Jump to content

"Ferris" Troop Ship c. 1918-1919 by Harvey Golden - US Shipping Board Design #1001


Recommended Posts

Hello all! First build log here.  This is a type that was built in several yards around my hometown Portland, Oregon (among other places around the U.S.).  They were built in wood 'round these parts, and came in single- and twin-screw versions, each being 281'6" long. I'll be building a single-screw version. I've actually been aboard one of these, though I didn't know it at the time.  There's one embedded at the lower end of an Island on the Columbia River, and I used to visit it fairly often via kayak. I always wondered what it used to be, and with the ruler tool on Google Earth, it's measurements (LxW) are pretty darned close to a Ferris ship's. . . not that I recommend measuring ships from outer space.  Here's some pics of the derelict:

1188893473_ferriscat1.jpg.22f31bc04c98e0eeca3a6f957cde2535.jpg

Bow of the ship, at the downriver end of Caterpillar Island, due West of Vancouver, WA.

1096507463_ferriscat2.jpg.0b16912c8892584daa1d8ea69919ebfb.jpg

Two survivors still aboard, at the bow.

1017311866_ferriscat3.jpg.0e2aec16ae4495e09c2a8f4c2e14dda6.jpg

The rudder, cocked to port, and the rudder post, and screw aperture and stuffing box(?)

20168622_FerrisWreck.jpg.8382312b43480e71c7eb4379bf084bf2.jpg

And here she is, courtesy of Google Earth.

 

My source for the build will primarily be Richard M. Van Gaasbeek's 1918 "A Practical Course in Wooden Boat and Ship Building."  The book has complete lines (though rendered rather tiny) as well as offsets, profiles, and detailed deck plans. Many of the photographs are from Peninsula Shipbuilding Co., just 10 miles from the site of this wreck.   Here's some sample pages from the book that show the Ferris type in better condition: 

 

PeninsulaSB.jpeg.b84cd6f5360834c25c0c382b346498ba.jpeg

 

Lastly, here is an exceptional image of a completed one (S.S. Calala) on the Willamette just below Forest Park.  Image is Public Domain, courtesy Oregon Historical Society. 

ssCalala1918.jpg.3856a786bdcaaa5a19c420eeff98801e.jpg

 

The model will be strip-planked on bulkhead at 1/16"=1'.  Here's where I am today:

IMG_1964.jpeg.4ab5a03dc63ed338f9d0e314df168508.jpeg

 

 

InboardProfile.jpg

Link to comment
Share on other sites

Harvey, There were a few built up my way( Willapa Bay ) and in Grays harbor as well.  Will follow your build as I have a interest in steam ships.

 

Zipper hydroplane(Miss Mabel ) finished

John Cudahy  Scratch build 1/4" scale Steam Tug

1914 Steam Tug Scratch build from HAMMS plans

1820 Pinky  "Eagle" Scratch build from; American Ships Their Plans and History

Link to comment
Share on other sites

Moulds are all set up, and are fair.  I'll use solid pieces for the stem and fantail, so the planking will be from stn. 2 to 22.  Station spacing is a little quaint at 13'(!)  I'll drop in a few more moulds amidships in due course. Nothing fancy here-- just pine scraps milled to a touch above 1/16" thick by random widths around 1/8" or so.  

IMG_1969.jpeg.cebd2cf9cbd924f9991dd955d0a0aa07.jpegIMG_1968.jpeg.82c496c9efe8d595ffd26b1d26193296.jpeg

 

Here's a close-up of the forward moulds-- mirrored via. photo editing, and scaled on MS. Word.  No scanner here, so just took the image with my phone camera. From here, I just print 'em off, cut 'em out, and glue 'em to plywood.  They are ground to the lines on a bench sander. 

623803746_FerrisFore.jpg.98b91406f9ec472e49d58db7ed02fddb.jpg

 

Link to comment
Share on other sites

Planking the hull.  A rough job, for sure, but after puttying, it'll sand out nicely.  Before I turned the bilge with planks, I removed the strong- back.  Last photos show the solid block ends in place, and rough-ground to shape.  I work a little 'backwards,' in that the stem, deadwood and keel will be added after the planking. 

IMG_1976.jpeg.4a2ff7f2ded855a0235cc2fea0149148.jpegIMG_1974.jpeg.ba2fdf9188d2b8aa7ce75dc4272981dc.jpeg

IMG_1979.jpeg.e246836ed850b8cbe025f53895a3d0b3.jpeg

IMG_1980.jpeg.c89455139bd980d8da57c41f1745ab61.jpeg

 

 

Link to comment
Share on other sites

It's always nice to have a drawing the same size as the model one is building.  With the rough hull I ended up with, it's especially handy, as I need to get the 'castles' and bulwarks built up correctly.  Here is the heights lofting, made from tables of offsets. Van Gaasbeek includes complete elevations, but they are greatly reduced, and some of the numbers are rendered illegible. Still very helpful though, as it provides many details the offsets do not have. 

IMG_1984.jpeg.8ba98da333ead67951d78bd889d8d9ef.jpeg

Elevations in Van Gaasbeek: (The dashed lines in the stern view are for the twin-screw version).  Note the 13' station distances, and the commission of 4 identical center stations. 

IMG_1985.jpeg.0b3c132f35ccd65e00f744fbf95ed0fd.jpeg

 

Link to comment
Share on other sites

  • 2 weeks later...

Nice start Harvey

 

Some time ago I bought the Lindberg "Q" ship with the idea of using it much the same way and taking the lines from the plastic model and build a bigger model from it.

U-Boat-hunting WW1 Freighter: Lindberg (Round-2) 1/390 'Q-Ship' - Ready for  Inspection - Maritime - Britmodeller.com

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

2 hours ago, lmagna said:

Nice start Harvey

 

Some time ago I bought the Lindberg "Q" ship with the idea of using it much the same way and taking the lines from the plastic model and build a bigger model from it.

Thank you.  That's a lovely job there!  I usually build small craft or later freighter types, so this is my first vessel with ratlines.  Your model's ratlines look very nicely done.

Link to comment
Share on other sites

2 hours ago, Harvey Golden said:

Your model's ratlines look very nicely done.

Sorry for the misunderstanding Harvey. The picture is not my build. My Lindberg kit is still in the box. I just posted an internet picture of a built Lindberg Q ship model to show what the kit looked like built. It is a pretty small model but looks very similar to yours. 

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

10 hours ago, lmagna said:

Sorry for the misunderstanding Harvey. The picture is not my build. My Lindberg kit is still in the box. I just posted an internet picture of a built Lindberg Q ship model to show what the kit looked like built. It is a pretty small model but looks very similar to yours. 

Ah-- no matter.  I appreciate the photo, as it sent me down the rabbit hole on Q-ships (and Lindberg models). Thank you!  

Link to comment
Share on other sites

Coming along . . . I'll be putting LEDs in this model, so two white all 'rounds, red and green side lights, cabin lights, and probably a red wheelhouse light. Takes a lot of advance planning to do this, and entails having annoying wires sticking out for most of the process. (LEDs from Evan Design-- a sponsor on the MSW sidebar). 

IMG_2093.jpeg.2459259d02979c3942332f07521cd689.jpeg

IMG_2094.jpeg.f8eb0bc924ee26551585004ccae35ce5.jpeg

 

A peek into the hold reveals a substantial number of 70-inch non-explosive artillery shells . . . or is that just ballast for the model? 😉

IMG_2091.jpeg.5030bf18aaf46c3c19157f00fd6a173b.jpeg

Link to comment
Share on other sites

I think I like 70-inch non-explosive artillery shells better!:D Looking more and more like a cargo ship!

Edited by lmagna

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

Getting a little color on the hull, and some of the deck furnishings. The scheme is based on the USS Banago, ID3810 (http://www.navsource.org/archives/12/173810.htm).  I prefer the scheme of the Calala, depicted in my first post, but I haven't been able to find a depiction of it's opposite side. The fittings are a mix of scratch-built and Bluejacket. 

IMG_2096.jpeg.0960b71fbb9548ae8464e52a1959d305.jpeg

IMG_2097.jpeg.d9c1ecf94a3e037587e4d49c29a25a46.jpeg

Link to comment
Share on other sites

3 hours ago, Jim Lad said:

Harvey, might I suggest that you go back over the bow and try a little more sanding there.  A smoother hull will result in a far better finished model.

Thanks Jim. It sure could use more sanding. I think part of the problem I've been having is the hardness difference between the pine and the fillers I'm using.  Also, the filler seems to shrink a bit with drying, so it often takes several fills. 

Best, 

Harvey

Link to comment
Share on other sites

21 minutes ago, Harvey Golden said:

Quite the festive barge at this stage.

Looks like fireworks!:D

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

  • 2 weeks later...

A little more progress: Bridge deck and boat deck are in place. The screw showed up, so the rudder post is in place with the screw aperture refined. One photo shows how the light from the LEDs is diffused inside the deck houses:  The LEDs are dropped down white-painted plastic straws. The last three 'midships lights are the port and starboard running lights and a red wheelhouse light.

IMG_2208.jpeg.647d7bc81ab0419b34da96507c8a99c2.jpegIMG_2206.jpeg.0411273674c0d1d284085113a0550192.jpegIMG_2207.jpeg.384c8b0544f093303a4955917310165c.jpeg

Link to comment
Share on other sites

Using inexpensive straws as diffusers is pretty good. I will have to file that one away for possible future use.

 

You are really coming along nicely with your build. Makes me think of pulling down my Q-Ship down from the shelf and doing  it as well. 

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

On 3/18/2021 at 7:14 PM, Harvey Golden said:

Electrical systems check.  More details in place, and more detailing needed.  Quite the festive barge at this stage. . .  

IMG_2120.jpeg.e9cea089add26a6400b11abfc481b1a7.jpeg

And naturally I've long since broken off the tail end of the keel . . . 

IMG_2121.jpeg.caeb2ba9febdfb7cee81bd15562b17f2.jpeg

And I thought that the holiday season was well over? How wrong was I?

A perfectionist may dislike the exterior hull with all the creases and unevenness, but to my eye that looks quite perfect. It looks like the ship has been in commission for quite some time and that the hull has been painted and repainted due to wear and tear. Great look actually!

Keep it up!

Happy modelling!

Håkan

__________________________________________

 

Current build: Atlantica by Wintergreen

Previous builds

Kågen by Wintergreen

Regina by Wintergreen

Sea of Galilee boat, first century, sort of...

Billing Boats Wasa

Gallery:

Kågen (Cog, kaeg) by Wintergreen - 1:30Billing Boats Regina - 1:30Billing Boats Dana

Link to comment
Share on other sites

A bit more progress lately.  Also, here's some little details that might be of interest . . . Book-cloth for lifeboat covers and grommet punches to make life rings.  I've also used these punches to make portholes when using heavy paper for cabin walls-- they leave a nice raised ring on the opposite side (I used grommets and plywood for the walls on this model). 

IMG_2212.jpeg.98d21537776622f02becc452f84c9a0e.jpeg

IMG_2213.jpeg.215c09c6fd0c126379961e7fe4781ad0.jpeg

IMG_2214.jpeg.b088d75675de728ec125af311e840375.jpeg

1918 was a very good year for cowl ventilator salesmen . . . 

Link to comment
Share on other sites

It is almost a shame to see most of the lighting installed Harvey. She really looked like the Forth of July for a while. Now she just looks like they are shooting off flairs!:D I really do like the Ugly Duckling looks of these ships.

Lou

 

Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence

Currant builds:

Constructo Brigantine Sentinel (Union) (On hold)

Minicraft 1/350 Titanic (For the Admiral)

1/350 Heavy Cruiser USS Houston (Resin)

Currant research/scratchbuild:

Schooner USS Lanikai/Hermes

Non ship build log:

1/35th UH-1H Huey

 

Link to comment
Share on other sites

  • 2 weeks later...

Stays in place and ratlines in progress. Chainplates in place (made of paper with glue 'bolt-heads').  A couple errors fixed, such as the height of the forward rifle platform. Many more details ahead and clean-up here and there. I do believe I'll be making a rudder in the not-too-distant future.  Oh-- a crew was scrounged up, as well! (Trumpeter 1/200). 

IMG_2277.jpeg.3cd6aaf47276de064105ed306fbd4f37.jpegIMG_2275.jpeg.1a0727fcdfc56f471514c1337eb28654.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...