Jump to content

Home made stains from vinegar and steel wool?!?


Recommended Posts

Not bogus. It is simple chemistry. My thought is that the vinegar's are pretty acidic so what does it do in the long run on the wood. Will it eat it away, will it fade and how much?

Current Built: Zeehaen 1639, Dutch Fluit from Dutch explorer Abel J. Tasman

 

Unofficial motto of the VOC: "God is good, but trade is better"

 

Many people believe that Captain J. Cook discovered Australia in 1770. They tend to forget that Dutch mariner Willem Janszoon landed on Australia’s northern coast in 1606. Cook never even sighted the coast of Western Australia).

Link to comment
Share on other sites

I've used this on wooden model RR structures and it hasn't affected the wood. I do recommend that you test the stains on a scrap of the same wood you want to stain. You can also use India inks in denatured alcohol (found in pharmacies or chemist shops) for stains.

Ken

Started: MS Bounty Longboat,

On Hold:  Heinkel USS Choctaw paper

Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1

Scratchbuild: Echo Cross Section

 

Member Nautical Research Guild

Link to comment
Share on other sites

Some  old muzzleloading firearms were stained with a mixture of nitric acid and iron. I have used it and it gives a very nice color. It affects different hardness of wood differently so the grain really stands out. One caveat  it MUST be neutralized with something like a baking soda slurry or the stain will continue to darken. Also nitric acid is dangerous when the iron is put in it gets hot. I have one pistol I made about 25 years ago and there is no deterioration of the wood although it has darkened over the years. I guess I didn't let the baking soda sit long enough.

 

Mark

Current build               Dom Fernando II E Gloria  crossection 

 

Finished boats               Portuguese Caravel     Artenaval

                                  Yacht Mary                 Mamoli

                                  Mayflower                  M.S.

                                  H.M.S. Unicorn           Corel

                                  Whaleboat                 Marine Model Co.

                                  Swift                         A.L.

                                  America (solid hull)      Marine Model Co.

                                  Albatros                     Mantua

                                  U.S.S. Constitution      Revell

                                  Spanish Galleon           Revell

 

 

 

Link to comment
Share on other sites

When you neutralized the nitric acid with sodium bicarbonate, the

reaction would have been essentially instantaneous. The result

would have been sodium nitrate ( CO2 and H2O).  If the continued

darkening was due to what you are guessing, it would just mean that

you did not use enough bicarb.  The probability is that you used a

surplus of bicarb and if anything, you stain was slightly basic.

My guess would be that oxygen is involved with the change.

If the iron was a large piece, There would be none of it in the wood

even if what you used was acidic.  Wood is a complex combination

of organic compounds, some of which will oxidize to darker compounds

over time.

NRG member 50 years

 

Current:  

NMS

HMS Ajax 1767 - 74-gun 3rd rate - 1:192 POF exploration - works but too intense -no margin for error

HMS Centurion 1732 - 60-gun 4th rate - POF Navall Timber framing

HMS Beagle 1831 refiit  10-gun brig with a small mizzen - POF Navall (ish) Timber framing

The U.S. Ex. Ex. 1838-1842
Flying Fish 1838  pilot schooner - POF framed - ready for stern timbers
Porpose II  1836  brigantine/brig - POF framed - ready for hawse and stern timbers
Vincennes  1825  Sloop-of-War  - POF timbers assembled, need shaping
Peacock  1828  Sloop-of -War  - POF timbers ready for assembly
Sea Gull  1838  pilot schooner - POF timbers ready for assembly
Relief  1835 packet hull USN ship - POF timbers ready for assembly

Other

Portsmouth  1843  Sloop-of-War  - POF timbers ready for assembly
Le Commerce de Marseilles  1788   118 cannons - POF framed

La Renommee 1744 Frigate - POF framed - ready for hawse and stern timbers

 

Link to comment
Share on other sites

Any iron, nails, old chain links, screws, will rust in the vinegar it doesn't have to be steel wool. I first used a similar set up to age wood.  First paint the wood with brewed tea, that adds tannic acid to the surface.  Then paint it with the rusty vinegar.  The wood turned a nice gray.  I also saw a friend paint walnut with the rusty vinegar, without the tea, and it looked like a fine ebony.  Try it, it's just vinegar.

 

Bob

Edited by Cap'n'Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

My question would be why, when you can have any color under the rainbow and have them be safe and stable long term by mixing alcohol-based aniline dyes? Best part is they're not pigment based, the color is molecular, so they don't occlude the underlying wood at all unless you go really dark If Gibson uses these every day to stain $4k Les Pauls in a thousand colors, it should be a good choice for ship modelers. 

 

I'm new to ships but not making things, example of the trust I put in them was a so-called luthier ruined the neck on my 1994 Strat by stripping the truss rod, so I made a replacement neck and had to match the 20 year old yellowed Fender clear.

 

 

post-9338-0-97471100-1485747727_thumb.jpg

 

 

I also think they're very easy to use, best thing is to mix at 50% or 33% intended color so you can control better by putting a few coats on, and you also control color by how long you wait before wiping. With alcohol-based you can do coats about every two minutes since it dries immediately.

 

 

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

If you use an acid, such as cooking-grade flavoured vinegar, the coloured compounds will be probably some iron-organic acid complex. If you filter this, there will be no particles. You should end up with a dye. However, big chemical companies can control processes much better and I would also go for commercial dyes. At the amount we need them, the cost will not kill you.

 

Incidentally, the (cast-)iron guns of old were 'browned' by repeatedly wetting them with vinegar. Finally, the rust and iron-organic compounds were solidified by applying lineseed-oil. Kind of in situ oil-paint production.

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Link to comment
Share on other sites

  • 3 weeks later...

Hello Les here. Heres my two cents worth. Sorry Canada doesn't have pennies any more. So one tooney. I used to watch a PBS show called the Furniture Guys. Great stuff and very comedic. They used to make their own wood dyes by soaking chains, and any other piece of metallic junk they could find in water and anything else they could come up with. Interesting as entertainment but a waste of time in my opinion. Go to any good paint store and they will have a great selection of water based stains. Just apply and finish. Controllable and predictable. No alchemy required.

Link to comment
Share on other sites

  • 2 weeks later...

Hi,

 

I've been using this on the bowls and platters that I turn on a lathe for many years. Wire wool is not essential, any rusty iron will do. I personally use white vinegar. Like Captainbob explained, wiping the surface of the wood with tea (soggy teabags work too!) will make the end result darker as does applying several coats of the iron/ vinegar mix.  I find this process most effective when used on oak because of it's natural tannin content. I believe that the 'ebonising' effect is due to the chemical reaction between the tannin and the acid in the vinegar. Once dry any wood finish can be applied. I like this technique because of the penetration that can be achieved compared with paints etc. that just sit on the surface.

 

Cheers,

 

Graham.

Link to comment
Share on other sites

  • 4 weeks later...

Some photographic detail ……..

 

Driving past the old work place the other day I decided to drop in to catch up with colleagues and pick up a few more of my own bits and pieces – tools etc.  Sitting at the back of a shelf in a workshop cupboard was a jar of the vinegar/ rusty iron ‘brew’ so I thought I’d produce a test piece to show the effect of the ebonising stain on wood.

 

IMG_5807.jpg.940aa09af386d62cefe9e74f8d88de68.jpg

The vinegar and rusty iron mix ready for use.

 

The oak sample was divided into three, the first left natural, the third area was pre-soaked with cold tea to increase the tannin content, and once this had dried the second and third areas were both coated with the ebonising fluid. Initially nothing seems to be happening but over the next hour or so the effect became more pronounced.

Once the wood had dried half the sample was coated with matt varnish which further enhances the effect.

 

IMG_5808.jpg.780b4fc1324d4bebaed50a772c87762f.jpg

 

 

As oak is not often an ideal wood for modelling purposes, this is what happened when the fluid was applied to a walnut off-cut from my Caldercraft Victory. As walnut has a lower tannin content than oak pre-soaking in tea is beneficial.

 

IMG_5809.jpg.67460c00f973d07173f772ca01da1af0.jpg

 

 

I hope this is of some interest, any task that begins with brewing tea has a lot going for it, almost as good as a cold beer once a task is completed!

 

Cheers,

 

Graham.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...