grsjax

Picked up this kit and it seems complete except there are no instructions. Tried to find a way to contact Constructo but no luck. Anybody have a set they would part with or a contact email for Constructo?

This article on the NRG website covers the subject. https://thenrg.org/resources/Documents/articles/APrimerOnPlanking.pdf

Depends on what you want to use it for. The vast majority of milling for model ships does not require a top of the line mill costing thousands of dollars.

More Vincenzo Lusci Plans HMS Aldabarn 1790 Cutter. 1 large sheet, was 2 sheets but the full size patterns have been cut out and are included. $5 + shipping. Norman Ship. 3 Large Sheets, was 4 sheets but the full size patterns have been cut out and are included. $5 + shipping. Sold

Plans by Vincezo Lusci 1. San Felipe 1690 Ship of the Line. Scale 1:100 6 large sheets and a full set of sails. Includes full size frame patterns. $50 + shipping. 2. Navire Royal Egyptien. 1 large sheet and a sail. $10 + shipping. Sold

She who must be obeyed has pointed out many times that I have so many kits and sets of plans that I will be well into my second century by time I finish them all. Finally had to admit she is right. Over time I will be posting several kits and plan sets for sale. I think I have set prices at a reasonable level but offers will be considered. Trades might be possible but I would really rather sell everything. Prices do not included shipping. If you don't see what you are looking for let me know and I will see what I have in that stash. Kits: All kits are 100% complete and in excellent condition 3. Panart Lynx $160 Plan Sets: 1. Sidewheel Steamer "James M. Donahue" 1875 Smithsonian plan # 16-41. 13 sheets (3 17x22, 10 17x35) 1/8" scale. Printed on heavy paper. $65 ($130 from Smithsonian) 2. Tern Schooner "William Bisbee" 1902 Smithsonian Plan # HAMMS 8-62. 3 sheets (1 17x22, 3 17x35) 3/16" scale. Printed on heavy paper. $15 3. Centerboard Schooner "Virginia" 1879 Smithsonian Plan # HAMMS 8-23 10 sheets (4 17x22, 6 17x35) 3/8" scale. Printed on heavy paper. $50

I believe the Dallas kit is based on the standard 51ton revenue cutter design. Howard Chapelle shows this design in one of this books.

Not sure if this is the right place for this. Has the current unpleasantness in Ukraine has an impact on the availability of these kits?

Check the sponsors listed on the right side of the home page of this site. Some good sources there.

A pointed bow is easier to plank. You might want to take a look at Model Shipways "Willie L. Bennet" Skipjack kit. A good introduction to building models of sailing vessels. Great instructions. Here is a link to a build log.

The only thing I ever read about him that might be controversial is that some of his reconstructions of design details were considered very speculative.

Another good series are the Richard Delancy novels by C. Northcote Parkinson. His other books are great reads as well.

Picked up a cheap Oral-B 500 toothbrush on ebay and made an oscillating detail sander from it. Pulled the bristles out of the head and glued a small piece of sandpaper on it. Tried it out on the hull of a model I am working on and it worked great. Produces a nice smooth surface. I am not going to trying using coarse sandpaper with it as I think it would be to aggressive. The head oscillates at a high rate.

They are all good. I found it best to read them in sequence. Although each novel is a complete story reading them in sequence makes them more understandable. Look at it not as 20 different books but one book 6000 pages long.

You have to start somewhere and this is a very cheap way to get into it. Enjoy the process with your kids and let them have the pleasure of seeing it come together. Next kit can be something more advanced.

Some of their larger kits can be bought in stages. I think the Bellona is only available as a complete kit at this time. The owner of CAF is on this forum so you could contact him and ask. Here is a build log for the CAF Bellona https://modelshipworld.com/topic/29729-hms-bellona-by-yves-vidal-caf-model-148/

The CAF model of Bellona is about as good as it gets for a kit. Expensive at $1500+ including shipping but CAF models are worth what they cost. Also very big at nearly 5ft long for the finished model. Going to need a dedicated space and set aside a few years for this one.

There is one on Amazon for $85.

Here is a spreadsheet with Midwest kits that are not on the current database. I will send it along to Adam Kit Name Vender ShipType Period Scale Material Length Beam Height Kit Type Skill San Francisco Bay Scow Schooner Midwest Schooner 19th Century 1:48 Wood 17" 4.375" 17.375" POB Advanced America's Cup Challenger Endeavour I Midwest Sloop 20th Century 1:64 Wood 24.625" 3.875" 34" POB Advanced Shrimp Dragger Midwest Fishing Boat 20th Century 1:16 Wood 22" 7.625" 14.25" POB Intermediate Trawler Midwest Fishing Boat 20th Century 1:27.4 Wood 25" 7.625" POB Intermediate 29' Bassboat Midwest Fishing Boat 20th Century 1:16 Wood 22" 7.625 POB Advanced Cheaspeake Double Kayak Midwest Kayak 20th Century 1:12 Wood 21" 2.5" 1.125" POF Beginner Harbor Master Midwest Tug 20th Century 1:24 Wood 19" 7.75" 12.75" POB Intermediate Fireboat Midwest Fireboat 20th Century 1:24 Wood 23" 7.25" POB Intermediate The Weatherly '62 America's Cup Winner Midwest Sloop 20th Century 1:24 Wood 35" 6" 48" POB Advanced Boothbay Lobster Boat Midwest Fishing Boat 20th Century 1:12 Wood 30" 10" POB AdvancedRC Tour Master Midwest Tour boat 20th Century 1:24 Wood 19" 7.75" 10" POB Intermediate Rainbow '34 America's Cup Winner Midwest Sloop 20th Century 1:64 Wood 24.625" 3.875" 34" POB Advanced

Came across some kits from Midwest that are not on the database. A level 3 kit of a San Francisco Bay Scow Schooner (1/4" = 1"), a level 4 kit of the 1934 America's Cup challenger Endeavour I (1:35 scale), 50' Harbor Tug (1/2" = 1'), Eastern Rigged Trawler (7/16" = 1'), Downeast Shrimp Dragger (3/4 = 1") and a 29' Bass Boat (3/4" = 1'). Found these in back issues of Ships in Scale. I believe a couple may be Laughing Whale designs. If anyone has back issues of model magazines or old catalogs I would be interesting in hearing about any other kits that may be in them.

I asked this question before but didn't get anything pointing me to more information. Still want to know, is there a list or archive of all the models produced by Laughing Whale and Midwest over the years. I remember catalogs from years ago that had a lot of models from these manufactures that no longer are available and no information about them anywhere. Sometimes I will run across an old ad or an ebay auction for one that I have never seen before. I know Bluejacket took over Laughing Whale but they only offer a small number of the old kits.

I agree that metric is easier to use but that said if you have a set of drawings in Imperial it is generally better to go with that rather than converting everything into metric. Digressing a bit, I had a 1970 Triumph 500 that had metric, SAE and Whitworth fastenings. Made for a real nightmare when trying to find the right wrench.

Thanks for the input. Turns out the post was on facebook and I just thought I had seen it here. The poster used an Oral B "cross action" toothbrush to make a little orbital sander. Going to have to see about trying that out.

The other day there was a thread on using an electric toothbrush as a sander. Can't seem to find it now. Can someone point me in the right direction?

The question is, does CAF still sell the kit. Another question is it a legitimate kit that can be here on MSW?