Chuck Seiler
-
Posts
1,852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Chuck Seiler
-
Buildboard with stem support. Lines were drawn perpendicular to the keel forward of each bulkhead slot in order to help true up the bulkheads. I am getting ahead of myself, however, and will discuss this later. This photo shows how the model sits on the board.
-
Let me start off by saying this is an extremely flimsey and fragile structure until the top strakes are in place. At that point it becomes just kind-of flimsey. It is important that care be taken to assemble the basic structure, to ensure it is ‘true’. Precision is important here. (Note: One of the other builders had a different concept. Blocks of wood were placed between the bulkheads to support the structure and the boat was planked completely from the garboard strake up to the gunwales. That eliminated that awkward ‘last plank between the top down and the bottom up which looks like a snake that swallowed a duck, a pig and 2 chickens. Hopfully that will be reposted.) My first step was to produce a “build board” in order to provide stability for future steps. The groove in the board and the stem support hold center-piece, keel and stem assembly perpendicular to the surface. I would have liked to support the stern, but in this case I was unable. (As it turns out, it is not really necessary except to keep the model from sliding out of the cradle as you turn corners at 60 MPH while transporting the model.)
-
I originally started my build log on 21 December 2012. I know this because I started it with “Thankfully the world did not end today, so I can proceed. I would hate to get halfway into it only to go “POOF”” Well, apparently it took a little longer but ‘the world’ ended and we now get to put it back together. Thank heaven for notes!!!! If anybody is taking a gander here before taking on this project I hope to provide some helpful thoughts and observations. This project involves the Model Shipways ‘18th Century Longboat”. It’s a great project. It appears to be simple and somewhat straight forward but the planking makes it a challenge. This is a single layer planking with both interior and exterior exposed to view. The planking is quite thin, leaving very little room for error. This is an excellent model to hone your planking skills. Plans are excellent. Once your ‘basic shell’ (more on that later) is set up I find that I can easily remove a plank/strake that does not work out and try again. (I have done a bit of work on the model since I originally wrote this. I DID have to remove a strake or two and try again. It is very forgiving.) Here goes!!
-
Ben, Thanks. I found it. Model looks great!!! I will have to spend more time looking at it and learning. I see yo umanaged to break off the stempiece as well. 'Tis a pesky little beastie.
-
Hello all! I am back. I jusat found out yesterday that the site went down completely, so I have spent some time getting back onboard and navigating the site. I will go thru my notes and attempt to re-create my build log. Comments welcome.
Our Emblem ®
