Jump to content

CUTTY SARK by Reub - Artesania Latina - 1:84


Recommended Posts

Hi all. 
the channels have been fitted as well as the larger deadeyes(i am busy with the smaller ones). I messed up with the channels in the provided mohogany so i used some left over walnut. I also fitted some of the features on the front of the boat. The anchor davits were quite tricky as the instructions are blurry. The front railing has also been fitted. 
regards. 

4CCA9C3C-4746-42F7-B1FB-CB77D14EB438.jpeg

8E4CDB3B-51AB-431F-8ABA-21D22E52A0BF.jpeg

8A5EAB12-89AF-4AAF-9903-3D60767AD468.jpeg

8361A0EB-179E-46D9-8521-778E05739EBC.jpeg

8A16825A-0917-4C60-B03A-4A7112643066.jpeg

F7D4A87C-9C92-4319-BDA2-77F3FF221E1A.jpeg

B1DD3775-0478-46D4-A78D-08A7998A024F.jpeg

44FB0CE0-2CE2-4A9E-A91F-C5A21A416657.jpeg

3C816A17-5FDA-46AE-B0A9-0AEDA020A1CE.jpeg

Link to comment
Share on other sites

2 hours ago, Начинающий судомоделист said:

Замечательная работа, планирую в будущем также заняться сборкой Катти Сарк! 👍

Удачи! Обязательно создайте журнал сборки, когда начнете, мы будем рады увидеть вашу работу.

Я планирую начать свой собственный (комплект Revell) очень скоро.

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

Great work on your Cutty Sark so far. It's always fun to see others working on the same ship (different kits) to see the difference in fittings and materials. I managed to get the bow and stern decoration from AL for my model after having seen it on another model in the Build forum. Keep up the great work!

Build Log: Billing - Cutty Sark

 

In The Gallery: HMS Unicorn, HMAV Bounty, L'Etoile, Marie Jeanne, Lilla Dan, Zeeschouw "Irene"

 

A Toast: To a wind that blows, A ship that goes, And the lass that loved a sailor!

Link to comment
Share on other sites

  • 1 month later...

Hi all. 
a milestone has been reached. All deck fittings have been added and the whole deck has been varnished( unfortunately, the metal pieces on which the 3 lifeboats at the back rest are too small and are broken. I have decided to hang two of the lifeboats on the rear davits). The next step is to fit all the eyebolts and anchors etc.. and then its onto the masts and rigging. 
kind regards

4FF0D587-EC3A-4834-9A1D-5F5E22C75701.jpeg

38C70B72-4042-4CF9-AB04-AFC2877D37E0.jpeg

6BF54ECC-2ED0-438F-89E1-66C3C7137536.jpeg

CD7F995A-6327-43E5-B1FE-99513A490B30.jpeg

98589917-4172-4B62-A4AF-448E0CA7BDF3.jpeg

911F3B1C-C9F6-4A03-9770-9EAFF79C2E52.jpeg

4DC80BF5-5B38-45D6-BBDB-A067522EAE32.jpeg

935F1D70-97C3-4A62-8C40-7D21D0C0E44A.jpeg

Link to comment
Share on other sites

Very Nice!!

Regarding the Boat Skids, you could keep the Legs and Laminate some strip wood with a slight Curve, dill some holes in the ends of the laminated strip and fit the Legs. (If you don't have the Legs, you cold make them from Brass Wire.)

 

Just an idea.... 🙂

 

Cheers.... HOF.

 

Edited by hof00

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

12 hours ago, hof00 said:

Very Nice!!

Regarding the Boat Skids, you could keep the Legs and Laminate some strip wood with a slight Curve, dill some holes in the ends of the laminated strip and fit the Legs. (If you don't have the Legs, you cold make them from Brass Wire.)

 

Just an idea.... 🙂

 

Cheers.... HOF.

 

Thanks for the advice however i think ill still go with the lifeboats on the davits. 
kind regards

Link to comment
Share on other sites

Hi all. Small update. 
the bowsprit is done and work has started on the foremast. Alot of the metal pieces’ rings came broken as can be seen in one of the photos. I have thus far used the intact ones. Any ideas to fix or substitute are welcome. Ordinarily, i would just super glue the broken pieces but the broken off rings are nowhere to be found. Maybe i just have to insert extra eyebolts in the mast or is there a more elegant solution? All comments and suggestions are welcome. 
kind regards

C1B236E5-4142-4C9F-B840-D0FB80DDC82F.jpeg

050D1A2E-8CAA-4708-9AC7-4A3B1062E15B.jpeg

1DF98A8D-5AF6-4E8E-BD36-4DC746962F1F.jpeg

1AE7D2D3-DDA5-4B33-AF61-29A19ACD9899.jpeg

37B00319-7B2E-40FF-B162-B055765A1D22.jpeg

1EC2E816-7B54-4910-A919-ECA17C1372EE.jpeg

2A8769C1-C3AA-45C5-8C97-4382C79CE53B.jpeg

88DB43AE-C461-4A3E-96C2-7EF29C8F0B65.jpeg

C86C49A6-5778-49F0-AC27-74D3DF7DFD12.jpeg

Link to comment
Share on other sites

Hi there,

Maybe you could remove the broken Ring, (Carefully as they are White Metal, File?), Drill a small hole and replace with an Eyebolt attached with CA.

To add strength the Eyebolt could be attached after the fitting is attached to the Mast so the Shaft of the Eyebolt penetrates the Mast also.

 

Another idea, if the thickness of the fitting is too thin to drill, you could always mount an Eyebolt immediately under the fitting attached directly to the Mast.

 

My guess is that these rings are for Stays so you want something that ca withstand a bit of tension.

 

(My two cents worth. 🙂)

 

Cheers....HOF.

 

 

 

Edited by hof00

Completed Builds:

 

A/L Bluenose II

A/L Mare Nostrum

Sergal/Mantua Cutty Sark

A/L Pen Duick

A/L Fulgaro

Amati/Partworks 1/200 Bismarck

A/L Sanson

Link to comment
Share on other sites

Is it an idea to ask AL for replacement?

Leo Moons

Nous sommes condamnés à être libre

 

Present build: Cutty Sark by Sergal/Mantua 1:78
 

Previous builds:

- Collie by Graupner RC Sailing boat

- Blue Nose II by Billing Boats

- Harvey by Artesania Latina

- Oceanic by Revell RC Tugboat

- Thyssen II by Graupner RC Pushing boat

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...