egkb Posted January 18, 2014 Author Share #31 Posted January 18, 2014 Thanks J.. I was just over at your Build a moment ago Eamonn Did I mention that I love the Emma, I'm not sure if I did... ahem ahem Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 19, 2014 Author Share #32 Posted January 19, 2014 (edited) Just some photos of the latest additions (to go with my Post No. 32 above).. All the Bulkheads are glued in position, the deck is only 'dry-fitted' to assist in aligning the B/Heads. In the Stern on shot, you may just be able to make out the 'thinning' of the Keel where the Stern Post will go to assist later planking (it is the beginnings of the Rabbet) but following great advice I haven't extended the Rabbet forward, this won't be done until 2nd planking (Thanks again to all those who are helping me along, it is much appreciated!) Sláinte, Eamonn Edited March 21, 2014 by egkb jim_smits, olliechristo, Jay 1 and 3 others 6 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
NMBROOK Posted January 19, 2014 Share #33 Posted January 19, 2014 (edited) Hi Eamonn All looking shipshape and bristol fashion! Kind Regards Nigel Edited January 19, 2014 by NMBROOK egkb 1 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
trippwj Posted January 19, 2014 Share #34 Posted January 19, 2014 Off to a great start, Eamonn. Looks nice and squared off. egkb 1 Quote WayneNeither should a ship rely on one small anchor, nor should life rest on a single hope.Epictetus Link to comment Share on other sites More sharing options...
egkb Posted January 19, 2014 Author Share #35 Posted January 19, 2014 Thanks Nigel & Wayne, Yea!, so far so good.. famous last words eh! right up there with General Sedgwick commenting on his men ducking for cover.. "They couldn't hit an elephant at this dist..." (oft mis quoted I know but, sounds soooo much better ) Take Care Guys, Eamonn Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
craigb Posted January 20, 2014 Share #36 Posted January 20, 2014 Hi Eamonn That grove that I was telling you about on the bow stem to receive the hull planking. I did not have a picture of my own so I borrowed this one from a scratch schooner builder, it show just what I was trying to tell you, Enjoy. Regards Lawrence post-697-0-60141300-1386412523.jpg This picture is amazing, not only because it is a beautiful boat being hand-built, but it is... in the person's kitchen! I sense a very, very dedicated and tolerant partner lurking somewhere out of frame! cheers --cb egkb 1 Quote Current Build: Emma C Berry - Model Shipways - POF kit build Previous Build: Phantom - Model Shipways Next Build: Syren POB (MS/Chuck) then Pelikan POF (Hahn plans) Mini-tutorials etc --Build a plexi-glas display case --Emma C Berry photos from Mystic Seaport, CT Link to comment Share on other sites More sharing options...
egkb Posted January 20, 2014 Author Share #37 Posted January 20, 2014 Completely agree Craig, a very nice looking bit of work going on there! Thanks for the photo Lawrence, and it goes very well with your previous text, it does seem to be very 'Rabbet' like, and as such is indeed something which I will be doing (after 2nd planking in fact, to give a better idea as to where to put it exactly) Remember Folks All advice is welcome no matter how trivial you may think it is. Thanks in Advance Sláinte Eamonn Hopefully will be able to get some Filler Blocks done in the next day or two.. pictures to follow soon after trippwj 1 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
jim_smits Posted January 21, 2014 Share #38 Posted January 21, 2014 Looking good Eamonn. I might have to go back to my Ballahoo soon as you'll ovetake me very shortly....! egkb 1 Quote Jim-----Current builds:HMS SnakeHMS HoodMechanical Solar SystemCompleted builds:HMS Ballahoo Link to comment Share on other sites More sharing options...
egkb Posted January 21, 2014 Author Share #39 Posted January 21, 2014 Latest Update Hot off the Press.. Bulkhead Fillers are almost done, just have the Aft most pair to do tomorrow (those between No 10 & 11 B/Heads, they will need to be tapered to fit No 11 as it slopes backwards) They have really made the whole structure rigid! I feel now that I can bevel away happily without having to pick bits of bulkhead up from the floor, ah jeez! there are those 'famous last words again..' Will hopefully have some photos tomorrow as it is too dark here at present. Thanks for checking in folks. Sláinte Eamonn NMBROOK 1 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 22, 2014 Author Share #40 Posted January 22, 2014 (edited) Photo Update to go with Last Post above.. Got the last of the Filler Blocks in place, some were roughly bevelled/shaped prior to being glued in place. They will be properly shaped together with the Bulk Heads as soon as the glue has set on the last of the Blocks. Tip of the Day, If using the same style of 'Keel Clamps' as I have (2 pair of 90 degree angle pieces, screwed to the build board) be sure to leave them 'loose-ish' before putting the Filler Blocks in place, as you may end up with the devils own job of getting your nice precious build free of them other wise! (on account of not being able to unscrew them afterwards) This almost happened to me but I spotted the issue in time! Phew 2nd Tip of the Day.. and this one is a doosey!!! Check your Measuring Devices.. Why you might ask? Well in my job I have spotted rather substantial differences between Rulers, 5mm difference between 2 separate 30cm rulers when laid together! So if you ever wonder how a 'twice or three times' checked measurement ends up wrong, then do please check your measuring devices (particularly if you use more than one measurer) Hope that makes sense.. Anyhoo Here's the Photos.. Sláinte. Eamonn Edited March 21, 2014 by egkb tkay11, Dubz and NMBROOK 3 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 23, 2014 Author Share #41 Posted January 23, 2014 (edited) Newsflash.... - Bulkheads and Filler Blocks are now all bevelled/shaped . - Stern Counter Frames are gluing as we speak. - False Deck has been dry fitted & sanded flush with the edges of the bulwarks. - Stern Counter & Stern Facia removed from their 'matrix' and sanded, I removed the Stern Counter early to help the 4 X Counter Frames in line as they glued. - Bulwarks are soaking in water prior to being gently shaped around a 'straight sided' mug. Thanks Jim for that tip, see his Ballahoo build to see what I mean at 'HMS Ballahoo by jim_smits'. Here are a few photos of the Shaped Bulkheads and Blocks, compere them to the shots from yesterday above to see the difference. Thanks for checking in Bye for Now Eamonn Edited March 21, 2014 by egkb Jonny 007, jim_smits, olliechristo and 3 others 6 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
tkay11 Posted January 23, 2014 Share #42 Posted January 23, 2014 Very satisfying when it starts taking shape like this. Looks nice and smooth. Tony egkb 1 Quote === First build: Caldercraft HM Cutter Sherbourne 1763 FINISHED 2nd build: Triton cross-section COMPLETED 3rd build: La Chaloupe Armée / 42ft Armed Longboat of 1834 by tkay11 – scale 1:36, plans by M. Delacroix COMPLETED 4th build: Allège d’Arles 1833 (Ancre) POB by tkay11 – scale 1:100, plans by F. Fissore COMPLETED Working on La Jacinthe 1:96 POB (ANCRE publications) Link to comment Share on other sites More sharing options...
egkb Posted January 23, 2014 Author Share #43 Posted January 23, 2014 Totally agree Tony, when it gets to the point where you can easily visualise the lines of an actual boat you do kinda get that happy feeling.. this is of course just before you glue the bulwarks on upside down of something and the 'warn fuzzy feeling' is replaced with a feeling that is a lot less 'fuzzy'... :mellow: Thanks for looking in Tony, and thanks too for the 'like' Jim. Eamonn Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
NMBROOK Posted January 23, 2014 Share #44 Posted January 23, 2014 Just catching up with your newsflash Eamonn Looking good Kind Regards Nigel egkb 1 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
egkb Posted January 23, 2014 Author Share #45 Posted January 23, 2014 Thanks Nigel.. Re My News Updates.. CNN are quaking in their boots! we won't even mention what Sky News are saying.. Eamonn NMBROOK 1 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
NMBROOK Posted January 23, 2014 Share #46 Posted January 23, 2014 I will look to see if you are on News 24 Kind Regards Nigel egkb 1 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
egkb Posted January 24, 2014 Author Share #47 Posted January 24, 2014 Latest Hot off the Press... - Have painted the areas that may be visible beneath the various gratings black. - Have glued the 2 Stern pieces (Fascia & Transom) in place. - Have 'bulked-up' the top of Bulkhead No 3, it didn't meet up with the Bulwarks when I dry fitted them after overnight bending around the mug. - I also 'bulked-up- the bottom of Bulkhead No 2 where it came up short to the base of the false keel, it now has a more satisfactory 'run' - Sanded and generally tided up the last 2 above points above. Next Bulletin soon... cue 'busy & important' music.. fade out. Eamonn trippwj and NMBROOK 2 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
olliechristo Posted January 24, 2014 Share #48 Posted January 24, 2014 Looking ship shape.. You.are really making sure everything is thought out.. I like it all. Can't believe your two rulers could be that much out!! Ollie n egkb 1 Quote Current and 1st build - http://modelshipworld.com/index.php?/topic/3958-hm-colonial-cutter-mermaid-by-ollie-modellers-shipyard/page-47 Second Build -http://modelshipworld.com/index.php?/topic/6815-hmb-endeavour-by-oliver-al-kit-160-kit-bashrehash-second-wooden-ship-build/ Link to comment Share on other sites More sharing options...
egkb Posted January 24, 2014 Author Share #49 Posted January 24, 2014 Hi Ollie, thanks for popping over from your build.. The rulers were in work! and the differences were amazing (we have a load of them at various places and I was getting some odd results, that's when I spotted the differences, not so much of a problem if you are just using the same one all the time.. but when you take a measurement and take that measurement someplace else then you have issues) I have just come downstairs from fitting and gluing the deck in place, no photos yet as the whole thing looks like a Hedgehog with pins and clamps holding the athwartships camber in place against the natural curve of the deck in the Fore & Aft (it looks like a Saddle ) Will let the glue set then tomorrow will see how the Bulwarks work out, there seemed to be some strange stuff going on at the very tip of the bow when I dry-Fitted them, I refer to where the Port & Starboard Bulwarks meet up, doesn't seem to be much room for the Bow Timber piece and even less room for the Bowsprit to poke through (I offered one of the 6mm Dowels up to the hole and no chance of it fitting, even though it will have a taper! I rather suspect that the 2 bulwarks DO NOT actually meet up but leave a slight gap, which will be planked later on (the Plan seems to have them meeting though) If anyone has any thoughts or if the other Ballahooers out there have seen this then do please let me know what you think. Cheers For Now Eamonn Oh and thanks for the like Nigel, and to all the others who have taken a wee looksee at my build. olliechristo and trippwj 2 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
NMBROOK Posted January 24, 2014 Share #50 Posted January 24, 2014 Hi Eamonn You will have to take a picture tomorrow with the bulwarks in place so we can have a looksee.My gut feeling is to ensure that they run true with the hull and adjust as necessary later at the tip.Because of the acute angles involved(just like your rabbet line )I think it is a big ask of caldercraft that this end detail would be perfect.I won't be online till later tomorrow. Kind Regards Nigel egkb and olliechristo 2 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
egkb Posted January 24, 2014 Author Share #51 Posted January 24, 2014 Thanks again Nigel, a photo will be making its way to MSW tomorrow. All the Best Eamonn NMBROOK and olliechristo 2 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 25, 2014 Author Share #52 Posted January 25, 2014 Thanks for checking in Lawrence, hopefully we'll have a few photos later today (it's 2 in the morning over here, and am about to call it a night ) Take Care Mate. Eamonn Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 25, 2014 Author Share #53 Posted January 25, 2014 (edited) All Righty Then, here are those promised photos.. The Bulwarks are dry fitted only, the issue I was having doesn't seem to be sooo bad this morning (the issue was that there didn't seem to be a whole lot of room for the Bow piece and the Bowsprit to fit, the photo shows the Bow Piece too) Well, the Bowsprit issue is resolved as the Plan actually calls for this hole to be enlarged, Lesson Here.. Examine the Flippin Plans :mellow: my other issue, AKA 'Why wont the Bow Piece Fit?' can probably be addressed using the same solution as per the Bowsprit and that is 'File the Bulwarks down a bit !' Simples.. The other photos show the Transom and Stern Fascia fitted in place. Next Up, Glue the Bulwarks in place (after a touch of judicious filing of course for the Bow Piece Gap, I won't go tooo mad on the Bowsprit Hole just yet, as this spar has to taper somewhat!) Then onto Planking, and this inevitably is where it all goes pear shaped.... Thanks for looking in, and remember if you see me doing something you think I shouldn't then feel free to put me right ( I usually mention in advance what my next steps are) Call it a Build by Consensus ! Bye For Now, Eamonn Edited March 21, 2014 by egkb Stockholm tar, Jonny 007, olliechristo and 4 others 7 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 25, 2014 Author Share #54 Posted January 25, 2014 You are dead right Lawrence, it kinda makes you want to just keep looking at them ! and imagining the shape and lines. Sláinte Eamonn Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
egkb Posted January 25, 2014 Author Share #55 Posted January 25, 2014 (edited) Ok then, we have the Bulwarks glued in place, No End of 'Faff' involved there as plans say to be sure that it reaches the top of all bulkhead 'Horns' well that aint gonna happen as said horns vary in height somewhat! also if you keep the tops all level (Bulwark & Bulkhead Horns) then you are unlikely to meet the top of the transom, so I had to 'interpret' it a bit by keeping Transom /Bulwarks Level, some of the midships B/Heads Level and the Fore Most B/H level. Later when I do the Sherbourne this will have to be done exactly as the Cannons won't fit if the Bulwarks are misplaced! but on the Ballahoo it shouldn't be a problem as there is no ordinance towards the stern (Oh Oh! those famous last words again.. :mellow: ) I'll cut out the Capping Rails tomorrow to make sure the Lines of the Bulwark are ok in relation to it, so there is no guarantee that they are in their final position!! Below is a quick photo of todays work.. Bye For Now. Eamonn Edited March 21, 2014 by egkb trippwj, JayCub, jim_smits and 1 other 4 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
NMBROOK Posted January 25, 2014 Share #56 Posted January 25, 2014 Hi Eamonn Looking at the pics,my only concern is the gap is tapered and not parallel.Have you checked the height of the bulwark right at the tip of the bow?Just worried incase the very front of the bulwarks wants to go up a bit,this would make the gap parallel.If all is ok,I would try and bridge the gap with some ply offcut from the bulwarks and then fill otherwise this area may be prone to cracking. Kind Regards Nigel egkb 1 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
egkb Posted January 25, 2014 Author Share #57 Posted January 25, 2014 Hi Nigel, I have just had a look at it now that it is actually glued in place and fitting a little better, and all seems 'fairly' parallel, I chose to go with a slight opening at the top which removed the taper, I also filed out a little gap to accommodate the Bow Piece! Also I couldn't wait until tomorrow and cut out a Cap Rail to test the lines.. PHEW all seems ok! I'd say about 85% of perfect (nothing sticks out where it shouldn't !) and there is enough 'play' in the cap rail should any discrepancies show up later. Thanks for the help Nigel, always appreciated! Take Care Mate Eamonn NMBROOK 1 Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄 Link to comment Share on other sites More sharing options...
NMBROOK Posted January 25, 2014 Share #58 Posted January 25, 2014 Hi Nigel, I have just had a look at it now that it is actually glued in place and fitting a little better, and all seems 'fairly' parallel, I chose to go with a slight opening at the top which removed the taper, I also filed out a little gap to accommodate the Bow Piece! Also I couldn't wait until tomorrow and cut out a Cap Rail to test the lines.. PHEW all seems ok! I'd say about 85% of perfect (nothing sticks out where it shouldn't !) and there is enough 'play' in the cap rail should any discrepancies show up later. Thanks for the help Nigel, always appreciated! Take Care Mate Eamonn No Problem mate,I think our posts crossed in cyberspace because you hadn't posted that update when I was writing my post Yours will get priority anyway,working for CNN Kind Regards Nigel egkb 1 Quote Currently working on Royal Caroline Link to comment Share on other sites More sharing options...
sawdust Posted January 25, 2014 Share #59 Posted January 25, 2014 Hello Eamonn. I took time yesterday to go through your log from start to finish. Good work and problem solving I will enjoy following your progress. Enjoy the journey, Kip Quote Link to comment Share on other sites More sharing options...
J Haines Posted January 26, 2014 Share #60 Posted January 26, 2014 Hello Earmonn.. How long is the hull on this model,,, from bow to transom? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.