modelshipwright Posted March 30, 2013 Author #61 Posted March 30, 2013 Thanks Geoff. It has been a bit of a challenge as the photos had to be dug out and reformatted and commentary added. It has brought back many fine memories of the build. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 30, 2013 Author #62 Posted March 30, 2013 Thanks Nat. Don't underestimate yourself. Scratch building components, even carvings, amounts to taking baby steps and having a clear goal with each step. As you will see, the carvings that will follow as I post this build will improve as I became more comfortable and learned from previous attempts. It is all about exploring ones potential and acting upon it. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #63 Posted March 31, 2013 It was at this point in my build that I was urged by my modeling friends and peers on the Web to write down my experience with carving in the form of a book and share it with other modelers. As there were limited resources available to instruct a modeler on carving sculptures, I considered the request and decided that it would be a way to give back to the hobby that had assisted me so much. My aim was to create a book that would be a tutorial on both 'in the round' and 'bas relief' carving utilizing rotary carving tools with dental burs. It had to be heavily illustrated with step by step photos. With a poll taken of potential buyers it was determined that it could produce sales of about 100 copies. It took 6 months to produce and get into print and the 100 copies sold immediately. It went through several reprints and a translation to French before it went digital. Thankfully over the years, it has been popular with modelers in over 20 countries and is still selling in digital PDF form on the internet. I sincerely hope that it provided the incentuive for others to attempt carving as there are so many beautiful ships adorned with sculptures that we can build if we have carving knowledge. For those interested, the web site is: http://carvingbook.weebly.com/ Thanks to Chuck and the site Moderators for allowing me to post this. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #64 Posted March 31, 2013 (edited) Next was the building of the cupolas over the stern galleries. After some due consideration, I decided to cut out the general shape of the cupolas from boxwood and carve the details on these pieces. The piece of boxwood with the shapes ready for the jig saw. The following photo shows the middle cupola with the pattern drawn on it and the initial carving started. The shapes were tear drop in form similar to the grating on the stern.. Four of the cupolas carved and ready to mount. Cupolas mounted on the port side. The Van de Velde sketch cupolas...... The Payne engraving cupolas............. At some time in the future lanterns will be mounted on the end cupolas and a sculpture on the top of the middle one. More to follow...................... Bill Edited March 31, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #65 Posted March 31, 2013 (edited) The end carving above the cupolas was similar to the first carving with CR on it with the addition of a window frame. The next photo shows the blank piece of boxwood with the drawing on it ready to carve. The carving in progress.... And the finished carving. More to follow........................ Bill Edited March 31, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
dvm27 Posted March 31, 2013 #66 Posted March 31, 2013 Lovely carvings, Bill, as always. It looks like some of the details are very small and thin in the final versions. Do you repair breakthroughs or is your scrap box rather hefty? Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
modelshipwright Posted March 31, 2013 Author #67 Posted March 31, 2013 (edited) Hi Greg, The scrap box spilleth over as they say. If any of the smaller parts broke off, I glued them back together. There are several examples of this on the ship. All of this build to date was done some years ago and I have to pinch myself to remember all the details as I repost it. Regards, Bill Edited March 31, 2013 by modelshipwright Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #68 Posted March 31, 2013 (edited) The middle carving on the port side was just as ornate and contained the initials HM for Henrietta Maria, the Queen of Spain who was Charles I wife. The HM are on top of each other . Carving in progress in the next three photos. And mounted on the ship with the other two. The ornamentation on the port gallery as seen on the Payne engraving. More to follow.................... Bill Edited March 31, 2013 by modelshipwright Mirabell61 and garym 2 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #69 Posted March 31, 2013 (edited) I will now return to the final stages of the stern lantern showing the progress of carving the cupola. The cupola in progress... Tiny balls carved from the solid in rows with the beginnings of the arched window frames.. The 'in progress' carving mounted on top of the lantern. The finished state of the stern at this point in the build with the lantern finally in place. The lantern as seen on the Payne engraving. The Lantern on the Lely portrait. More to follow.................... Bill Edited March 31, 2013 by modelshipwright garym and Mirabell61 2 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #70 Posted March 31, 2013 (edited) The next carving was a Coat of Arms that is situated on the gallery amongst mythical creatures. A delicate little carving indeed. The Coat of arms in progress and temporarily mounted on the gallery. The finished Coat of Arms. More to follow....................... Bill Edited March 31, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #71 Posted March 31, 2013 (edited) Next I took a break from carving and constructed the poop deck rail on the port side out of Boxwood and Swiss Pear. Another shot showing the railing and the Coat of Arms carving finished and in place on the model. More to follow.................. Bill Edited March 31, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted March 31, 2013 Author #72 Posted March 31, 2013 (edited) Not to neglect the starboard side, I was also carving reverse image carvings of the CR and HM carvings for that area. The two reverse image carvings side by side. The first CR carving in place on the starboard gallery. The starboard side HM carving in progress. It was right about then that Greg Herbert contacted me and made me aware of a booklet that he had come across called Ship Models which was essentially a guide to the ship model exhibition in the Museum of Fine Arts Boston. In that booklet was a photo of a painting of the Soveraigne, England 1737, painting on vellum by Peter Pett; ca, 1637 signed by Sir Phineas Pett, and built by his son, Peter, at Woolich in 1637. The sculptures shown on this depiction of The Sovereign were entirely different than the Payne engraving and the Van de Velde sketch. A dilemma indeed. After consulting with Lars Bruzelius at the University of Upsala, he noted that there was a reference in States Papers where indeed, Peter Pett had presented a painting to King Charles I for approval and Charles had asked for changes to the ornamentation on the gallery area, those changes which are reflected in the Payne and Van de Velde drawings. ************************************************************* States Papers Domestic Vol. 350, No 70 [PRO] "Alsoe the three figures in the upper strakes to be altered into a badge of Carved worke answerable to the other strake that runneth faire with it, and to be guilt answerable to the rest." ************************************************************* It can then perhaps be said that this representation of the Starboard side was "as presented" to Charles I for approval by Peter Pett, and the Payne engraving and the Van de Velde sketch were "as built". Now I had a big decision to make as I was tempted to change the starboard side and follow the painting on vellum attributed to Peter Pett. The Peter Pett painting at the Museum of Fine Arts Boston. The gallery section up close showing remarkably different Cupolas. More to folllow................................... Bill Edited March 31, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
pirozzi Posted March 31, 2013 #73 Posted March 31, 2013 While I would love to build my SOS like this, it would take a true artist to make carvings as you have. That type and level of talent is not something the average modeller like me would have. It is certainly great to see work of this caliber. You are very lucky to have such talent. Vince P. Quote
WackoWolf Posted March 31, 2013 #74 Posted March 31, 2013 Bill, Your work is out of this world. I always look for your log. Just Beautiful, keep the pictures coming I know there is a lot of us watching. Quote Wacko Joe Go MSW :)
GTM Posted April 1, 2013 #75 Posted April 1, 2013 Just looked at your SOS and must say: incredible, just unbelievable fine and realistic detail. You are truly an great artist, and you discovered your talent just by starting to carve ornaments for the SOS ? Thanks for sharing your experience at least it encourages me to give it a try myself when the time is near Quote Best wishes, Theo Current Project: Santisima Trinidad -> Build log Finished Projects: Smit Rotterdam -> Gallery
modelshipwright Posted April 1, 2013 Author #76 Posted April 1, 2013 Thanks Vince and Wackowolf. I appreciate your comments and support. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted April 1, 2013 Author #77 Posted April 1, 2013 (edited) Thanks Theo. I guess I have always had an appreciation for the arts and have tried to draw ever since I was a young boy. When I decided to build the Sovereign to contemporary standards and abandoned the Mantua-Sergal kit it thrust me into the world of drawing and carving. It was a challenge and I rather enjoyed that part of it. When you think about it, I am actually copying the details from the contemporary paintings and drawings, or rather it is "minds eye modeling" for want of a better description. I basically am trying to use proportion to realize the correct size of things and my minds eye to try and duplicate what these amazing artists left behind for us to see. As I have no plans to follow, it is the only way left for me to create sculptures and decorations for my model. My model is a representation of what looks right to me when I view it. Regards, Bill Edited April 1, 2013 by modelshipwright Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted April 1, 2013 Author #78 Posted April 1, 2013 (edited) The discovery of the starboard view of the Sovereign stopped me in my tracks. It was an opportunity to either continue to duplicate the port side sculptures on the starboard side or to scrap the starboard carvings and start afresh with a view to representing the starboard side "as presented to Charles I by Peter Pett". On the old MSW site, I started a poll of the members to see what they thought and after a couple of weeks the verdict was 60% to build it "as presented" and 40% for "as built". This rather confirmed what I was strongly leaning towards and I decided to scrap the carvings and start over on the port side. The first area I tackled were the cupolas. I thought there might be a chance of modifying them to suit and so I started the process. A reminder of what the cupolas were hopefully going to look like. The first small cupola under revision.... The same cupola further along in the process.. The middle cupola under way....... Two of the three modified..... Two of them in place on the gallery....... More to folow............... Edited April 1, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted April 1, 2013 Author #79 Posted April 1, 2013 (edited) The next carving was a small cherub that was to stand in between the cupolas. A carving in the round that involved a pair of wings as well. The Cherub in progress.......... The cherub in place between the cupolas..... It might be interesting to add that at the time MSW1 crashed, the poll numbers reversed to 60% against changing the starboard side to 40% in favour. By then I had taken the leap and there was no turning back. More to follow................. Bill Edited April 3, 2013 by modelshipwright garym 1 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted April 2, 2013 Author #80 Posted April 2, 2013 (edited) The first carving above the cupolas is a lady in a robe with a shield at her feet. The carving in the rough.... Further progress on the robed lady.... The shield area nearing completion..... Tools used to carve the lady included the dental drill and several ball end burs, small chisels and carving tools, a #10 xacto blade and a green Scotch-brite pad. More to folow.................... Edited April 2, 2013 by modelshipwright garym, druxey and Mirabell61 3 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
johannesludo5 Posted April 2, 2013 #81 Posted April 2, 2013 HI SIR VERY NICE WORK AMAZING THANKS JOHN Quote
modelshipwright Posted April 2, 2013 Author #82 Posted April 2, 2013 HI SIR VERY NICE WORK AMAZING THANKS JOHN Thanks for your comments John, Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
modelshipwright Posted April 2, 2013 Author #83 Posted April 2, 2013 (edited) The next carving was of a lion with a shield that sits on the edge of the rail on the port side of the stern. This photo shows the rough outline of this carving in the round shown against the Lely portrait version. The start of the carving........ A more refined carving is taking shape........ The finished carving mounted on the stern rail. In order to carve the tiny detail of the less than 1 mm thick tail, I used a pair of dental loupes shown in the next photo. They are at 2.5X magnification and allow me to work at about 13" from the work. More to follow........ Regards, Bill Edited April 2, 2013 by modelshipwright Mirabell61, janos and garym 3 Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
wthilgen Posted April 2, 2013 #84 Posted April 2, 2013 I am at a loss of words to express the quality and the extent of your attention to detail of your build. When I view upon it, I am complete in Awwwwwwwwwww. Mirabell61 1 Quote Current Build: La Nina, Latina - Wood / 1:65 On The Shelf: San Francisco II, Latina - Wood 1/90, U.S.S. Constitution, Revell - Plastic / 1:96 (Remake), H.M.S. Bounty, Latina - Wood / 1:48, H.M.S. /Mayflower, Latina - Wood / 1:64, La Pinta, Latina, Latina - Wood / 1:65, La Santa Maria, Latina - Wood / 1:65, Completed: San Francisco / Cross Section, Latina - Wood / 1:50, Coastal Submarine, Revell - Plastic / 1:144, Cutty Sark Wall Plaque, Revell - Plastic / 1:50, H.M.S. Victory, Revell - Plastic / 1:146, H.M.S. Bounty, Constructo - Wood / 1:50, Oseberg, Billings Boats - Wood / 1:25, Clipper Ship (Sea Witch), Unknown - Wood / 1:46, U.S.S. Constitution, Revell - Plastic / 1:96, Man Of War, Scientific - Wood / 1:50, Robert E. Lee, Scientific - Wood / 1:45, PT-109, Revell - Plastic / 1:72, U.S.S. Enterprise, Revell - Plastic / 1:720, R.M.S. Titanic, Revell - Plastic / 1:720, Numerous other wooded tall ships and boats from companies named: Ideal, Dumas, Pyro.
modelshipwright Posted April 2, 2013 Author #85 Posted April 2, 2013 Thanks Bill for your kind comments. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
Børge Posted April 2, 2013 #86 Posted April 2, 2013 Amazing details Bill, your making a masterpiece.... Stunning Børge Quote Current build(restore, bashing)BB582 "Dragen" Scale 1:12 On hold: BB534 Bolougne Etaples Scale 1:20Not started: Model Shipways MS2040 USS Constitution 1:76
modelshipwright Posted April 2, 2013 Author #87 Posted April 2, 2013 Thanks for looking in on my build Borge. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
Mecheleir Posted April 2, 2013 #88 Posted April 2, 2013 Thank u very much for reposting ur magical build... Its amazing, Marc. Quote
modelshipwright Posted April 3, 2013 Author #89 Posted April 3, 2013 My pleasure Marc. Regards, Bill Quote Mediocrity will never do. You are capable of something better.” ― Gordon B. Hinckley Current build: Sovereign of the Seas 1637 My Book: Carving Ornamentation for Ship Models Website: Http://carvingbook.weebly.com/
lamarvalley Posted April 3, 2013 #90 Posted April 3, 2013 Wow! The detail of that ship is just amazing. I have carved some in my life but nothing compared to the work you're doing on the Sovereign. It is quite impressive. Incredible patience too! Randy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.