Doc James Posted February 4, 2021 #1 Posted February 4, 2021 I have problems with streaks of ca residue between the mahogany hull planking of my Amati endeavour. I thought I’d been relatively light handed with it but after sanding there are unsightly thin white streaks between planks. I’d hoped that I’d finish her with the mahogany varnished but wouldn’t be happy as she looks currently. Does anyone know whether this excess ca residue can be removed without lifting the planks? Might they be less visible when varnished? james Quote
Gregory Posted February 4, 2021 #2 Posted February 4, 2021 Have you tried wiping with acetone? You might need to put some cloth on a thin blade of some sort, saturate it with acetone and wipe between the planks. Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon
TBlack Posted February 4, 2021 #3 Posted February 4, 2021 I find that the white streaks will disappear with varnish or dull coat. Tom mtaylor and Canute 2 Quote
Doc James Posted February 4, 2021 Author #4 Posted February 4, 2021 Thank you both. I’ll certainly try the acetone on a test strip first. mtaylor and Canute 2 Quote
Gregory Posted February 4, 2021 #5 Posted February 4, 2021 Just a note, it may take several swipes with the acetone. The cured CA is essentially plastic, and the acetone dissolves it. mtaylor and Canute 2 Quote “Indecision may or may not be my problem.” ― Jimmy Buffett Current builds: Rattlesnake On Hold: HMS Resolution ( AKA Ferrett ) In the Gallery: Yacht Mary, Gretel, French Cannon
kurtvd19 Posted February 4, 2021 #6 Posted February 4, 2021 4 hours ago, Doc James said: Does anyone know whether this excess ca residue can be removed without lifting the planks? Master modeler Steve Wheeler used thin C/A on bare wood and never worried about the C/A marks as he applied Floquil's F110015 Flat Finish Matte (the jar is also marked as enamel) as an over spray and the C/A marks disappear completely. Steve showed before and after photographs in several articles he wrote for both Ships in Scale magazine and the nautical Research journal. He only ever used this particular product and it is no longer made but any petroleum based clear should work - acrylics were tested and don't work. The marks were made with thin C/A and no build up of C/A - the thin soaked in completely. I saw his work under construction with all the glue marks and after so I have seen the proof first hand. I have the testing of other flat finishes over C/A glue on my list of things to do - but I think it is something that somebody should look into. druxey, BobG and Canute 3 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
TBlack Posted February 5, 2021 #7 Posted February 5, 2021 I use Testors dullcote which provides a flat finish and will take care of your problem. Tom Canute and mtaylor 2 Quote
Doc James Posted February 5, 2021 Author #8 Posted February 5, 2021 Thank you all. Its a wonderful resource being able to tap the minds of modellers around the world! James mtaylor 1 Quote
LyleK1 Posted August 17, 2021 #9 Posted August 17, 2021 Just to add... Shellac will cover the wood and hide the CA glue completely. I used it recently on a build that used CA glue exclusively. You cannot tell once the Shellac is applied: mtaylor, Landlubber Mike and Canute 3 Quote Lyle "The only thing that stays the same is the constant state of change" Completed Builds: Occre HMS Terror - https://modelshipworld.com/gallery/album/2065-hms-terror-occre/ NRG Half Hull Project - https://modelshipworld.com/topic/23546-half-hull-project-by-lylek1-nrg/ 1:130 1847 Harvey - https://modelshipworld.com/gallery/album/2125-1847-baltimore-clipper-harvey-1130-scale/ Scott Miller's Sea of Galilee Boat - https://modelshipworld.com/topic/29007-sea-of-galilee-boat-by-se-miller-120-scale-lylek1/ In progress: Artesania Latina HMS Bounty - https://modelshipworld.com/topic/26817-hms-bounty-by-lylek1-artesania-latina-148-scale/ Waiting for dry-dock space: Model Shipways - USS Constitution Master Korbel - Cannon Jolle 1801 A Scratch build -TBD
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.