-
Posts
904 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by drtrap
-
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Me too Readbeard!! Thank you for stopping by! -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
This is a good question for now: what are you doing to protect your model from the dust, especially after you have glued the masts in the deck? -
That's a good choice Jason. It's a long trip doing the standing rigging. The masts are almost completed. Thanks
- 800 replies
-
- snake
- caldercraft
-
(and 1 more)
Tagged with:
-
Thanks again Jason. Well guys, I feel a bit confused with the manual on the yards assembly and attachments... I prefer to stay and wait to see your progress first, one way or another. In every case I've to deal with the placement of the lowermasts now. Cheers
- 800 replies
-
- snake
- caldercraft
-
(and 1 more)
Tagged with:
-
Hi Jason why did you drill holes in the mast to attach tle sling cleats? Did you expect a "appreciable" tension/load on them during next stages of rigging etc? Thanks.
- 800 replies
-
- snake
- caldercraft
-
(and 1 more)
Tagged with:
-
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Thank you Jim. Have you used the 1mm brass wire or usual planking nails (without head) for the pinning? Cheers. -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Hi guys how I've told you I'm two steps before the final placement of the lowermasts in the deck. At this stage I'd like to ask you: did you open in advance 1mm holes to connect (by pinning) the back side of the yards on the masts? If so, did you do it for the topmast and topgallant-mast yards too, in advance? Is it advisable to create those holes now or (because the respective rigging heights and distances on the masts differ sometimes) at a later (more mature) stage? Thank you all. Stergios -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
I have completed the shapping of all the yards of the model. Now I'm trying to understand the right way to fit and fix the yard's metals and accesories in place. The kit instructions provide little help for this.. My main plan is to accomplish the fitting of all the wooden parts (masts, yards, etc) and then procced to the final fixing of the masts, starting with the gluing of the lower 1/3's (lowermasts) on the deck. Thanks -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
...end for the rest of the yards material (rings, etc) didi you buy again extra aftermarket fittings? Thank you for your time to provide support on every issue, again... -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
-
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Cheers Jason, may I ask you, those structures in the middle of the yard, are custom/hand made by you (using 1x1 mm spare wood)? I cant' see what Jim has done for the same point.... -
White straps is a "safe" option Jim, but I'd prefer any other color to create a kind of contrast...
- 226 replies
-
- ballahoo
- caldercraft
-
(and 1 more)
Tagged with:
-
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Now, the result is excellent -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
I've sanded down for a second time those undesirable look-like mast-sections trying to restore a unique and smooth circumference in order to accept again a thin layer of water diluted walnut matt varnish. -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
I used the day before a lightly walnut-coloured varnish and today I've applied a layer of matt varnish without any sanding between the two steps. I dont like at all some spots of roughness. I sanded the dowel using paper No 400 before the initial varnish. -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
This is how it is supposed to be using walnut unpainted (but varnished) dowels. I've a tendency to follow this road... -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Hi Jason and thank you. I'm trying to read and follow your posts (as Jim's too) in advance. All I wanted was to make clear the starting point for the tappering. Thanks. -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
I think I've found the answer. I have to sand the dowel of the yard starting from the octagonal border of its centre (approx. 6mm) and going & tappering gradualy towards both free edges to reach a final diameter of 2,5 mm In case I'm wrong, please send me your notification.... -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
What proportion of each free end of the yard do you sand down to obtain the required tappering? The instruction comment for the last 1/3 of each half of the yard but I dont't feel to be in the safe side, that way.... I'm thinking to start sanding from the mark point (that is 40 mm away from the free edge of each 80 mm white 6mm dowel)... Thank you all. Cheers Stergios -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Thank you Jason, for the moment I've applied a kind of lightly walnut coloured varnish, and I'll see the day after the results.. -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
-
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
To tell the truth, I'm thinking again to change and paint in yellow ochre the topmast and topgallant mast... I see walnut dowels so..pale. Before my final decision I'll apply a layer of mat varnish, hoping to reach a more warm-like walnut appearance.... -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Thank you Jason I've tried to demonstrate the visual feeling of the difference (see post #510). It's a slight difference but I'd like to reduce that problem... That's a posterior view of the model -
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
-
HMS Snake by drtrap - Caldercraft
drtrap replied to drtrap's topic in - Kit build logs for subjects built from 1751 - 1800
Well, there is a slight inclination of the mainmast to the right or of the foremast to the left.... Any additional idea (except Jim's opinion to file the base of the dowel) to handle this "little" problem?
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.