Jump to content

Recommended Posts

I'm sure you have a good reason for wanting oak, but it may be hard to locate in those dimensions.

 

I would suggest you  send an email to Joe at the Modelers Sawmill ..  ( his email is right there on the home page.  Modelers Sawmill is one of  Model Ship World's sponsors.

Oak should be easy for Joe to source, and he may do a custom job for you.

“Indecision may or may not be my problem.”
― Jimmy Buffett

Current builds:    Rattlesnake

On Hold:  HMS Resolution ( AKA Ferrett )

In the Gallery: Yacht Mary,  Gretel, French Cannon

Link to comment
Share on other sites

I would be reluctant to use oak in planking that small.  The grain is quite coarse.  I have been told beech is 'scale oak'.  It is tight grained and easy to work with.  I get beech from OCOOCH HARDWOOD.

 

That having been said, if you are dead set on using oak and Modelers Sawmill cannot get it, Ocooch probably can.    :cheers:

Chuck Seiler
San Diego Ship Modelers Guild
Nautical Research Guild

 
Current Build:: Colonial Schooner SULTANA (scratch from Model Expo Plans), Hanseatic Cog Wutender Hund, Pinas Cross Section
Completed:  Missouri Riverboat FAR WEST (1876) Scratch, 1776 Gunboat PHILADELPHIA (Scratch), John Smith Shallop

Link to comment
Share on other sites

  • 4 weeks later...

I second Chuck's recommendation on beech instead of oak.  Beech is a tight grained hardwood that takes stain well and is easy to work with.  Oak is too course in my opinion for model work.  A good source for beech is popsicle sticks.  Save the sticks after you've enjoyed your ice cream bar.

 

Wawona 59

John

 

Next Project: Gifts for friends:  18th Century Pinnace, Kayak 17, Kayak 21

 

Indefinite Hold for the future:  1/96 Flying Fish, Model Shipways

 

Wish list for "Seattle Connection" builds:  1/96 Lumber Schooner Wawona, 1/32 Hydroplane Slo-Mo-Shun IV, 1/96 Arthur Foss tug, 1/64 Duwamish cedar dugout canoe, 1/96 Downeaster "St. Paul"

 

Selected Previous Completed Builds:  Revell - 1/96 Thermopylae; Revell - 1/96 Cutty Sark, Revell - 1/96 Constitution, Aurora - Whaling Bark Wanderer, Model Shipways - 1/96 Phantom, AL - 1805 Pilot Boat Swift, Midwest - Chesapeake Bay Flattie, Monitor and Merrimac, Model Trailways - Doctor's Buggy

 

Link to comment
Share on other sites

I third Chuck's recommendation. If you want to see what beech decking looks like, look in thread "snapshot of members current builds". I've put a few pictures of L'Unite in there as I've been doing the build and it has beech planking.

Rich

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

i also secom

Edited by barkeater

Completed scratch build: The armed brig "Badger" 1777

Current scratch build: The 36 gun frigate "Unite" 1796

Completed kits: Mamoli "Alert", Caldercraft "Sherbourne"

Link to comment
Share on other sites

On 10/1/2024 at 4:13 PM, Chuck Seiler said:

That having been said, if you are dead set on using oak and Modelers Sawmill cannot get it, Ocooch probably can. 

I've sourced a lot of wood from Ocooch, and was told they would do custom jobs, but they turned me down on a request for some 1/32 sheets.

Do you think they would do strips like 1x 6mm?

“Indecision may or may not be my problem.”
― Jimmy Buffett

Current builds:    Rattlesnake

On Hold:  HMS Resolution ( AKA Ferrett )

In the Gallery: Yacht Mary,  Gretel, French Cannon

Link to comment
Share on other sites

That surprises me, although I never got anything smaller than 1/16".  There might be a limit down to which they can work.  It wouldn't hurt to ask. 

 

What wood?

Chuck Seiler
San Diego Ship Modelers Guild
Nautical Research Guild

 
Current Build:: Colonial Schooner SULTANA (scratch from Model Expo Plans), Hanseatic Cog Wutender Hund, Pinas Cross Section
Completed:  Missouri Riverboat FAR WEST (1876) Scratch, 1776 Gunboat PHILADELPHIA (Scratch), John Smith Shallop

Link to comment
Share on other sites

Modelers Central carries Beech strips. Just checked and they have 14 different sizes in 950 mm lengths. Unfortunately, in 1 mm the widest they have is 5 mm. I've ordered from them before and was satisfied with product and shipping time.

Rich

Completed scratch build: The armed brig "Badger" 1777

Current scratch build: The 36 gun frigate "Unite" 1796

Completed kits: Mamoli "Alert", Caldercraft "Sherbourne"

Link to comment
Share on other sites

When I tried to custom order 1/32‐inch thick sheets earlier this year, Ocooch told me that the thinnest they could do was 3/64-inch.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...