Jump to content

Recommended Posts

Posted

I am new to this hobby. I am building the Muscongus Bay lobster smack. The folks at Model Shipways recommend plastic wood to fill in the gaps in the hull planking. I tried that but I also found this Vallejo plastic putty. I found it works better in small spaces. Is there a reason I should not be using this on wood. It seems to be for plastic models 

Posted

 Firstly, welcome to MSW, DS. Secondly, IMHO, Vallejo plastic putty is dang near useless on wood models. I wouldn't use it as planking filler. 

Current Builds:  1870's Sternwheeler, Lula

                             Wood Hull Screw Frigate USS Tennessee

                             Decorative Carrack Warship Restoration, the Amelia

 

Completed: 1880s Floating Steam Donkey Pile Driver                       

                       Early Swift 1805 Model Restoration

 

 

Posted

I use Squadron White Putty to fill small gaps that will be painted (it is white and stands out like a sore thumb if not painted).

 

If you are filling larger gaps and cracks in hull planking there are better fillers. There was a lengthy discussion on the Forum a month or two ago about how to make wood fillers using sanding dust from the wood you are using and mixing it with something like white school glue (Elmer's Glue All or similar) that dries colorless. Smear the paste into the cracks and sand it after it dries.

 

If the gaps are pretty wide (1 mm or 0.039 inch) I just shave off a thin strip of wood, taper the ends as necessary, and glue it into the crack. Use the same wood that you are planking the hull with and the filler will not be noticeable.

Phil

 

Current build: Vanguard Models 18 foot cutter

Current build: USS Cape MSI-2

Current build: Albatros topsail schooner

Previous build: USS Oklahoma City CLG-5 CAD model

 

Posted (edited)

my carpentry experiance, ive always used elmers wood putty. it doesnt shrink, its very easily sanded and holds to wood very well. 

 

as mentioned above, wide gaps should be fitted with wood as best as you can, then use the putty as a finish coat to seal smaller gaps. 

 

https://www.homedepot.com/p/Elmer-s-4-oz-Carpenter-s-Wood-Filler-155876/311643947

 

 

Edited by paul ron
Posted

In addition to Elmers wood filler, I use Bondo Glazing and Spot Putty to fill "small" gaps and imperfections. Have used it for many years on wood and metal fittings. Its relatively inexpensive, comes in a small tube, dries fast, easy to sand. However, not stainable.

  • 2 weeks later...
Posted

Stay away from using putty designed for plastic models.  They will shrink during drying often requiring a second putty application.  The plastic putties dry harder than the surrounding wood and will sand differently.  IMHO, putty should only be used for small gaps or imperfections. I prefer making my own putty using sanding dust from the wood I am using and white glue such as Elmers.  Elmers also has a clear school glue which I haven't tried.  For premixed putty my preference is Elmer's wood putty.  It's texture and hardness are very compatible with wood.  It sands well also.  Ace Hardware also has a similar product sold under their own house brand.  Of course, nothing beats tight fitting joints to avoid gaps in the first place.  Good wishes to you in your ship modeling journey.  As you gain experience, every model you build will get better.

 

Welcome Aboard to Model Shipworld.

 

Wawona59

John

 

Next Project: Joshua Slocum's Sloop/Yawl Spray by Bluejacket Shipcrafters

 

Selected Previous Completed Builds:  Revell - 1/96 Thermopylae; Revell - 1/96 Cutty Sark, Revell - 1/96 Constitution, Aurora - Whaling Bark Wanderer, Model Shipways - 1/96 Phantom, AL - 1805 Pilot Boat Swift, Midwest - Chesapeake Bay Flattie, Monitor and Merrimac, Model Trailways - Doctor's Buggy

 

Posted (edited)

I use any of the different wood fillers in a tube mostly that are available.  I find LePage's in a tube works good, as does the Elmer's version.  One product I have conflicting thoughts on is the bigger tub where the wood filler has a more sandy texture and I find for filling any gaps in my models it just doesn't work as good.

 

To add:  For any styrene parts that I am doing (which is most of my various decks, as I build modern ships), filling in any gaps, I use the Tamiya putty that comes in a small tube - it has a strong odour, and hardens nice, but I am not sure how it would work with wood at all.  It is designed to be used with plastic.

Edited by JKC27

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...