luponero Posted January 5, 2019 #61 Posted January 5, 2019 very good, every day better !!! Old Collingwood and Oliver24 2 Quote Lupo nero _______________________________________ finished models : Carrack Santa Maria by luponero - scale 1/50 - diagrams of Adametz https://modelshipworld.com/topic/19739-carrack-santa-maria-by-luponero-scale-150-diagrams-of-adametz-finished/ models under construction : Athenian triere of the 5th century B.C https://modelshipworld.com/topic/25956-athenian-triere-of-the-5th-century-bc/ San Giovanni Battista 1598 by luponero - Medicean galleon https://modelshipworld.com/topic/25930-san-giovanni-battista-1598-by-luponero-medicean-galleon/
nikbud Posted January 6, 2019 #62 Posted January 6, 2019 Hi Oliver, Nice build so far. I am sure others will correct me if I am wrong but I think that you have built up the anchors wrongly. The wooden stock should be perpendicular to the flukes, rather than parallel as you have built them. Hope this helps, good luck! Oliver24 1 Quote Completed Build --- Virginia 1819 - Artesania Latina Other Models --- German Armor plus others Mastermind Current Build --- Liveship Vivacia
Oliver24 Posted January 13, 2019 Author #63 Posted January 13, 2019 Preparing the masts and some rigging: nikbud and Old Collingwood 2 Quote
Oliver24 Posted January 13, 2019 Author #64 Posted January 13, 2019 On 1/6/2019 at 1:10 PM, nikbud said: Hi Oliver, Nice build so far. I am sure others will correct me if I am wrong but I think that you have built up the anchors wrongly. The wooden stock should be perpendicular to the flukes, rather than parallel as you have built them. Hope this helps, good luck! That it quite right! I have noticed the mistake and will correct them. Thank you for your input! nikbud and Old Collingwood 2 Quote
Oliver24 Posted January 18, 2019 Author #65 Posted January 18, 2019 Guys I need your help again. I do not know how to link the two blocks in the pictures. One of them is on the mast the other is on the yard. The instructions are telling me that they must be linked somehow with a line in order to further put it throw them in the small holes. How can I link them?? Old Collingwood 1 Quote
Oliver24 Posted January 19, 2019 Author #66 Posted January 19, 2019 Any ideas how to link the lines? Quote
Old Collingwood Posted January 19, 2019 #67 Posted January 19, 2019 20 minutes ago, Oliver24 said: Any ideas how to link the lines? If you mean joining the two blocks in your first diagram with the letter A, I think you need to widen the gap between them then wind some thread round and through them like in the diagram. OC. Oliver24 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Oliver24 Posted January 19, 2019 Author #68 Posted January 19, 2019 Indeed, my question is how can I link the line which leads from the upper block through the middle of the lower block in diagram A. Old Collingwood 1 Quote
Oliver24 Posted January 19, 2019 Author #69 Posted January 19, 2019 Every block has a line around them, like a shroud. But how do I link the two blocks? Old Collingwood 1 Quote
nikbud Posted January 19, 2019 #70 Posted January 19, 2019 Oliver, you need to wrap another line around the block that is attached to the mast, just like you have done already. The other end of this new line goes down, through the block attached to the yard, back up, through the block attached to the mast, and then down to the belaying pin. Hope that helped. Old Collingwood and Oliver24 2 Quote Completed Build --- Virginia 1819 - Artesania Latina Other Models --- German Armor plus others Mastermind Current Build --- Liveship Vivacia
Oliver24 Posted January 20, 2019 Author #71 Posted January 20, 2019 (edited) nicbud, thank you so much!! So I must actually wrap two lines around the block attached to the mast! Thank you very much🙏 Edited January 20, 2019 by Oliver24 Old Collingwood 1 Quote
Oliver24 Posted January 25, 2019 Author #72 Posted January 25, 2019 A have made a little progress. I have attached the boat and the necessary rigging to it. Also, I have attached the fences. It was a tricky process due to the fact that I have introduced a 0,7 mm wire in them in order to ensure better stability. I used some wood glue also, of course. Old Collingwood, JpR62, luponero and 2 others 5 Quote
Oliver24 Posted February 3, 2019 Author #73 Posted February 3, 2019 Some progress made with the masts. Does anybody know how to rig this? Old Collingwood and JpR62 2 Quote
Old Collingwood Posted February 3, 2019 #74 Posted February 3, 2019 Realy nice work. OC. Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Oliver24 Posted February 9, 2019 Author #75 Posted February 9, 2019 Another picture of my progress. Although plenty of mistakes were made, I am truly happy with the results till now: ccoyle, Old Collingwood and GrandpaPhil 3 Quote
Old Collingwood Posted February 9, 2019 #76 Posted February 9, 2019 Very nice work. OC. Oliver24 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1
Oliver24 Posted February 10, 2019 Author #77 Posted February 10, 2019 Thank you Old Collingwood! My work approaches to finish... Old Collingwood 1 Quote
nikbud Posted February 10, 2019 #78 Posted February 10, 2019 She is looking good! Old Collingwood and Oliver24 2 Quote Completed Build --- Virginia 1819 - Artesania Latina Other Models --- German Armor plus others Mastermind Current Build --- Liveship Vivacia
Oliver24 Posted February 21, 2019 Author #79 Posted February 21, 2019 Some new pictures about my work on the Santa Maria. Things are going well and I learn something new every time I spend time with it. zappto, Old Collingwood, kier and 5 others 8 Quote
Chuck Posted June 19, 2020 #80 Posted June 19, 2020 Any progress!!! Lapinas 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.