the ***😲 its not like chuck's but its fine with me! here is the headrails constructing at this point. Svein.erik
-
OMG..😊 its a beauty, no mistake here.... maby i have to build more ships befor i do the winni?? i do like the binder clips ide because i dont like all the scrap wood to hold.(this i wil use ) svein.erik
- 1,784 replies
-
- 4
-
-
- winchelsea
- Syren Ship Model Company
- (and 1 more)
-
I final get the zaponlack on the hull plates, so I dont have to turn the model more😉 and I have to try one more time to see if the light on board work, yes it did 😊
-
LOL😂 chuck need to have more in the shop😲 Tanks for the comments and I learn new tings every day thanks to all the builders on this site😊 Svein.erik
-
Thanks for the liks, my last photo is a test rigging of the corronades! Svein.erik
-
wery nice buildt ☺ svein.erik
Our Emblem ®
