Jump to content

Amerigo Vespucci by DanielD - OcCre - 1:100


Recommended Posts

Good evening mates, just a quick weekend update on the progress of my Amerigo Vespucci. The main mast hardware and paint is complete and installed into the hull for the last time.

 

 

IMG_5303.jpeg

Edited by DanielD
Link to comment
Share on other sites

  • 2 weeks later...
Posted (edited)

Good evening mates, it’s been well over a week since my last update. It’s not because I’ve been lazy, but rather the fore mast has been a bit of a challenge as it has an additional platform with spot lights and railings. Also, it has a radar installation with a wire cage that was a challenge to get to look more like the real AV. Not to mention the marker light at the top of the mast and deck lighting under the platform and all the associated wiring. It’s now ready to primer and paint. Should be another week or so before final installation on ship.
 

IMG_5320.jpeg

IMG_5321.jpeg

IMG_5323.jpeg

Edited by DanielD
Link to comment
Share on other sites

Good afternoon mates, I had a bit of time in the shipyard today and completed the installation of the last lighting effect, the Amerigo Vespucci traditional in port lighting. The only hard part…finding a location in the house that is dark during the day for the photo.

 

IMG_5352.jpeg

Link to comment
Share on other sites

  • 2 weeks later...

Good afternoon mates, it’s been awhile since last update…life has just been busy.

 

Been working (slowly) on a set of stairs leading to above the main bridge. The real Amerigo Vespucci has wooden steps, almost ladder like, with brass handrails and brass stair tread protectors. I’ve attempted to build something similar.

IMG_5363.jpeg

IMG_5364.jpeg

Link to comment
Share on other sites

  • 2 weeks later...
Posted (edited)

Good evening mates, it’s been awhile since my last post. Been working on the chainplates and temporary shrouds to get an idea where the rest of the deck equipment will need to go as well as equipment that will hang off the sides of the ship.

 

IMG_5372.jpeg

IMG_5373.jpeg

Edited by DanielD
Link to comment
Share on other sites

It looks fantastc!

PvG Aussie (Peter) Started modelling Jan 2022.  Joined MSW March 2024. Quote: Rome wasn't built in a day!

Current Build:  My Admiral's tasks! 😉

Past Builds:       Artesania Latina (AL) Belem (1:75), AL Vasa (1:65), Scratch build Australia II BOTTLE (1:225), AL Bluenose II (1:75); AL Bounty (1:48), 

                             AL HMB Endeavour (1:65), Trumpeter Bismarck (1:200), Border Models Avro Lancaster Bomber (1:32), AL Fokker Dr1 (1:16),

                             Das Werk WWI German U-Boat SM U-9 (1:72); Scratch build HMS Victory BOTTLE (1:530), Wolfpack PBY-3 Catalina (1;72), 

                             Scratch build MS Sibajak 1928 BOTTLE (1:1150), Imai Kagaku Spanish Galleon 1607 (1:100), Brandenburg State Yacht 1679 (1/200), 

                             HMS Endeavour (1/450) BOTTLE, ILK USS Enterprise (CV-6) (1/350), PLUS approx. 13 more ships in bottles

Link to comment
Share on other sites

Good evening, more progress on some deck equipment. These platforms started from the kit parts, but rapidly moved into scratch built. 🤷‍♂️

 

IMG_5385.jpeg

Link to comment
Share on other sites

Good morning mates, been slowly working on a set of platforms for my AV. Nearly have the second one done, a few touch ups to do then figure out how to manufacture the canopy for this platform. Close…so close to be finished with these.

 

IMG_5392.jpeg

IMG_5393.jpeg

Link to comment
Share on other sites

  • 2 weeks later...

Good evening mates, I have finally finished the four platforms that hang off the side of the Amerigo Vespucci. Now on to the next task, I’m thinking the containers for the life rafts.

 

IMG_5420.jpeg

IMG_5421.jpeg

IMG_5422.jpeg

Link to comment
Share on other sites

New task at hand, working on the 18 life raft containers scattered around the ship. In these photos I have completed the frame of the first pair of rafts.

 

IMG_5423.jpeg

IMG_5424.jpeg

IMG_5425.jpeg

Link to comment
Share on other sites

Time for an update…finished the first of two pair life raft supports, I broke the first one so it’s back to bare metal and starting over. Also, thanks to some ideas from the Admiral, I have completed the first of two canopies for the aft platforms. Slow steady progress.

 

IMG_5431.jpeg

IMG_5432.jpeg

Link to comment
Share on other sites

Very nice detailed work,  it looks awesome.  :cheers:

Bob M.

Start so you can Finish !!

Finished:         The Sea of Galilee Boat-Scott Miller-1:20 ,   Amati } Hannah Ship in a Bottle:Santa Maria : LA  Pinta : La Nana : The Mayflower : Viking Ship Drakkar  The King Of the Mississippi  Artesania Latina  1:80 

 

 Current Build: Royal Yacht, Duchess of Kingston-Vanguard Models :)

Link to comment
Share on other sites

16 hours ago, Knocklouder said:

Very nice detailed work,  it looks awesome.  :cheers:

Bob M.

Thank you for your kind comments!

 

Daniel

Link to comment
Share on other sites

  • 2 weeks later...

Good evening mates, time for a life raft update. I have the starboard side completed with only one left to manufacture for the port side.

 

IMG_5453.jpeg

IMG_5454.jpeg

IMG_5455.jpeg

IMG_5456.jpeg

Link to comment
Share on other sites

Good evening mates. I’ve been working on the first of several supports for some small boats on board the Amerigo Vespucci. The OcCre plans are a bit plain, so I spruced them up making them out of I beams, very similar to the real AV.

 

IMG_5469.jpeg

Link to comment
Share on other sites

Posted (edited)

Good evening mates, in addition to working on the small boat I-beam structure, I have been detailing the OcCre supplied hull to a more realistic small boat by adding a scratch built propeller and rudder. A few more details to add, small railing at the stern, rope coil at the stern and of course the boat ID, NC 90.

 

IMG_5475.jpeg

IMG_5468.jpeg

IMG_5472.jpeg

IMG_5473.jpeg

Edited by DanielD
Link to comment
Share on other sites

Good evening mates, I have completed the first of eleven small boats present on the Amerigo Vespucci. It’s as close as I can get as I have been unable to find many pictures of the NC 90.

 

IMG_5477.jpeg

IMG_5478.jpeg

Link to comment
Share on other sites

Posted (edited)

Good evening mates, today was a bit drippy in the northwest USA, which means more time in the shipyard. I decided to work on another small boat for the starboard side of the ship, specifically MCN 1675. I had to do a lot of modifications to the metal hull provided in the kit. As you can see from the first image, the real MCN 1675 is a flat bottom boat with two propellers and rudders. The blank provided in the kit is the next image with a pronounced keel. I had to file down the keel to make a better representation of the real small boat. Followed up with twin scratch built screws and rudders and completed with a nice air brushed paint job. Finally added a new deck (work in progress).


One downside to how this boat is coming out…I’m not happy with the first one I built so I think I will tear it apart and build it again. I think I’ve subscribed to the thought process that it’s not about how fast you complete the build, but that you are happy with the result when it’s finished.

IMG_0748.jpeg

IMG_5475.jpeg

IMG_5484.jpeg

IMG_5485.jpeg

Edited by DanielD
Link to comment
Share on other sites

  • 2 weeks later...

Good evening mates, the last week or so I have been working on one of the small boats on board the AV. The first image is an actual photo of MCN 1675 and the next two my interpretation of that small boat.

 

IMG_0749.jpeg

IMG_5494.jpeg

IMG_5495.jpeg

Link to comment
Share on other sites

  • 4 weeks later...

Good evening mates. It’s been awhile since my last update, part of the reason is that I was unhappy with the first small boat I constructed, so I completely took it back to bare metal and started over. Pictures of the new version coming soon.

 

However, today I was interested in doing something different so I went back to building the iron works that supports two of the small boats. Here is the result.

 

IMG_5532.jpeg

IMG_5533.jpeg

IMG_5535.jpeg

Link to comment
Share on other sites

  • 3 weeks later...

Good evening mates, it’s been a while since my last post. Life has been busy, but I have been plugging along on one of the small boats aboard the AV. Only three more like this to build.

 

IMG_5576.jpeg

IMG_5575.jpeg

IMG_5574.jpeg

Link to comment
Share on other sites

  • 2 weeks later...

Good morning mates. AV progress has been slow as I’ve been very busy with life this summer. Still, I find time to spend some time moving forward. Here is the latest, davits installed with one hanging boat.

 

IMG_5580.jpeg

IMG_5581.jpeg

Link to comment
Share on other sites

Posted (edited)

Good morning mates. This week’s update falls around the pin rails. The OcCre AV kit includes the typical rails for the running rigging. However, the actual Amerigo has a unique, at least from what I’ve seen, pin rails that have sheathes below the pins (see the last image). The running rigging first runs below the rail, around a sheath before being tied off. This is my attempt to mimic the AV.

 

IMG_5588.jpeg

IMG_5589.jpeg

IMG_5590.jpeg

IMG_0775.jpeg

Edited by DanielD
Link to comment
Share on other sites

  • 4 weeks later...

Well mates, I can’t believe it’s been so long since my last post. Life has been busy, but my Amerigo Vespucci plods forward. I’ve been working on the mast pin rails, different on the AV in that each pin has a matching sheath. The running rigging goes around the sheath before being tied off at the rail with the excess stored on a vertical rack I’m still figuring out how to make. A couple images so far. If you look close, you can see the sheaths below the rails.

 

 

IMG_5622.jpeg

IMG_5623.jpeg

Edited by DanielD
Link to comment
Share on other sites

Good evening mates. This next task has taken a long time to figure out what to do. The Amerigo Vespucci has a lantern type light near the stern of the ship. I have wired for this, but have not, until recently, found a lantern that would work. Thanks to Syren Ship Model Company, I finally found my lantern.

 

IMG_5633.jpeg

IMG_5632.jpeg

Link to comment
Share on other sites

  • 1 month later...

Thanks for stopping by and/or following along with my OcCre Amerigo Vespucci build. Here is a wide shot from today along with some closeups of what I’ve been working on recently.

 

IMG_5668.jpeg

IMG_5669.jpeg

IMG_5670.jpeg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...