Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

king derelict

Members
 View Profile  See their activity

  • Posts

    2,959

  • Joined

  • Last visited

 Content Type 

Everything posted by king derelict

  1. king derelict
    Good timing on the fishing trip. It looks like being a dirty weekend of weather this week
  2. king derelict
    Craig Thanks for the comments. This is a much bigger project than Penelope but I'm enjoying immensely. I think there are parts top build either Geisenau or Scharnhorst in the box but I haven't worked out which bits will be left at the end. I think some of the secondary guns may be different calibre. I have some plastic barrels which are not used. Alan
  3. king derelict
    Thank you OC. That's very kind. I'm enjoying it a lot. The Hood is going to be really interesting. The kit should be here soon I think. I see it advertised as arriving at US stores soon. Alan
  4. king derelict
    Back in Tiny World today! With the wooden decks installed I built up some of the lower superstructure so I have a platform to add the details. There are also a lot of PE items like ladders that cross down onto the main decks and I think the railings are easier to fit and less susceptible to hanlding damage; we shall see. I fitted the inclined ladders from the derricks down to the main deck. I had trouble with the earlier inclined ladders that thread down through openings in the deck and this deck has the wooden layer too. It belatedly occurred to me that it would be simpler to thread the top of the ladder up from below and indeed it was. I see the railing at the intermediate landing needs a tweak in the morning. Lots more PE now around all the structures. Its going to start getting a bit delicate. I built the first of the boat racks seen below in progress. It is very fragile and i felt I had used up my breath control and fine motor skills for the day and left the second one for tomorrow. It does look nice though and in spite of the fiddly nature of the PE details I really enjoy working with it because I like the way the detail pops on the model. Thanks for looking Alan
  5. king derelict
    I always seem to get caught up in other stuff on Saturdays but I did manage to sneak off to the work table and start adding the wooden deck. The deck is by Flyhawk and is a very nice fit so far. I got the main decks installed and started on some of the minor pieces. The colour is quite subdued so I don't think I will weather it; it already has a slight grey to the colour and looks worn. It may be thin enough to be taking some colour from the grey plastic below it. Alan
  6. king derelict
    The later attempt at hull section #8 with a slower initial speed completed yesterday afternoon with a good result. The build supports can be seen in the photo and were easily removed. However the slicer elected to put a support right down the ridder post and fiddling with the angle at which a support is invoked failed to remove it so I let it print. It may prove interesting to remove but that's what drills are for if necessary. Today I was able to print the first part of the stern without any adjustments to the bed which confirms my private theory that smaller prints nearer the centre of the bed are less susceptible to levelling problems. The second part of the stern has begun, also without any adjustments prior to print and the first spool of filament is nearing its end. Three more large hull sections to complete but today has been almost restful as the printer works well within its abilities (and mine) Thanks to checking in Alan
  7. king derelict
    Thanks Yves, I was wondering bout temperature variability across the bed. I'm tending to let the bed soak in preheat for a while before starting a print to try to ensure an even temperature across the bed. I've ordered the flexible magnetic bed print surface as recommended by Craig Alan
  8. king derelict
    Thanks Yves I checked the stack files and it looks like the one on the right so I think I'm good Alan
  9. king derelict
    It looks great. Very natural weathering. What a recovery! I think its a required skill to be able to recover from the unexpected. Alan
  10. king derelict
    This morning the completed hull section #7 was waiting for me. I launched the print of hull section #8 and was disappointed to find that the level had shifted and the print at the front right corner was not sticking because the nozzle was too far from the bed. It took eight or nine attempts before a good looking start was achieved. Unfortunately after a couple of hours I noticed that the right side of the print was deformed and raised up from the bed. I could see light under the bowed section so it wasn't going to be rectified by a bit of putty so I stopped the print and restarted it with a slower initial speed. The support piece which was printing in the middle of the bed was perfect which confirms my thoughts that the level accuracy is more acute out at the edges of the bed. I haven't developed a theory on why the right side got deformed other than it looks like the brim was lifting from the bed and resulted in warping. The learning curve remains at quite a gradient. Alan
  11. king derelict
    Thanks Yves I will look at that. I feel like I shouldn't get leveling issues from one print to the next. There has to be some flex or freedom somewhere that can be locked down. Alan
  12. king derelict
    OC I completely agree with you. The enjoyment is seeing the model come together and feeling good about how it looks as each stage is worked on. This has been a bit overwhelming to start with just because its so big but I am enjoying taking each element and working on it and I really don't worry about when it will be completed. Its the journey and not the destination. I still get a big kick from seeing a nicely folded piece of PE installed and thinking how good it looks. As you say then it gets stuck in a display case and I'm finding it a challenge to find space for them. This build has taught me a lot about working on bigger models and I think I will be more confident with the Hood and Prince of Wales
  13. king derelict
    I think the ant died of boredom waiting for the print to finish. I missed the ant in the photos; we seem to be finding one or two a day at present. The hot and wet days I suppose. The pest guy sprayed and they are turning up dead now and hopefully will go away. Alan
  14. king derelict
    Thank you for the kind words of support OC. There have been a few moments when I have considered packing it all up and putting it in the back of the cupboard. I think I understand how to correct the bed when it is out of level but I still don't understand why it persists in going out of level. More research and trials ahead Alan
  15. king derelict
    Thank you OC. Sometimes it feels like I'm flailing around in this build without achieving much; there is just so much to this kit. Huge parts count, wooden decks, lots of PE and a real exercise in working out the build sequence. Anyway its supposed to be fun not a time and motion study. Alan
  16. king derelict
    Thanks Mark He has created similar works for Ligny and Quatre Bras on the same website. Well worth a look in an idle moment. Alan
  17. king derelict
    He lives in Bennos Figures Forum Benno's Figures Forum • Antietam 17th September 1862 (bennosfiguresforum.com) I hope its OK to provide the link Alan
  18. king derelict
    Progress continues but at the speed of printing. Adding the supports increased the build time so we are still working away on hull section 7. As you can see it will be a day and a half marathon when completed. The support structure for the prop tunnel finishes at the dotted line about halfway up and the tunnel itself is the upper section Thanks for looking Alan
  19. king derelict
    Thanks Ron I wanted to document the holes in the road that I fell into that Yves skills and research kept him out of. Ultimately I hope it will become a proper ships build log but I wanted to address how I got there and the effort and learning that it took. Alan
  20. king derelict
    Thanks Craig; I'll keep an eye on them I think the items you mention are probably areas where there is some compromise in a hobby machine and capable of improvement. Watching the vertical rod for run out it appears to be straight but I am learning that these machines are all about small errors. Also probably why you can spent $800 on a machine instead of $200 Alan
  21. king derelict
    Thanks Egilman I'm looking forward to hitting the plateau😄. Getting the hull sections done will be a huge milestone Alan
  22. king derelict
    Today was a monster grey spray day. The hull grey was sprayed (on the hull) and the superstructure modules and components got the light grey treatment and emptied my bottle of light grey. The masks were taken off and the hull and some structure is now ready for the wooden decks and then more detail and PE as they get built up. The fine detail and PE that Flyhawk puts in their models is starting so show nicely. Thanks for looking and have a great weekend Alan
  23. king derelict
    Thank you for the kind words OC. I'm using the Vallejo black primer. I have their grey too but I like the black with thin layers of the final coat it seems to give some shading and depth to the model. I air brush it undiluted or with a few drops of their thinner. It doesn't need much thinner at all. Alan
  24. king derelict
    Hi OC I expect you already know but there is a guy called Chris Dodson on a miniatures / war gaming forum who builds massive battle dioramas in 28mm I think (currently building Antietam. He has some interesting ideas for ground cover. May be worth a look. Alan
  25. king derelict
    Thank you for the kind words OC. I'm using the Vallejo black primer. I have their grey too but I like the black with thin layers of the final coat it seems to give some shading and depth to the model. I air brush it undiluted or with a few drops of their thinner. It doesn't need much thinner at all. Alan

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...