realworkingsailor Posted Wednesday at 04:11 PM Share #1 Posted Wednesday at 04:11 PM Yesterday I was shopping online at a Canadian hobby store and noticed an announcement regarding Tamiya spray cans. To summarize: Effective September 24th the importation of all Tamiya spray cans has been banned. This includes all paints in the TS, PS and AS ranges and all forms of Tamiya spray primer, but does not concern any non-aerosol products. Retailers are permitted to sell their remaining stock, but all imports have been halted. Any stock held by distributors has had to be destroyed. There seems to be a lot of online hysteria regarding this ban, but it is NOT a political issue. There is a chemical component in Tamiya spray cans that has been banned in Canada since 2010, due to environmental and/or health concerns. This is likely a case of the government regulators finally getting around to evaluating Tamiya’s products. I would also strongly caution anyone trying to import Tamiya paint via a US or other foreign retailer. If Canada customs decides to inspect your parcel there’s a good chance the paint will be removed and destroyed, and likely you will have a struggle to get any form of refund. Andy Ryland Craze, mtaylor, Snug Harbor Johnny and 4 others 4 3 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
James H Posted Wednesday at 08:25 PM Share #2 Posted Wednesday at 08:25 PM I consider Tamiya Fine Surface Primer to be one of the very best around. If the Mr Surfacer equivalent isn't banned, then that is every bit as good. realworkingsailor, Canute, mtaylor and 1 other 4 Quote SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! On the bench: HMS Harpy - 1796 (production prototype) - Vanguard Models - 1:64 On Hold: HMS Winchelsea Double Capstan - Syren Ship Models - 1:48 Finished US Baltimore Armed Privateer Schooner Grecian 1812 (prototype) - Vanguard Models - 1:64 'Zulu' fishing boat, Vanguard Models - 1:64 Fifie' fishing boat, Vanguard Models - 1:64 HMS Flirt 1782, Vanguard Models - 1:64. Duchess of Kingston c.1780 - Vanguard Models - 1:64 HMS Sphinx 1775, Vanguard Models - 1:64 ERYCINA - Plymouth Ketch-Rigged Trawler 1882, Vanguard Models - 1:64. 'Nisha' - The Brixham 'Mumble-Bee' - Vanguard Models 1:64 'Saucy Jack' fishing boat - Vanguard Models - 1:64 Ranger 'Barking Fish Carrier' - 1864 - Vanguard Models - 1:64 HMS Indefatigable - 1794 (production prototype), Vanguard Models - 1:64. Indeterminate: Tender Avos - Master Korabel - 1:72. H.M.S. Victory (production prototype) - Amati - 1:64. HMS Granado 1742 (cross section) - CAFModel - 1:48 Link to comment Share on other sites More sharing options...
realworkingsailor Posted Wednesday at 08:55 PM Author Share #3 Posted Wednesday at 08:55 PM 21 minutes ago, James H said: I consider Tamiya Fine Surface Primer to be one of the very best around. If the Mr Surfacer equivalent isn't banned, then that is every bit as good. Doing some digging around, it would appear the chemical in question used in the Tamiya spray paints is 2-Butoxyethanol CAS no. 111-76-2 I believe this is used to forestall the drying process in acrylic paints. Vallejo used to have it in their airbrush thinner and flow improver. If I’m not mistaken Mr Surfacer is a lacquer paint and shouldn’t have 2-Butoxyethanol in it. Andy druxey, Canute, DocRob and 1 other 4 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy Link to comment Share on other sites More sharing options...
DocRob Posted Wednesday at 08:57 PM Share #4 Posted Wednesday at 08:57 PM On my island, it is impossible to get any spray cans imported since years. It´s not due to poisonous ingredients, it´s because they changed the type of plane, which transports them and some rules apply to the newer ones. I use Mr. Surfacer from the jar since then. It sprays absolutely fantastic, thinned with Mr. Leveling Thinner. I have grey, black and white with the grade from 1000 to 1500. Tamiya rattle can primer was more convenient, but I adapted. Cheers Rob Canute, mtaylor, realworkingsailor and 1 other 4 Quote Current builds: Shelby Cobra Coupe by DocRob - Model Factory Hiro - 1/12 McLaren Mp4/6 - Ayrton Senna - Fujimi - 1/20 - paused Duchess of Kingston - paused Finished builds: F4U-1A Corsair - Tamiya 1/32 USS Arizona 1/350 Eduard Caudron C.561 French Racing Plane 1/48 Nachtigall on Speed Arado 234 B-2N by DocRob - 1/32 - Fly Renault RE20 Turbo - Tamiya - 1/12 P-38J Wicked Woman - Tamiya - 1/48 AEG G.IV Creature of the Night - WNW - 1/32 "Big Tank" Crocker OHV motorcycle by DocRob - Model Factory Hiro - 1/9 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.