Jump to content

Le Mirage by fnick - Corel - 1:75 - wood


Recommended Posts

Hi all

 

Thank you for the likes and comments. I've updated the post about the saw with my initial thoughts (link kindly provided by Russ. Thanks saved me a job!)

 

Yes the saw is scary but I can see it is easy to become complacent or forget. That's why I've put a list of dos and donts on the saw itself in red so I've got no excuse! 😉 (think you can just about make the words out in the photo above). All common sense stuff but doesnt hurt to make sure!

 

Nick

Link to comment
Share on other sites

  • 2 weeks later...

Afternoon all

 

I've started applying a coat of Danish oil. Here's a before on one side and after on the other! 😁. Bit of a difference as you can see! I'm sure I'll get used to it.

Before...IMG_20181003_083917167.thumb.jpg.856aee3f350155e75b58d99937214e65.jpg

and after...

IMG_20181003_083901419.thumb.jpg.659d31f4abb9c182ce65a960cf4a6a2b.jpg

Both pictures were taken in the same lighting conditions. Maybe a tad darker than I was expecting but still very pleased as to how it's slowly coming together.

 

Thanks for looking

 

Nick

 

Link to comment
Share on other sites

  • 2 months later...

Evening all

 

In today's episode of "Pimp my Ship"... OK nothing that exciting I'm afraid. But I do have the first lot of gold columns supporting the handrails done. Nice to start adding a bit of detail! :) Next up I need to build a couple of the deck guns (two different sizes) as some round gun ports need to be drilled on the sides and I want to make sure I get the height right!

 

IMG_20181204_205627962.thumb.jpg.b342dc69865331f130af9920e2eef1a8.jpg

IMG_20181204_205411162.thumb.jpg.37986f553b6cf182749f33a3691ad212.jpg

As always thanks for visiting.

 

Nick

Link to comment
Share on other sites

Looks great Nick.  The colors are all complementing each other nicely.  Fantastic!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Beautifull ship and you did a awsome job on the planking part! Don’t mind the speed, the sharpness and cleannes of your work is only what’s important. When your model is finished,, that is what other people will notice, not the speed of the build. 

 

Keep following along the way sir, if you don’t mind...:)

Edited by Katsumoto
Link to comment
Share on other sites

Thank you very much for the kind comments! :)

14 hours ago, Landlubber Mike said:

The colors are all complementing each other nicely

That's one of the main reasons I chose this model, "painting with wood" as someone else put so well. I'm glad the oil has deepened the colour of the wood. Personally I think that this tones down a bit the gold from the columns (and the rest of the decorations to come).

5 hours ago, Katsumoto said:

Keep following along the way sir, if you don’t mind...:)

I don't mind at all! 

 

Nick

Link to comment
Share on other sites

  • 2 weeks later...

Morning everyone

Small amount of progress. First cannon build. Got a smaller one to do and I can start drilling the round gunnports.

IMG_20181215_225103828.thumb.jpg.41a83cd55407c1c7fa0c5505e5e27f57.jpg

The barrel was already as shown above but I used birchwood brass blacken on the trunnion. Worked really well. Quick and easy to use ( I have no affiliation with the company by the way).

Gun lines up pretty well with the existing gun port. Phew! 😀

IMG_20181215_225221854.thumb.jpg.d4f903a2285ead8d427c275cba88dcf6.jpg

Thanks for visiting

 

Nick

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...