Gct86 Posted September 30, 2021 Share #1 Posted September 30, 2021 I'm afraid... AJohnson, ccoyle and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
DaveBaxt Posted September 30, 2021 Share #2 Posted September 30, 2021 Don,t be I managed to build it and it was my first period ship I built. There are a few blogs out there of this one which have been completed. There is also a few videos out there to help you along but I found out were inaccurate in quite a few ways but a big help to me personally . Good luck with the build and hope you achieve your goals. Best regards Dave Gct86, AJohnson and MarkGru 3 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Baker Posted September 30, 2021 Share #3 Posted September 30, 2021 1 hour ago, Gct86 said: I'm afraid... Dont, just go for it DaveBaxt, AJohnson and Gct86 2 1 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Gct86 Posted September 30, 2021 Author Share #4 Posted September 30, 2021 Waiting for start, I've cutted a piece of wood of bounty deck shape to bending planks. Amati have a similar tool in stock. It should work DaveBaxt, CiscoH, GrandpaPhil and 3 others 6 Quote Link to comment Share on other sites More sharing options...
GrandpaPhil Posted October 1, 2021 Share #5 Posted October 1, 2021 (edited) Looking forward to seeing this build! Edited October 1, 2021 by GrandpaPhil AJohnson and Gct86 2 Quote Building: 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships) Link to comment Share on other sites More sharing options...
Gct86 Posted October 1, 2021 Author Share #6 Posted October 1, 2021 Amati kit has several mistake. Istruction tell me to glue a 4x4 millimeters (sorry I'm european😂) plank for keel, but other keel components and falsekeel are 5x5 🤔 I check all the joints and I hope to glue without mistakes. AOTS hms bounty helps me with some details (I can t reach perfection, but I will improve a little my model) See you soon GrandpaPhil, Baker and AJohnson 3 Quote Link to comment Share on other sites More sharing options...
allanyed Posted October 1, 2021 Share #7 Posted October 1, 2021 GCT86 Interesting screen name as it is the name of a color of a nail polish made by Odontorium. Regarding the thicknesses of 4mm and 5mm, maybe it has to do with the necessary tapering of the knee of the head both fore and aft as well as vertically. Your model scale is 1:60 so 4mm is about 9.5 inches full scale. The stem and knee of the head assembly, if it is 5mm, makes sense, as it tapers from top to bottom to match the keel and from the stem to the fore side of the knee of the head to about 6 inches (3mm at scale) There is actually a lot more to it but this taper is not always explained in kits even though it is an important feature. Allan Gct86 and AJohnson 2 Quote PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU Link to comment Share on other sites More sharing options...
DaveBaxt Posted October 2, 2021 Share #8 Posted October 2, 2021 (edited) If I can remember the difference between the sizes 5mm and 4 mm is the second planking 2 x 0.5 mm. If you follow the videos above this is how I solved the problem by planking either side of the keel with 0.5mm second planking. Also I think you need to check that the holes in the deck,as they do not line up with the bulkheads . This is also mentioned in the videos. L also mentioned it in my blog of this build . However this may not be the case with your kit. Although the videos are innaccurate build for that period ( mainly the rigging) I found it very helpful and was the main reason I choose this build (Amati) over other manufacturers, was because of the 16 videos.There is lots of help from guys on here so you should be covered if needs arise Hope this helps and good luck.Best regards Dave Edited October 2, 2021 by DaveBaxt Gct86, AJohnson and CaptnBirdseye 3 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Gct86 Posted October 2, 2021 Author Share #9 Posted October 2, 2021 Thank you Dave! Many times I watch your videos on youtube! Your bounty is amazing and you channel is an inspiration. I try to learn somethings from videos and forum, but for me is very fun to think so much about problems and founding solutions myself. For example I have discarted filling block on stern. Probably I was wrong, but I want to see what happen. AJohnson 1 Quote Link to comment Share on other sites More sharing options...
DaveBaxt Posted October 2, 2021 Share #10 Posted October 2, 2021 1 minute ago, Gct86 said: Thank you Dave! Many times I watch your videos on youtube! Your bounty is amazing and you channel is an inspiration. I try to learn somethings from videos and forum, but for me is very fun to think so much about problems and founding solutions myself. For example I have discarted filling block on stern. Probably I was wrong, but I want to see what happen. They are not my Videos .A different Dave. Gct86 and AJohnson 2 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Gct86 Posted October 2, 2021 Author Share #11 Posted October 2, 2021 Ahaha sorry Thank you by the way Quote Link to comment Share on other sites More sharing options...
Gct86 Posted October 4, 2021 Author Share #12 Posted October 4, 2021 I'm trying to make bow filling block, but I don't know if I'm right. Any advise? Thanks Gregory, AJohnson, Baker and 3 others 5 1 Quote Link to comment Share on other sites More sharing options...
Baker Posted October 6, 2021 Share #13 Posted October 6, 2021 (edited) On 10/4/2021 at 6:15 PM, Gct86 said: but I don't know if I'm right In my opinion not. The filler blocks seem to come more forward Check out the Bounty build of DaveBaxt . Edited October 6, 2021 by Backer Gct86, DaveBaxt and AJohnson 3 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
DaveBaxt Posted October 6, 2021 Share #14 Posted October 6, 2021 (edited) I think you have the idea ,however follow the curve of the deck with the blocks at the top and continue to follow the line using a spare plank. I f I were to do it again I think I would either fit blocks just forward of when the planks first start to bend or fit another bulkhead I always find when there is a hollow in the planks in this area and therefore I ended up having to use some filler,I don,t think the 1.5 mm x 6 mm walnut planks helped. I ended up soaking them overnight to make sure they would bend ok. I tried to follow Chucks method of edge bending the planks which also helped and tapered each plank. You can find Chucks method here on this forum.Hope this helps .Best regards Dave Edited October 6, 2021 by DaveBaxt Baker, AJohnson and Gct86 3 Quote Completed St Canute Billings Dec 2020 Completed HMS Bounty Amati May 2021 Finished Currently building HM Bark Endeavour Link to comment Share on other sites More sharing options...
Gct86 Posted October 6, 2021 Author Share #15 Posted October 6, 2021 (edited) Thank you. Actually I have to sandpaper a lot because there is a "belly" too big in the center of filler blocks. Using a 0,5mm strip I'm trying to understand the correct curve of hull.🤞 Edited October 6, 2021 by Gct86 Baker, DaveBaxt and AJohnson 3 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted October 6, 2021 Author Share #16 Posted October 6, 2021 For example: Here seems almost correct: Here not (must sandpaper a Little bit): AJohnson, GrandpaPhil, Baker and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Baker Posted October 6, 2021 Share #17 Posted October 6, 2021 Looks much better already Gct86 and AJohnson 2 Quote Regards, Patrick Finished : Soleil Royal Heller 1/100 Wasa Billing Boats Bounty Revell 1/110 plastic (semi scratch) Pelican / Golden Hind 1/45 scratch Current build : Mary Rose 1/50 scratch große-jacht / Yacht D'Oro 1/50 Corel Gallery : Revell Bounty Pelican/Golden hind 1/45 scratch Shore leave, non ship models build logs : ADGZ M35 funkwagen 1/72 Einhets Pkw. Kfz.2 and 4 1/72 Autoblinda AB40 1/72 122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72 10.5cm Howitzer 16 on Mark. VI(e) Centurion Mk.1 conversion M29 Weasel 1/72 SAM6 1/72 T26 Finland T26 TN 1/72 Autoprotetto S37 1/72 Opel Blitz buses 1/72 Boxer and MAN trucks 1/72 Hetzer38(t) Starr 1/72 Cleaning the 1/72 military collection Si vis pacem, para bellum Link to comment Share on other sites More sharing options...
Gct86 Posted October 7, 2021 Author Share #18 Posted October 7, 2021 Meantime I've completed (excluding hatches) deck planking and caulking. For my Bounty I though a "worn out" finish, post-mutiny period. So I've putty planking whith black milliput. Milliput is very hard to apply, but I like the result. GrandpaPhil, AJohnson and Baker 3 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted October 8, 2021 Author Share #19 Posted October 8, 2021 Bulwark in progress... Baker, GrandpaPhil and AJohnson 3 Quote Link to comment Share on other sites More sharing options...
HarveyR Posted October 10, 2021 Share #20 Posted October 10, 2021 Anybody find diagram and instruction sheets in English? If possible, reply to my email: HARUBEN@aol.com. Thank you an awful lot. Quote Link to comment Share on other sites More sharing options...
Gct86 Posted October 10, 2021 Author Share #21 Posted October 10, 2021 I've started first planking GrandpaPhil, Baker and AJohnson 3 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted October 25, 2021 Author Share #22 Posted October 25, 2021 First planking complete. I must sandpaper, but I hope this is a good first planking. AJohnson, Baker and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted November 7, 2021 Author Share #23 Posted November 7, 2021 Hello construction updates second planking copper shield hull aging GrandpaPhil, Baker and AJohnson 3 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted November 7, 2021 Author Share #24 Posted November 7, 2021 AJohnson and GrandpaPhil 2 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted November 8, 2021 Author Share #25 Posted November 8, 2021 Rudder AJohnson, Baker and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
Gct86 Posted November 11, 2021 Author Share #26 Posted November 11, 2021 Details ccoyle, Baker, GrandpaPhil and 1 other 4 Quote Link to comment Share on other sites More sharing options...
AJohnson Posted November 11, 2021 Share #27 Posted November 11, 2021 Just come across this log and really happy to see another Bounty under construction. You are making great progress Gct86! 👍 I really like the copper weathering effect you have done, I tried similar on my Bounty using white vinegar and salt, but I see you have used a commercial product, what was it like to work with? Gct86 1 Quote Andrew Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) , HMAV Bounty - Caldercraft (1/64) Completed (Kits):- Vanguard Models (1/64) :- HM Cutter Trial , Nisha - Brixham trawler Caldercraft (1/64) :- HMS Orestes(Mars), HM Cutter Sherbourne Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight Link to comment Share on other sites More sharing options...
Gct86 Posted November 11, 2021 Author Share #28 Posted November 11, 2021 hello and thanks for your comments! I wanted to build a dystopian bounty, in a world where the ship had not been burned by the mutineers and held in Pitcairn Bay for a long time. so I coated the keel with copper and used the AK burnisher, quick brush strokes. the copper was stained with cyanoacrylate glue so it was easy to create a smudge effect. then I drybrush some acrylic color mixed by myself to give copper oxidation. with a drop of glue cyanoacrylate then I glued some paper tissue painted in green, black and brown to simulate algae a little, but without exaggerating! I'm glad you like it See you soon! Baker and AJohnson 2 Quote Link to comment Share on other sites More sharing options...
Tim Moore Posted November 11, 2021 Share #29 Posted November 11, 2021 Really nice work…particularly impressed with the deck and of course your accomplishment on that coppering is fantastic. Tim Gct86 and AJohnson 2 Quote Tim Moore Perfect is the enemy of good In progress DH.9a Ninak, 1/32, Wingnut Wings Docked for Repairs IJN Pre-Dreadnought Battleship Mikasa, 1:200, Hobby Boss On Deck The Blue Sky Company, 1:48, Sierra West Models Completed Triumph 3HW, 1/9, Italeri; Fiat 806 Grand Prix 1:12, Italeri; Fifie 1:32, Amati Victory Model; HMS Bounty 1:48, Artesania Latina; Endeavour 1:60; Corel; Miss Severn 1:8, Legend Model Boats; Calypso, Billing Boats; Carmen Fishing Trawler, A.L. ; Dallas Revenue Cutter, A.L., Bluenose, A.L. Link to comment Share on other sites More sharing options...
Gct86 Posted November 12, 2021 Author Share #30 Posted November 12, 2021 Flag locker a little bit different than Amati's plan. Similar to Anatomy kf the ship. Now i'm gonna aged wood GrandpaPhil and AJohnson 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.