Jump to content

Recommended Posts

Posted

 I am using a wet pallet to put my pants in while I paint.  I am noticing that every time I paid with my brown Vallejo paint it starts to separate and gets a yellow oily substance on top.  This never happens with the black paint or the black primer that I use. Has anybody else experienced this ,or am I doing something wrong?

524F564E-9C90-45A6-954E-C02882CA3C33.jpeg

5E2975A7-0F80-4EFD-9EAC-7DCC8F7B7849.jpeg

Posted

Does it separate if you don't use a wet pallet?  Try putting it on some wax paper instead.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Posted

You're basically running a mass spectroscopy test of the paints with that "palette" arrangement. I'd be more surprised at an acrylic hobby paint that didn't separate. That said, I've seen Vallejo paints act weird with any solvent other than their "high compatibility" solvent, that only really works with their paints. 

Posted

I'm not really familiar with Vallejo, but I've worked professionally on ink and paint formulations as a chemist.  Vossiewulf's correct, although it isn't actually mass spectroscopy the thought is correct.  It's actually chromatography - a chemist technique for separating out chemicals and was used early in the 20th century by forensic chemists to separate out inks into their individual dye components using essentially a solvent wicking up a sheet of paper.   Then using the results to identify the ink/pen.

 

It sounds like the paper towel and solvent is actually acting to separate the paint into its components.  There is numerous ways to make a brown hue.  One is by mixing red and green (or blue and yellow to make the green or adjust the color brown) pigments or dyes.  I agree with Mark about the wax paper, it should help.  There are drying retarders that can be used to slow acrylic paints.  However, acrylic is just fast drying, especially if it is being diluted by water.  I don't know what you are painting, but if you need a slow drying paint, oils are an excellent option.  Just never use turps to dilute the oil, use one of the oils.  Diluting with terps will actually separate out the pigments from the oil and can cause chalking and other issues.

 

Best, 

marc

Posted (edited)

If waxed paper does not work - I have found soy sauce flat-ish  micro dipping bowels in an Asian food market in various sizes that may work.  Not expensive. Works if your community has an East Asian population that is large enough to support a market.

Edited by Jaager

NRG member 50 years

 

Current:  

NMS

HMS Ajax 1767 - 74-gun 3rd rate - 1:192 POF exploration - works but too intense -no margin for error

HMS Centurion 1732 - 60-gun 4th rate - POF Navall Timber framing

HMS Beagle 1831 refiit  10-gun brig with a small mizzen - POF Navall (ish) Timber framing

The U.S. Ex. Ex. 1838-1842
Flying Fish 1838  pilot schooner - POF framed - ready for stern timbers
Porpose II  1836  brigantine/brig - POF framed - ready for hawse and stern timbers
Vincennes  1825  Sloop-of-War  - POF timbers assembled, need shaping
Peacock  1828  Sloop-of -War  - POF timbers ready for assembly
Sea Gull  1838  pilot schooner - POF timbers ready for assembly
Relief  1835 packet hull USN ship - POF timbers ready for assembly

Other

Portsmouth  1843  Sloop-of-War  - POF timbers ready for assembly
Le Commerce de Marseilles  1788   118 cannons - POF framed

La Renommee 1744 Frigate - POF framed - ready for hawse and stern timbers

 

Posted

Hi Vossy, 

you can actually get primaries and secondaries as single pigments as well. black (black often has blue toner added to keep the carbon black from being a little on the red (brown) side.  For example, you can get several single pigment brown pigments made from different oxidation states of Iron as a single pigment.  These range from almost red through a deep brown (Can you tell I love pigments and dyes?)😊

 

Antonio, I'm sure that the wax and plastic versions will help.

best!!

Marc

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...