Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

Chuck Seiler

NRG Member
 View Profile  See their activity

  • Posts

    1,855

  • Joined

  • Last visited

 Content Type 

Everything posted by Chuck Seiler

  1. Chuck Seiler
    I wasn't aware that there were paddle wheelers in the middle ages. 😁
  2. Chuck Seiler
    Chuck, What did you use as a container?
  3. Chuck Seiler
  4. Chuck Seiler
    'Tis a common tale. Sometime very small details take alot of time and effort. You wonder if it is worth the time/effort, but later realize it is. A poor detail distracts from a good model.
  5. Chuck Seiler
    Sure, if I had the equipment to do that. But then I probably would not need the press we are discussing. Easier to spend the $10 at Amazon.
  6. Chuck Seiler
    I don't think the flex difference between an 8 inch half inch diameter steel rod and a 12 inch rod will be significant, at least for what I am working on.
  7. Chuck Seiler
    I missed your comment about the rods on Amazon. I'll check them out.
  8. Chuck Seiler
    No worries. thanks. The posts I have mic out at .508"/12.9mm x 12". Would it fit?
  9. Chuck Seiler
    Were you able to determine if the vertical post could be removed/replaced?
  10. Chuck Seiler
    Bob, Agree with all. I may check with Larry to see what collar options he has. Alternatively, I may just mount my older corded Dremel (I recently found while cleaning) that is symmetric. But, since one can never have too many tools, I am still eyeing the set--up Gregory is trying out.
  11. Chuck Seiler
    I have a Dremel drill press from Vanda-Lay (MSW sponsor). It is a great piece of equipment but is designed for older models of Dremel that were more symmetric. I am having trouble ensuring accurate alignment when I change out the drill. Most times it works fine, but with real precision, even 'a little off' is not good enough.. I got extended posts for my Vanda-Lay press. I believe they are 1/2" diameter. 12mm is .47" That may be an option. Larry at Vanda=lay sells those separately.
  12. Chuck Seiler
    If this was made of wood, no problem. Metal is not my forte. Where would one get one? What is the diameter of the post?
  13. Chuck Seiler
    The vertical shaft (?) on the original press is only 8.66 inches. At 5.31 inches in height, will this rotary table fit?
  14. Chuck Seiler
    Did you attach a vice to it, or s all your work free standing?
  15. Chuck Seiler
    TWO WEEKS LATER... Have you had opportunity to use the press more since last posting? Any further revelations?
  16. Chuck Seiler
    My error. You mentioned you were working with 1/32" material and my thought was you needed a blade smaller than that. I missed the fact that you wanted to make dadoes...which would have required the 1/32 blade. Personally, I use slotting blades because that is what the saw originally came with. They work for me and I am a creature of habit.
  17. Chuck Seiler
    It is coming along nicely. I am about at that stage mow and am studying the plans before I start rigging in earnest. There is at least 1 block assembly that needs to be placed on the mast before the shrouds and forestay are rigged. I don't recall if the rigging plan mentions that. Will you be mounting the sails? I don't plan on sails, myself, and I am trying to figure out how to handle the lines that would normally be attached to the sails...like the one running thru the slot on the mast.
  18. Chuck Seiler
    The blade you want will be dependent on your saw. I don't see where you mentioned it. The blade(s) would be dictated by arbor size and how much of the blade will stick up above the table. I have a Byrnes Saw and can use a 1.5 inch blade...maybe even 1 inch. I say that because with 1/32" material you will want a very thin blade but it need not stick up above the table much. The link for MALCO Gregory gave above is where you need to go. I am currently looking at "HIGH SPEED STEEL" "JEWELER"S SLOTTING SAW". Blade # JS114006120 is 1.5 inch diameter and .006 inches thick (.15 mm). There is a large selection to chose from. https://www.malcosaw.com/product/js114006120/
  19. Chuck Seiler
    Are they carbide or high speed steel?
  20. Chuck Seiler
    A #76 drill bit is .02" and #70 is .028". If those are too small for the chuck, I believe there are mini chucks availabe with 1/8" shaft that can be chucked into the drill, IIRC they go down to 0.
  21. Chuck Seiler
    I have seen that when evaluating drill presses, speed and torque are both issues to consider. Determining speed is easy, as it is almost always given. How do you determine torque?
  22. Chuck Seiler
    Richard, Well done!!! The Chesapeake Bay Maritime Museum replica has some sort of arrangement to hold the yard next to the mast. I have not fully figured it out yet...I will worry about it as soon as I get close.
  23. Chuck Seiler
    My recollection is that Olah's maritime archeologist husband Khorum (sp?) mentioned the yard in his review of the kit.
  24. Chuck Seiler
    Welcome aboard and Happy New Year. ~formerly from Warminster, PA
  25. Chuck Seiler
    Baltic birch used in model RC aeroplanes. Michael's used to sell it. Hobby shops, wood working stores, Amazon. Great quality. Various thickness down to 1/16", or less.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...