palmerit Posted yesterday at 03:18 AM Author Share #61 Posted yesterday at 03:18 AM I assume belaying pins are glued in place at this point Right? AJohnson 1 Quote Current Builds: Sherbourne 1763 (Vanguard Models), Duchess of Kingston (Vanguard Models) Link to comment Share on other sites More sharing options...
AJohnson Posted yesterday at 05:48 AM Share #62 Posted yesterday at 05:48 AM (edited) 2 hours ago, palmerit said: I assume belaying pins are glued in place at this point Right? I do, they will be fiddly to add later. Just make sure they are fully seated so enough pokes out of the underside for you to wrap your rigging around. Something I didn’t do with a few on my Trial build on a couple of them. Your build is looking very good, like how neat it looks on post #59. Edited yesterday at 05:50 AM by AJohnson Quote Andrew Current builds:- HM Gun-brig Sparkler - Vanguard (1/64) , HMAV Bounty - Caldercraft (1/64) Completed (Kits):- Vanguard Models (1/64) :- HM Cutter Trial, Nisha - Brixham Mumble Bee' Caldercraft (1/64) :- HMS Orestes(Mars), HM Cutter Sherbourne Paper Shipwright (1/250) :- TSS Earnslaw, Puffer Starlight Link to comment Share on other sites More sharing options...
palmerit Posted 1 hour ago Author Share #63 Posted 1 hour ago Lesson learned, lesson shared: I was building the catheads and since I had removed the char from other parts (like belay pin racks) I just plunged ahead and removed the char from the small parts for the catheads too. I should have waited until get were put together or just not worried about it since I was planning to paint them. The small pieces at the end of the catheads are small and after sanding they now don’t fit snuggly. Quote Current Builds: Sherbourne 1763 (Vanguard Models), Duchess of Kingston (Vanguard Models) Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.