Jump to content

Recommended Posts

Posted

Thanks again Daniel, as always. I feel a bit guilty taking advantage of all the research you have done!  Zooming in on your second picture in comment #387 above I can very clearly see the light boxes you have used. I will have to research a small LED spot that comes in different colors with a voltage that can be run on the same circuit. 

  • 1 month later...
  • 1 month later...
Posted (edited)

Good evening mates, it’s been some time since my last post. Progress continues on my Amerigo Vespucci, although very slow. I have new job responsibilities that have consumed much of my time, leaving little for shipyard work.

 

Here are a couple of images of what I’ve been up to. Apparently model builders strive to do things the most difficult way possible. In this step I needed to make a net to hang on some rigging. Instructions call for a pre fabricated plastic net, which, well…looks like plastic. So I attempted to manufacture a net from thread. Here is my attempt at a 30mm x 50mm net with 836 clove hitch knots at approximately 1.5 mm spacing, which took approximately 10 hours to build.

 

IMG_6598.jpeg

IMG_6597.jpeg

Edited by DanielD
Posted

cargo/safety net looks great

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023

 

On hold

MHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   

U552 German U Boat - Trumpeter -

1/48  Amerigo Vespucci     1/84 - Panart-   

HMS Enterprise  -CAF -  1/48     

Finished     

Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - 

Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024

Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished 

 Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished 

Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Posted

Daniel I am adding the final touches to my OcCre Endeavour and will soon crack open my Amerigo Vespucci kit. I have limited my excitement and preliminary research on the AV so as not to steal my enthusiasm away from the Endeavour. I am now ready to jump in and I have started rereading your build log along with Mike’s comments. For all my previous ship builds I have tried to stay as authentic as my research and skills permitted. You are going to think this crazy but for my AV my plan is to step outside the box and employ some artistic adaptations I think will enhance the beauty of the ship while not being totally authentic. 
I will be setting up my build log real soon and will add the linc to a comment here. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...