Pete38 Posted May 28, 2016 Author #271 Posted May 28, 2016 Soon as work will let me have a little time in the shop. As far as how much to leave....I would try for around a 1/16 (1 to 2 mm) . The more accurate you are at setting the frames on the keel and keeping them aligned the less you would need to fair them in. hope that helps.. alde, Canute and mtaylor 3 Triton Cross Section 1:32 SEE YA LATER
Pete38 Posted July 31, 2016 Author #272 Posted July 31, 2016 Finally got to do some work, not a whole lot but moving forward litlle at a time, rafine, DocBlake, mtaylor and 6 others 9 Triton Cross Section 1:32 SEE YA LATER
mtaylor Posted July 31, 2016 #273 Posted July 31, 2016 Looking very good, Pete. Clean, crisp, tight joints. Canute 1 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Jimz66 Posted October 30, 2018 #274 Posted October 30, 2018 I can't see any of these images, Pete can you reload them? Thanks. paulsutcliffe 1 Current/But Not immediate Build Logs I am still gathering the tools I need but starting preliminary work. Nothing to show just yet. Fair American Armed Virginia Sloop.
Pete38 Posted November 3, 2018 Author #275 Posted November 3, 2018 Jim, Just as soon as I am able to find some time, Work is keeping me out of the ship yard and little time to do anything else. ☹️ mtaylor and Canute 2 Triton Cross Section 1:32 SEE YA LATER
Jimz66 Posted November 29, 2018 #276 Posted November 29, 2018 Copy that. I gotcha. Thank you. Canute 1 Current/But Not immediate Build Logs I am still gathering the tools I need but starting preliminary work. Nothing to show just yet. Fair American Armed Virginia Sloop.
Recommended Posts