18th Century Merchant Man Half Hull Planking Kit by Jim M - NRG - 1:48

[Jim M]

I am excited to start with my next project, the planking tutorial. Prior to receiving the kit, I had the manual printed.

 

I am impressed with the kit contents and how it was packaged.

 

Next I mounted the build sheet, on a piece of 1/2 foam I had as a build board using some spray adhesive.

 

I need to pick up some markers, and chart tape, but I am eager to get this project moving forward this week.

 

jim

Edited October 20 by Jim M

[RossR]

Looking forward to following along.  Good luck.  

[Jim M]

1 hour ago, RossR said:

Looking forward to following along.  Good luck.  

thank you 

[damaartenman]

Following on this one 🙂 Hope you will enjoy it.

[Gregory]

Looking forward to seeing your work on this..  I know you are looking to get the planking thing down..

[Desertanimal]

I’ll be watching! Enjoy!

[kurtvd19]

I think you are going to enjoy this build.

Kurt

[Jim M]

Good evening, 

 

After a challenging week, I was able to get some modeling done tonight.

 

First I labeled the parts so that I could remember what is what

 

Next I then cut out the keel, keelsom, stern post, fore keelsom, stem, stemson, deadwood and the l-piece from the kit. 

 

 

I then used some double sided tape to help dry fit the pieces

 

Next I focused on getting the stemson and stem lined up correctly with a nice joint.

 

I then removed the char from the pieces, to work on the fit. I ended up making a couple sanding sticks after trying to use an old blade to scrap off the char. The results are as follows:

 

Finally the fit for the stemson to the stem now looks like:

 

I continued per the manual with the following items to get a nice fit. I realigned my keelsom to the its matching bulkhead location, and then worked on the fore keelsom to get it to fit. and match its bulkheads.

 

The final result is 

 

Finally today, I marked out the rabbets. I will let it sit overnight before I make some sawdust and cut them out.

 

jim

[Jim M]

Good afternoon, 

 

I made some progress on my kit today,

 

First I added the rabbet

 

Next, i cut out the 4th and 5th bulkhead so I can get a better visualization of the  the rabbet on the stem, and stemsom.

 

 

I  was able to get some good contract with a sample 1/32 piece from my last project.

 

 

Next I spent some more time deepening the rabbet, and getting the angle right. I also use an eraser to remove some of the pencil marks

 

 

Hopefully you can see the transition to 90 here in the stem

 

Finally I started the gluing process

 

 

I did break the stem post as I had to move it and it was setting up faster than expected. I noticed my crafting room was 78

 

I also found that the stem was lifting, so I used a couple or 3x2x1 blocks to hold it down.

 

Cheers

 

jim

Edited October 23 by Jim M

[Jim M]

Update here is the better picture of the glued keel. you can see where the keelsom broke. 

[Jim M]

Good evening. Here is my next update.

 

Today, I extended the slots on the keelson.

 

Next I glued in the frames in two batches.

 

Batch 1 -> Frames E, C A, 1, 3

 

Batch 2 -> Frames -> D, B, DF (O), 2, 4

 

Next I added the fillers, and knocked off some of the char on the bulkheads.

 

I then marked out the bearding line use frames G and H as guides. I then took a french curve to make the curve.

 

 

 

 

Next, I shaped the bearding line by marking 1/32 and then blending in the curve.

 

Next i extended the rabbet along the keel until the the stern post. This rabbet is 90 degrees.

 

I then glued in the deadwood, sternpost and L-shaped pieces

 

Finally I glued in F and G frames. I initially had H glued in but I was a  little hasty and removed it before it set.

 

 

I will let this firm up over night and continue on the next step tomorrow.

 

Cheers 

[Jim M]

Good morning,

 

I know it has been a while since I last posted. Real life has gotten in the way. 

 

By November 1, I had completed the following:

 

I started with finishing adding the supports and the transom. Before adding it, I realized I glued the L-Piece onto the board incorrectly, so I had to pull out the isopropyl out and fix its positioning. I did use a square to line up the transom.

 

 

For the next few days, I spent some time getting the top line correct. I used chart tape to help visualize the curve. From there I use a square to transfer the line to the bulwarks.

 

If you notice, I had to add a shim on 5a and AF. This is because I deepened those connections. 

 

Overall I am happy with the line. 

 

Last week I broke down and purchased a Dremel.  Thus last night, I finally got back to the project, and I started with shaping the top line. I purposely did not go all the way to my marks, so that I would have some room if necessary after planking to get the curves correct. 

 

Here is the stern section. It will require some more sanding, as there is still a high spot.

 

 

The bow also is looking not bad. 

 

 

Here is a view of the sanded top line.

 

Finally I started to fair the bulwarks from DF -> AF.

 

The curve is starting to take shape and I am getting some good contact with the plank.

 

Frame 4A is still not correct. I may need to add a filler to fix the line a bit.

 

Also when I tested the fit along the top line i noticed I had a gap as frame 4 is causing a high spot.

 

 

 

Overall the fairing is going well. I still need some more work on the bow half of the hull, but I decided to walk away last night as I do not want to rush things.

 

Though I did notice that my bow rabbet is a little shallow so I will deepen it too.

 

Cheers 

 

[palmerit]

Definitely take time fairing the stern end. Take a look at some of the nice examples to see what it should/could look like and really make sure you can lay planks smoothly. I probably spent 10-20x longer fairing the last inch of the hull than I did the rest of the hull (didn't help that I first did it without the transom and then realized I took too much off some of the frames and had to add wood back). In retrospect, I also had a bit of a discontinuity (elbow) in the bow end that I probably could have seen if I had more patiently dry tested some planks. After now 2 1/2 plankings (well, maybe the Dory only counts 1/4) I'm getting a better sense of what plankings should look like. 

Edited November 12 by palmerit

[Jim M]

On 11/12/2024 at 2:29 PM, palmerit said:

Definitely take time fairing the stern end. Take a look at some of the nice examples to see what it should/could look like and really make sure you can lay planks smoothly. I probably spent 10-20x longer fairing the last inch of the hull than I did the rest of the hull (didn't help that I first did it without the transom and then realized I took too much off some of the frames and had to add wood back). In retrospect, I also had a bit of a discontinuity (elbow) in the bow end that I probably could have seen if I had more patiently dry tested some planks. After now 2 1/2 plankings (well, maybe the Dory only counts 1/4) I'm getting a better sense of what plankings should look like. 

 

@palmerit

 

I am starting to understand how planking and fairing should be done now. I am really loving my dremel with the wand attachment. I keep it at under 10k in speed and go slow. I am also using a 120 grit sandpaper so that is not that aggressive.

[Jim M]

Good evening. A minor update on the planking tutorial.

 

Today finished fairing the bow portion of the hull. I was able to get a nice curve on the hull.

 

Here is a photo just about the second strake.

 

 

This is approximately the second strake.

 

 

The garboard 

 

 

Next, I started to tackle the top line in the stern.

 

You can see I have a low spot on frames E and D.

 

I used thread to give me a nice line along the bulwarks.

 

More sanding, and I am getting a little closer.

 

The lower top line is starting to curve nicely a little high spot on A.

 

 

After some sanding with a long sanding block I was able smooth out that high spot

 

Here you can still see the low spots on E and D.

 

 

I am pretty close here, I need to thin out G a bit more, and get a nice line. I started to address the the upper part of the top line to blend nicely into the transom.

 

 

Have a good night.

 

Cheers

[Jim M]

Good evening a minor update for today.

 

I did some more fairing of the hull and i focused on the stern. The sample board is fitting nicely. 

 

 

Tomorrow plan is to get the counter in and finish the fairing.  Hopefully I can get the planking bands identified 

 

jim

[Jim M]

On 10/14/2024 at 12:29 PM, kurtvd19 said:

I think you are going to enjoy this build.

Kurt

I am @kurtvd19.  This build is adding some clarity to how ships should be planked. 

[Jim M]

Good evening.  

 

Tonight I added the counter. I was a little aggressive with the sanding and I added a shim to get a solid connection.  Secondly i mapped out the wale and added a string line to get the bottom into a nice curve. 

 

Have a good night. 

Edited 12 hours ago by Jim M