Mike Collier Posted October 24 Share #1 Posted October 24 Started the Indian Girl Canoe . I first built the building board, then installed the keel. I started to plank the sides got four rows on each side done. I needed to take a break after because the fumes we’re getting to me. JacquesCousteau 1 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted October 24 Author Share #2 Posted October 24 Sorry had a heck of to get the photo library up. SiriusVoyager, Scott Crouse, robert952 and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted October 25 Author Share #3 Posted October 25 Today’s work on my Indian girl canoe . Planking the hull. ccoyle, Bryan Woods, SiriusVoyager and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Bryan Woods Posted October 26 Share #4 Posted October 26 I learned to focus beveling those tiny planks, making that turn to the bottom:-) You’are doing a great job ! Almost off that strongback! Knocklouder and SiriusVoyager 2 Quote Current builds: Le Martegaou- 1:80 - Billing Boats Back on the shelf: Gretel - Mamoli Nonsuch 30 - 1:24 - Model Shipway Completed builds: Mini Oseberg no 302 -Billing Boats Sea of Galilee boat Lowell Grand Banks dory, Norwegian sailing pram Muscongus bay lobster smack Peterboro Canoe- Midwest Captain John Smith’s shallop - Pavel Nikitin Chesapeake double kayak Link to comment Share on other sites More sharing options...
Mike Collier Posted October 26 Author Share #5 Posted October 26 Thanks Bryan, I’m trying my best. Bryan Woods 1 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted October 26 Author Share #6 Posted October 26 Finished plank the canoe today. I think I’ll sand it while it’s still on the building board. yvesvidal, Bryan Woods, JacquesCousteau and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted October 27 Author Share #7 Posted October 27 Sanded the hull today, removed from building board and added the pieces to the peaks ends. robert952, Paul Le Wol, JpR62 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Wawona59 Posted October 27 Share #8 Posted October 27 Mike, Beautiful work on the canoe. Cedar strip canoes are popular here in the wet Pacific NW. What kind of finish are you planning for her? Clear WOP or linseed oil perhaps? I'd like to follow along on this one. Keep up the good work. She's going to be a real "looker" when you finish. robert952, Paul Le Wol and king derelict 3 Quote Wawona 59 John Next Project: Gifts for friends: 18th Century Pinnace, Kayak 17, Kayak 21 Indefinite Hold for the future: 1/96 Flying Fish, Model Shipways Wish list for "Seattle Connection" builds: 1/96 Lumber Schooner Wawona, 1/32 Hydroplane Slo-Mo-Shun IV, 1/96 Arthur Foss tug, 1/64 Duwamish cedar dugout canoe, 1/96 Downeaster "St. Paul" Selected Previous Completed Builds: Revell - 1/96 Thermopylae; Revell - 1/96 Cutty Sark, Revell - 1/96 Constitution, Aurora - Whaling Bark Wanderer, Model Shipways - 1/96 Phantom, AL - 1805 Pilot Boat Swift, Midwest - Chesapeake Bay Flattie, Monitor and Merrimac, Model Trailways - Doctor's Buggy Link to comment Share on other sites More sharing options...
Mike Collier Posted October 27 Author Share #9 Posted October 27 I’ll have to paint it, I had use a little body filler on the bottom. robert952 1 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted October 30 Author Share #10 Posted October 30 I messed up on my canoe, the instructions said to soak the ribs in 50/50 solution of water and ammonia. I let them soak for 3 hours and then I started to glue them in, the ca glue turned white and dried hard. I’ll have to removed clean them and reglue , I should’ve rinse them off before I glued them in. I’ll never use ammonia again. JacquesCousteau and robert952 2 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted October 30 Author Share #11 Posted October 30 I did remove and clean the ribs and glue with Titebond wood glue and then clamped. Bryan Woods, davec, Paul Le Wol and 7 others 10 Quote Link to comment Share on other sites More sharing options...
robert952 Posted October 30 Share #12 Posted October 30 Watching this build with interest. This canoe (and the Petersboro) sits in my stash. I am thinking one of those may be my next build. Good start. Building these is a lot of trial and learn process. Bryan Woods and Paul Le Wol 2 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?) Link to comment Share on other sites More sharing options...
JacquesCousteau Posted October 30 Share #13 Posted October 30 Good fix from the ammonia problem! When I was making the Peapod, which has the same construction method, I found it useful to use a spacer block to help keep the frames even. Paul Le Wol and robert952 2 Quote Current Builds: Lake Chapala Canoa de Rancho (1:32) [Scratch]; Lancha Chilota Coasting Sloop (1:32) [Scratch]; Completed Kit Builds: Model Shipways Dory (1:24); NRG Half-Hull Planking Kit (1:48); Midwest Maine Peapod (1:14) [Kit] Completed Scratch Builds: Xochimilco Trajinera (1:32); Juana y José Cross Section (1:32) Link to comment Share on other sites More sharing options...
Mike Collier Posted October 30 Author Share #14 Posted October 30 I always learn from each of my builds, I learned from this never to use ammonia again! Jacques how did you use the spacer block? king derelict, JacquesCousteau and robert952 3 Quote Link to comment Share on other sites More sharing options...
JacquesCousteau Posted October 31 Share #15 Posted October 31 I checked on the plans how far apart the frames are supposed to be, and used scrap wood to make a small piece of the same width. After getting the first frame in place, I just placed the spacer to make sure each subsequent frame was even. robert952 and Mike Collier 1 1 Quote Current Builds: Lake Chapala Canoa de Rancho (1:32) [Scratch]; Lancha Chilota Coasting Sloop (1:32) [Scratch]; Completed Kit Builds: Model Shipways Dory (1:24); NRG Half-Hull Planking Kit (1:48); Midwest Maine Peapod (1:14) [Kit] Completed Scratch Builds: Xochimilco Trajinera (1:32); Juana y José Cross Section (1:32) Link to comment Share on other sites More sharing options...
Mike Collier Posted November 2 Author Share #16 Posted November 2 Got some more work done on my canoe. I think it’s coming along nicely but not my best work. Paul Le Wol, yvesvidal, SiriusVoyager and 5 others 8 Quote Link to comment Share on other sites More sharing options...
robert952 Posted November 4 Share #17 Posted November 4 Looks good to me. Keep up the work and it will come together nicely. JacquesCousteau 1 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?) Link to comment Share on other sites More sharing options...
Mike Collier Posted November 6 Author Share #18 Posted November 6 Thanks for the positive words guys. I think I got the building part done, now on to the finishing. robert952, yvesvidal, JacquesCousteau and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted Friday at 08:45 PM Author Share #19 Posted Friday at 08:45 PM Sealed the canoe with spray shellac today and started to work on the paddles robert952, yvesvidal, SiriusVoyager and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted Monday at 06:42 PM Author Share #20 Posted Monday at 06:42 PM Finished my Indian Girl canoe. JacquesCousteau, robert952, ccoyle and 5 others 8 Quote Link to comment Share on other sites More sharing options...
ccoyle Posted Monday at 08:08 PM Share #21 Posted Monday at 08:08 PM Good job, Mike! robert952, Paul Le Wol and JacquesCousteau 3 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Bf 109E-7/trop Link to comment Share on other sites More sharing options...
robert952 Posted Monday at 10:12 PM Share #22 Posted Monday at 10:12 PM Nice looking model. Congrats on finishing it. JacquesCousteau and Paul Le Wol 2 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?) Link to comment Share on other sites More sharing options...
Mike Collier Posted Monday at 11:06 PM Author Share #23 Posted Monday at 11:06 PM Thank you Robert. robert952 1 Quote Link to comment Share on other sites More sharing options...
Mike Collier Posted Monday at 11:07 PM Author Share #24 Posted Monday at 11:07 PM Thank you CCoyle. robert952 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.