DenPink Posted September 20, 2014 Author Share #31 Posted September 20, 2014 Hi Brian I will do the best I can. I don't think the admiral is looking forward to it though , will have to send her back to England for 6 years ha ha. Denis. edmay and Brian the extraordinaire 2 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 12, 2014 Author Share #32 Posted October 12, 2014 Hi all Ok yes I know it has been a long time ha ha. Now that the SoS is all finished it is time to turn my attention to the "Royal William". As I had a bit of time on my hands last night I thought I would sort all the deadeyes and blocks out as in the kit they all come in one bag. I was a little surprised that some of them need to be replaced but hey that is nothing new with kits as you all know. So it is chin up and just carry on with the build. Denis. Bill Hime, mtaylor and Bindy 3 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 12, 2014 Author Share #33 Posted October 12, 2014 Hi Brian Yes I agree with you the Deadeyes and Violin blocks are OK. It was the rigging blocks 1 and 2 hole blocks that I was disappointed with. I have some of Chuck but not used them yet so will have a look at what I have and order more. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 12, 2014 Author Share #34 Posted October 12, 2014 Hi Brian I am not getting at Euro Models at all I do like this kit. Like I said before I do think that ALL kit manufacturers should take a good long look at themselves. What ever happened to Quality Control , yes I know you cannot get every hole in the blocks correct but when some are 1mm out from the others it makes you wonder. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 13, 2014 Author Share #35 Posted October 13, 2014 Hi Brian I have not had time to look at all of the kit yet. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 13, 2014 Author Share #36 Posted October 13, 2014 Hi Re blocks, I have just ordered some new blocks from Syren"s. Denis. mtaylor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 14, 2014 Author Share #37 Posted October 14, 2014 Hi Well I have dived into the RW box. I have dry fitted the frames, some are a bit loose and will need packing out ( about 0.50 x 5mm ). Denis. Visi, Bindy, mtaylor and 11 others 14 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
Keith_W Posted October 14, 2014 Share #38 Posted October 14, 2014 I see that your kit has the same problem as mine. Bulkheads "C" and "D" do not reach all the way down to the level of the false keel. I had to shim these prior to bevelling. I can also see the the top of bulkhead "F" does not sit level with bulkheads B-E. Same with mine DenPink 1 Quote Regards, Keith 2007 (completed): HMS Bounty - Artesania Latina 2013 (completed): Viking Ship Drakkar - Amati 2014 (completed): HMS Bounty Launch - Model Shipways Current: HMS Royal William - Euromodel Link to comment Share on other sites More sharing options...
Visi Posted October 14, 2014 Share #39 Posted October 14, 2014 Hi Well I have dived into the RW box. I have dry fitted the frames, some are a bit loose and will need packing out ( about 0.50 x 5mm ). Denis. Hi Denis... Just subscribed to your new build of the RW - and will follow with interest. I have just sculled a Beer, Strapped myself into a Roller Coaster and waiting for the Wild Ride to begin. I know you won't disappoint Good Luck - visi DenPink 1 Quote Link to comment Share on other sites More sharing options...
DenPink Posted October 14, 2014 Author Share #40 Posted October 14, 2014 Hi Keith Yes I did notice them. I was only dry fitting them as I could not help my self to start her ha ha. I am now in the dog house , the wife said I could not start till the room is painted . Never mind the kennel is nice and warm. Denis. edmay, CaptainSteve and Bindy 3 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 14, 2014 Author Share #41 Posted October 14, 2014 Hi Denis... Just subscribed to your new build of the RW - and will follow with interest. I have just sculled a Beer, Strapped myself into a Roller Coaster and waiting for the Wild Ride to begin. I know you won't disappoint Good Luck - visi Hi Visi You are more than welcome to subscribe to the build of the RW my friend. Denis Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 14, 2014 Author Share #42 Posted October 14, 2014 Hi Brian Yes you do , it is about the same size as the SoS. The only thing is it's harder ha ha. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 14, 2014 Author Share #43 Posted October 14, 2014 agree, its twice as difficult as SOS but you will have no problems with it. Hi Brian I hope you are correct , but I will do my best. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 14, 2014 Author Share #44 Posted October 14, 2014 Hi Brian Thank you for the info, yes I do understand that . Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 21, 2014 Author Share #45 Posted October 21, 2014 Hi All Just a quick update . Started to fit the spacers in between the frames. Denis. maggsl_01, CaptainSteve, riverboat and 11 others 14 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 22, 2014 Author Share #46 Posted October 22, 2014 Hi all Before I post any more photos etc. I would like to thank Jim of Byrnes Model Machine tools. Without his tools I don't think I could have cut the spacers so accurately. I overcut the spacers on the table saw and finished with the disc sander, all cuts and sanding are dead square. Denis. Bindy, mtaylor, Brian the extraordinaire and 1 other 4 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
maggsl_01 Posted October 22, 2014 Share #47 Posted October 22, 2014 Hi Denis, this tool-Thing sounds quite perfect. Do you have any link to the machine? I dont know if in Germany any similar tool can be found, bit with a Picture or description I can perhaps find a way. I am always a Little bit angry when the cuts dont get into a real perfect shape... Thx Cheerio Max DenPink 1 Quote Next: Friedrich Wilhelm zu Pferde by Euro Model 1:47 Finished: Half Moon Corel; HMY Royal Caroline Panart; HMB Endeavour Occre 1:54; Fregatte Berlin, Corel, 1:40 A life without dogs is possible... but worth to live? Link to comment Share on other sites More sharing options...
Visi Posted October 22, 2014 Share #48 Posted October 22, 2014 Hi all Before I post any more photos etc. I would like to thank Jim of Byrnes Model Machine tools. Without his tools I don't think I could have cut the spacers so accurately. I overcut the spacers on the table saw and finished with the disc sander, all cuts and sanding are dead square. Denis. Denis Do you have any pics of your Byrnes Tools? - visi DenPink 1 Quote Link to comment Share on other sites More sharing options...
pirozzi Posted October 23, 2014 Share #49 Posted October 23, 2014 Nice work Denis as usual. Vince P. DenPink 1 Quote Link to comment Share on other sites More sharing options...
DenPink Posted October 23, 2014 Author Share #50 Posted October 23, 2014 Hi Max If you go to the main page of MSW and scroll down on the right hand side you will see "Byrnes Machine Tools" just click on the link. As I know it they are hand made to order. If you want to see what they look like I have photos on my SoS log. Page 21 is the Table saw. Page 23 is the Disc sander. Page 25 is the Thickness sander. Hope this helps you. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 23, 2014 Author Share #51 Posted October 23, 2014 Hi Visi See above. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 23, 2014 Author Share #52 Posted October 23, 2014 Hi Vince Thank you my friend. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
edmay Posted October 23, 2014 Share #53 Posted October 23, 2014 Hello Denis,Wuf Wuf,should have,could have but didn't,with tail between your legs purrrrr to the Admiral,"yes dear I promise to paint the walls when the "Royale William" is finished,ha good luck,you need to get someone a nice gift !!!!, A nice start to your build,will join the big audience and enjoy your masterly skills,Edwin DenPink 1 Quote Link to comment Share on other sites More sharing options...
DenPink Posted October 23, 2014 Author Share #54 Posted October 23, 2014 Hi Edwin I have started painting well not painting but moving things ha ha I have taken the pictures off the wall and some books have gone, you can only do so much in an hour. Then I start the "RW" build. You have to get thing in the correct order Edwin ha ha. Denis. Bindy, edmay, mtaylor and 1 other 4 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 25, 2014 Author Share #55 Posted October 25, 2014 Hi All Just dry fitted the lower deck. Next take it all out and start to glue in place. Denis Bindy, Kevin, popeye the sailor and 9 others 12 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
edmay Posted October 25, 2014 Share #56 Posted October 25, 2014 Hello Denis, nice start looks a little complicated and complex,was Brian right about the type of glue your using,what is the length overall.Edwin DenPink 1 Quote Link to comment Share on other sites More sharing options...
DenPink Posted October 25, 2014 Author Share #57 Posted October 25, 2014 Hi both Brian the glue is Titebond. Edwin with out looking I think it is the same as the SoS. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
DenPink Posted October 25, 2014 Author Share #58 Posted October 25, 2014 Hi Brian You got it, I also have the waterproof one, I think they are the best you can get. Denis. Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
popeye the sailor Posted October 25, 2014 Share #59 Posted October 25, 2014 is that a split deck? I'm looking at it wondering how you got it in there she looks good.......REALLY big lady! Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
DenPink Posted October 25, 2014 Author Share #60 Posted October 25, 2014 is that a split deck? I'm looking at it wondering how you got it in there she looks good.......REALLY big lady! Hi Popeye The lower deck is split in half as per kit, but to get it into position you have to cut it half again so you have got 4 parts. The first part to go in is the stern end, you do this by pushing it through the last bulkhead frame at the stern and just past the main mast location then bend it to the lower deck area, then keep pushing it to the bow area. Now it has dropped down to the lower deck area, you then push it back to the stern to make it fit, you do this about a zillion times to get it correct. Then you have got to do it 3 more times ( good fun I like doing this ) but I did dry fit them first before gluing, that I am doing now. I think she is the same as the SoS if that is Big ???. Denis. popeye the sailor 1 Quote Complete: Sovereign of the Seas - Mantua 1:78 scale Current build: Euro Model "Royal William" Scale 1:72 HMS "Revenge" Victory Model (Amati) Scale 1:64 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.