Jump to content
MSW Spring Donation Drive

moreplovac

Members
 View Profile  See their activity

  • Posts

    689

  • Joined

  • Last visited

 Content Type 

Everything posted by moreplovac

  1. moreplovac
    Thank you, much appreciated.
  2. moreplovac
    Thank you. I replaced tons of stuff in this model, was not fully satisfied with quality of some parts. Must admin that practicum was very useful and helped a lot particularly in adding some details that were not in the kit. Cheers
  3. moreplovac
    Thanks, i must admit i used plenty of photos from your build as a reference. Cheers
  4. moreplovac
    First layer of planking continues preparing two top planks by soaking them into water and twisted around jar lid and a glass. During mounting process one of the bulkheads snapped on me... .. so now it will be time to replace it with some spare parts.. Found one small piece of poplar from my Sultana build, shaped it roughly and installed on the ship. Planking process continues with that new bulkhead sticking out weirdly. Good thing this is just first planking layer... This kit has plenty of pins/nails that are very useful in planking process. I always used just simple nails or other pins but these nails has longer sharper top, so just small length of nail needs to go thru to keep a plank in place.. That is for today... there will be tons of shaping, scraping and usage of wood filler to make this hull as smooth as possible for second plank layer. Happy modelling.
  5. moreplovac
    Had a bit of a challenge assembling the first plank; the wood is fairly tick and even after some time dipped in the water, the twisting was a bit of a challenge. After some time and few extra helping hands was able to install it and leave it to dry. Hopefully it will not be causing issues in the future. Happy modelling.
  6. moreplovac
    Continuing with deck work... And ready for next step, just without the temporary part at the bow. Happy modelling.
  7. moreplovac
    This work from home thing is actually good when it comes to ship building.. My space to WFH is one desk and my shipyard is second desk with a common chair between... so it is just matter of turning around and work or work in shipyard.... Some parts needed a bit of shaping.. Glued... All bulwarks have been installed.. they fit perfectly with little or no sanding of laser burns. Making sure bulwarks are lined up correctly... Happy modelling and WFH...
  8. moreplovac
    Continue with bulkheads... and stern... Happy modelling.
  9. moreplovac
    I usually use carpenter' glue but will definitely try PVA.. Cheers
  10. moreplovac
    Not sure about you, but i have a tendency to break tiny parts very easily, during work on other ship parts. This happened to me while working on my Sultana. Not sure how many years of bad luck breaking some ship parts will bring you (like breaking a mirror) but not being in the mood to challenge it, i decided to protect a bow from being damaged.. two spare wood parts and a bit of scotch tape will do the trick. Waiting for further work.. The hull fairing was next.. hopefully i will not fairing more than needed. Some of the building logs suggesting that bulkheads should be sanded appr 1.5 mm so hull planks will not ended up short at the stern area.. I will get one or two planks and test fitting... Then, following instruction i glued part of the deck at the stern area.. Unfortunately some of the clamps used in process were clamping stronger causing deck to ended up bended in some area.. so the correction had to be made. With a help of acetone, i was able to remove deck from the hull.. Hull and deck have been cleaned, sanded and new assembly attempt was made... this time using rubber bands instead... Happy modelling.
  11. moreplovac
    That's awesome info. Much appreciated.
  12. moreplovac
    Friends, your opinions will be appreciated. This great kit contains a piece of decorative plywood simulating deck planking, ready to be assembled on the ship. I am kind of used to that all deck planking are made of straight planks, not as curved as on this sample. I am not familiar with bending methods during days when this real ship was built that will allow plank bending in the way they have represented here.. I am leaning towards more classical deck planking method where planks are all running straight (like in my Sultana model).... ..and where joggling the deck planking when they meet the margine planks... What is your opinion?
  13. moreplovac
    Nothing much to update.. keep gluing... the parts are very precise and easy to assembly... minor sanding is required.. Sometimes big guns are needed... Happy modeling.
  14. moreplovac
    Continue with bulkhead assembly.. Not sure how this part is called but D1L is going on 🙂, dry fit.. And gluing it all ... And yes, my ropes finally showed up with some on back-order as well.... Happy modeling..
  15. moreplovac
    Thanks.. certainly.. it is a 9.5cm in length and 2.5cm width.. Cheers
  16. moreplovac
    The rudder has been replaced.. the challenge was that there is no rudder schema available so i had to do a bit of research to come up with one that is close to the original as possible. I have used some left over wood and transfer rudder on it.. Rudder was cut and shaped and installed on the boat. I am not fully satisfied with its look but will leave it as is for now. Rudder was not glued, just slide in.. During process of mounting a new rudder, gudgeon snapped and replaced.. 10 rows were also completed... Since i am still waiting for a ropes to arrive, i put all completed parts aside. And the fun part started.. First i marked all parts based on kit diagram. I have used a HB pencil in case some of those marks needs to be erased later. Started with bulkhead, by removing them from the frame. The frame is strong so few different knifes are required to remove parts. Dry fit without any sanding shows that parts are very precise cut and easy to assemble... Sanding was applied to keel and all bulkheads just enough to remove excess laser cut burns.. All bulkheads were removed, sanded and dry fit... And the first bulkhead glued.. More to come.. Happy modeling.
  17. moreplovac
    Looking into rudder, it does look a bit weird; the gap appears to be too big between rudder and a boat.. Need to redo it a bit.. Unfortunately i was not able to locate any info about the rudder on kit plan..
  18. moreplovac
    The boat has been completed. Overall it is very nice product, easy to put together, the quality of parts are very good, the wood is also of a good quality. But, the parts are very fragile and prone to breakage. The keel and stern, rudder and some other parts are made of different wood type than rest of the boat. Did not pay to much attention at the beginning to paint those parts in matching color. This way the keel and stern are in different color. I dont like it and i might ended up making another one. Will see but the mental note will be: paint the wood in the color that will cover the laser burns because it is very difficult to remove those burns without breaking the part... Or paint the boat in some other color schema that might not be accurate representation of the period. Rudder completed... For rudder i started a bit different approach. First i mounted all pintles and gudgeon together, up and down and then i slide the rudder in. A bit of a glue was applied to gudgeons as well.. The eye bolt was added to stern and bow, as a detail; dont see it on the installation instruction.. The coat of satin varnish was applied to the whole boat, inside and out. And here it is... Then i started to work on rows... few extra parts were glued up and down on the row that will be rounded later... Again very tiny parts... must be careful 🙂 Happy modeling..
  19. moreplovac
    Gunwales fixed, rawlocks glued and all painted in flat black, ready for assembly.. In attempt to blackening the pin and rudder gudgeon, i left them in the blackening solvent, and forgot :-). Today they were all disintegrated... so new parts have to be made. i use a piece of copper wire, flattened it down and made a new parts.. Fitting testing on rudder Blackening, this time in controlled fashion 🙂 Glued to the boat... Another piece glued (sorry not sure what is the name of it)... The gunwales are mounted... And another view.. Happy modeling..
  20. moreplovac
    Continue with boat building... after a layer of danish oil covering all inside areas.. Using a file i sanded all edges on gunwales Rawlocks were removed, cleaned and glued to gunwale... during which process a gunwale snapped.. Work on rudder has started... by soldering pin ... Soldering helping hands.. Soldered... Dry testing.. Happy modeling..
  21. moreplovac
    Work continues with ship boat. All pieces are easy removed from the frames, a bit of a sanding and removing of laser burn is required. The front of a boat is done from three pieces, the same as other thwarts, mast, forward, center... Happy modeling.
  22. moreplovac
    All ribs are installed... Excess height was trimmed A layer of danish oil was applied, even dough i might have wait till all internal boat structures were mounted.. One of the ribs broke during jig removal phase so i had to fix it. You will see it at the top of the picture and after some trimming this is final result. Appears to be fixed fine.. Continue with work... The keel has to be trimmed a bit to accommodate the last piece... Not sure how to call this middle square box, but there are two of them, both need to be trimmed under the angle. So i try one before glue it and second after it was glued. Well no preferences, both will work just fine. With all these virus issues, i am working from home which brings back to me two hrs daily spent on driving... so extra hours for hobby... Happy modeling.
  23. moreplovac
    Yes, they are and this one is not exception. But it is very fragile...
  24. moreplovac
    Planking has been completed... ... some scrapping and sanding done to smooth the planks. Some of those ribs have been broken during the sanding process.. Now it is time to remove the jig from the boat... carefully breaking it.. And done, the jig was removed.. During the breaking process, one of the ribs, the last one broke. Even doung it will not be visible, need a fix. Out of the some cut piece, i made a replacement. Bit of sanding, filing, testing, fitting.... and all is good again.. Rest of the ribs were installed. First a short water bath, gentle twist and installation in the spot. There are some glue left particles that will be visible so i need to remove them once all ribs are in place. Happy modeling.
  25. moreplovac
    Nothing exciting to report. Planking was completed on the boat. A bit of a planking touch up is still needed, final touches with scraping and sanding... a layer of danish oil will be applied at the end... Happy modeling.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...