S.Coleman Posted April 26, 2020 Author Share #31 Posted April 26, 2020 At this point of time i have measuered 7 full planks down to the wales. Under the wales I've planned the first spilled plank. As per Chris picture post. Got it marked out on the hull and test bent some planks to see the lie of them. At this stage no clinkering out so could be on a winner? We shall see.. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 26, 2020 Author Share #32 Posted April 26, 2020 Strips are way to damn thin! I knew it would be difficult but not this bad. Sorry guys but it might take some time to get right. Try and update soon. cheers to the guys who chipped in. Obviously something I didn’t know before was the hull can be planked two ways. I’ve gone with the replica version. All your feedback is appreciated. Thanks. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Cabbie Posted April 27, 2020 Share #33 Posted April 27, 2020 Yo Scott put up a photo or 2 showing the planks and what you are trying to to do. Even thin strips can be edge glued together to make wider ones if needed, depending on how many you have. Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence Link to comment Share on other sites More sharing options...
S.Coleman Posted April 27, 2020 Author Share #34 Posted April 27, 2020 The first few planks laid down. The slightest curve and the top edge wants to kick out. Using drawing pins to clamp planks down so I have no holes. It’s tedious work but I think I’m winning. What do you think? Look ok? hof00, Ron Burns, GrandpaPhil and 2 others 5 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 27, 2020 Author Share #35 Posted April 27, 2020 Sorry photos taken off my tablet and are not the best Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Cabbie Posted April 27, 2020 Share #36 Posted April 27, 2020 Looks very good to me, no gaps, as long as you keep the planks tight to the ship should be ok. I use contact glue a lot for my planking, goes and stays on, but you have to be right first time. Thicker strips take a lot more work to go around the bow. Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence Link to comment Share on other sites More sharing options...
S.Coleman Posted April 27, 2020 Author Share #37 Posted April 27, 2020 1 hour ago, Cabbie said: Looks very good to me, no gaps, as long as you keep the planks tight to the ship should be ok. I use contact glue a lot for my planking, goes and stays on, but you have to be right first time. Thicker strips take a lot more work to go around the bow. I'll be honest, I used a little bit just to hold the plank until the tightbond PVA took hold. 😁 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted April 28, 2020 Author Share #38 Posted April 28, 2020 Time for another update. Better pic quality this time. Continuing on down the sides with last layer. Coming to the tricky part now. Hope you all like so far. Henke, KurtH, Jeff-E and 2 others 5 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
clearway Posted April 30, 2020 Share #39 Posted April 30, 2020 don't forget they put a coat of deal planking on top of the original hull strakes to combat ship worm along with crushed glass and white lead- they have most likely recreated that hence the run of the planking looking wrong. Quote Link to comment Share on other sites More sharing options...
S.Coleman Posted May 4, 2020 Author Share #40 Posted May 4, 2020 Don't worry guys. Im still building. Slowly getting it done. I've gone down the path of the planks termination at the stem. Actualy working out great. Mapping each plank for fitting and the lie of it. Checking and re checking. Richard44, Jeff-E, Henke and 4 others 7 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 4, 2020 Share #41 Posted May 4, 2020 Looking very neat , Scott, keep it up Cabbie 1 Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
S.Coleman Posted May 4, 2020 Author Share #42 Posted May 4, 2020 32 minutes ago, Jeff-E said: Looking very neat , Scott, keep it up Thank you very much. Glad you like it. Cabbie 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 4, 2020 Author Share #43 Posted May 4, 2020 I want to paint the hull an off white colour with the yellow orcre bands on the top. But we'll wait and see how my planking job turns out. I might just want the wood colour yet. Im affraid the exposed unpainted section of wood will be too dark. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 15, 2020 Author Share #44 Posted May 15, 2020 Hey all. Some more work has been done and progress is good. Finished planking the hull below the wales and added the stem post, keel and about to add the stern post. One rubbing strake has yet to be added about two plank rows above the wales. This whole thing needs a good sand very carefully because the veneer strips are only 1mm thick. Some touch ups to do but im pleased with it so far. Hope you enjoy. Richard44, Ron Burns, chris watton and 2 others 5 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Cabbie Posted May 15, 2020 Share #45 Posted May 15, 2020 Looking very nice and neat Scott, doesn't look like there were any problems shaping the planks Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence Link to comment Share on other sites More sharing options...
S.Coleman Posted May 15, 2020 Author Share #46 Posted May 15, 2020 46 minutes ago, Cabbie said: Looking very nice and neat Scott, doesn't look like there were any problems shaping the planks Cheers mate. Well, No it dosnt look like it surprisingly but trust me about 14 different languages were spoken during the course of it. Alan180529 and Cabbie 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 16, 2020 Share #47 Posted May 16, 2020 Very neat planking job Scott, those thin planks can be awkward to get them to lay as you would like them to. Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
S.Coleman Posted May 16, 2020 Author Share #48 Posted May 16, 2020 5 hours ago, Jeff-E said: Very neat planking job Scott, those thin planks can be awkward to get them to lay as you would like them to. Thank you very much. Your not wrong. I like big thick planks, also gives you some wiggle room when it comes to sanding afterwards. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 16, 2020 Author Share #49 Posted May 16, 2020 Update time. The counter planked up and the waist rubbing strakes on. Next up is the gunwales and so on. Pleased how its turned out so far Jeff-E and GrandpaPhil 2 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 17, 2020 Author Share #50 Posted May 17, 2020 Stern windows this time! The kit supplys you with the unsightly metal cast windows which i defiantly wont be using. So instead om making my own out of 1mm×1mm stock and then make my own glass for them. clearway, GrandpaPhil, uncarina and 1 other 4 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 18, 2020 Share #51 Posted May 18, 2020 Very nicely done Scott, a big improvement on the supplied ones. Will be watching to see how the glass turns out. Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
S.Coleman Posted May 18, 2020 Author Share #52 Posted May 18, 2020 The glass came out really nice i think. Nice little bit of scratch building. uncarina, GrandpaPhil and Jeff-E 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 18, 2020 Author Share #53 Posted May 18, 2020 Finaly got some colour on to her. Happy with the result so far. Henke, Jeff-E and GrandpaPhil 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 18, 2020 Share #54 Posted May 18, 2020 The glass turned out really well, I will definitely order some. The painting looks great too! Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
S.Coleman Posted May 18, 2020 Author Share #55 Posted May 18, 2020 2 minutes ago, Jeff-E said: The glass turned out really well, I will definitely order some. The painting looks great too! Cheers. Yes it works great. Takes a while to dry but it is worth it. A few touch ups on the paint and it should look good. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Cabbie Posted May 18, 2020 Share #56 Posted May 18, 2020 Very nice indeed Scott the color gives her a big lift and the planking came up very neat. Glass looks real in the 2nd pic. Chris Quote HM Cutter Mermaid 1817 HMB Endeavour 1768 by Cabbie - Artesania Latina - 1:60 - Kit Fiddle Every action has a consequence Link to comment Share on other sites More sharing options...
S.Coleman Posted May 18, 2020 Author Share #57 Posted May 18, 2020 Stern assembly time. The ornaments on top came in the form of a slab of metal. Painted the recessed areas blue then applied brass paint on the protruding areas. Im happy with the outcome. Strips above and below windows added as well. GrandpaPhil 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 19, 2020 Author Share #58 Posted May 19, 2020 Okay so... More gastly chunks of metal. I decided to drill out the material where the glass should be and add my own glass. Trying to jazz them up abit. From photos the deadlights are red and I decided to include them. Might just have to go a touch darker red on them but we'll see. GrandpaPhil 1 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
S.Coleman Posted May 19, 2020 Author Share #59 Posted May 19, 2020 I think it looks good. Or is the window on too much of a slant? GrandpaPhil, Jeff-E and hof00 3 Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
Jeff-E Posted May 20, 2020 Share #60 Posted May 20, 2020 Great job on the side windows, big improvement on the blobs supplied. The window looks OK to me the centre frame is following the line of the rubbing strake. clearway and Cabbie 2 Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.